Washer Range/Range/Oven Surface Element Board Parts
Genuine Ge part
By: Ge
Part Number: WH12X10152
Washer won't advance through cycles or gets stuck? Timer controls wash cycle progression. Quick DIY repair—remove lid, unplug harnesses, swap timer.
Do-It-Yourself Stories from Customers like You
I replaced the timer switch on my ge front loader washing machine Ben W. • Transfer , PA • May 10, 2016
I took 2 screws out to remove the lid ,removed the knob unscrewed the 2 screws holding the timer unplugged 2 wire harnesses removed the old switch reversed the process to reinstall the new switch. It was very quick and easy every repair should be so simple
Read more
More
$224.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 809020007
This UI board assembly replaces the refrigerator's user interface/control board to restore button response and display feedback. It lets you reliably set temperatures and modes so the appliance accepts and shows commands correctly. What it does:
- Receives and processes user inputs from the control panel (buttons/touchpad) so selections register and run.
- Drives the front display and indicator lights so temperature, mode and status information is visible.
- Replaces a failed or intermittent interface that causes unresponsive controls, blank or garbled display, or incorrect status indications.
- Works with the main control to pass commands; replacing the board can isolate interface-specific failures.
What's included: One UI board assembly. Install notes:
- Disconnect power to the appliance before starting — this part is electronic and may be damaged by live power.
- Take photos of existing wiring and mounting before removal to ensure correct reassembly.
- Handle the board by its edges and avoid static discharge; use anti-static precautions if available.
- Reconnect all plugs securely and test functions before fully reinstalling trim or covers.
More
$291.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134994800
Fix washer display issues, water level problems, or cycle failures with this electronic control board. Manages wash cycles and system functions.
Do-It-Yourself Stories from Customers like You
Bad concrol board and switch too Samanatha M. • Vinton , VA • August 06, 2015
Replaced these parts with the order from your company.
Read more
More
$284.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006070
This is the main electronic control board that manages all washer functions, including cycle selection, water fill, motor operation, and spin speed. It is typically mounted inside the control panel or rear of the machine and connects to the various components via wire harnesses. Replace this board if the washer fails to start, stops mid-cycle, displays error codes, or if buttons and cycle selections are unresponsive.
Do-It-Yourself Stories from Customers like You
E 90 error code on frigidaire affinity washer Charles L. • Omaha , NE • June 02, 2015
We ordered a new control board for the washer after seeing other success stories to resolve this error. I have never done any work on a large appliance, but figured I'd give it a shot. All I needed was a screw driver and about 20 minutes and this was fixed. Works just as expected.
I ordered this part on Friday...it was at my doorstep the very next morning. Unbelievably fast turnaround which was a nice bonus.
Read more
More
$215.37
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 809020010
Fix error codes, blank displays, or cycle problems with this washer electronic control board. Restores proper operation when buttons don't respond.
Do-It-Yourself Stories from Customers like You
Display kit Michelle G. • Mesa , AZ • March 07, 2018
Watched UTube video and fixed very easily! Thanks so much
Read more
More
$283.22
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10404
Washer won't start or stops mid-cycle? Flashing lights or unresponsive controls? This control board assembly restores function. 10-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Washer began shutting off during the initial fill cycle after dealing with that for a few weeks the washer got to the point where it would not spin during the spin cycle Terry C. • South Roxana , IL • March 28, 2017
Installed new control board and that fixed the problems
Read more
More
$162.42
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH22X30717
Fix washer beeping, stopping mid-cycle, or not spinning with this control board. Moderately difficult repair requiring console disassembly and careful handling.
Do-It-Yourself Stories from Customers like You
It went crazy sometimes it worked others it would stop every few minutes beep then start again turned itself on in the middle of the night Wendell P. • Anacortes , WA • September 19, 2015
The diagnostic code readout was B2 which I could not find. I replaced the control board. Since I could return it if it was not the part that resolved the issue I chanced it and it was the fix. Thanks!!
Read more
More
$363.27
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: EBR86498812
Fixes washer that won't start, complete cycles, or respond to controls. This main control board restores electronic functions and display communication.
More
$377.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Samsung part
By: Samsung
Part Number: DC47-00036C
Heater assembly that maintains water temperature during wash cycles. Replace if leaking, cracked, or gasket is damaged. Mounts inside washer cabinet.
Do-It-Yourself Stories from Customers like You
Heater leaking at gasket after setting idle during vacation Robert R. • Wichita , KS • July 29, 2025
Used washer, gasket puffed up. No leak
Read more
More
$159.65
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10196
Fix a washer that won't advance through cycles or gets stuck during wash. This timer assembly controls fill, agitate, drain, and spin sequencing.
More
$132.74
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10399
Washer won't spin or start? This control board assembly manages cycle functions and restores normal operation. Mounts below the control panel.
Do-It-Yourself Stories from Customers like You
The washer would not spin out laundry. Don A. • San Antonio , TX • January 30, 2021
I replaced the mother board which is located below the control panel.
Read more
More
$126.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10457
Fix a washer that won't start, pauses mid-cycle, or has unresponsive buttons. This electronic control board restores normal operation and cycle timing.
More
$389.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10393448
Fix a washer that won't advance cycles, stops mid-wash, or has a blinking lid lock light. This electronic control board restores cycle operation.
More
$319.02
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10438110
Fix a washer that won't start, respond to buttons, or complete cycles. This electronic control board restores keypad and display function. Moderate DIY.
More
$308.68
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10405
Fix a washer that won't start, cycles changing unexpectedly, or unresponsive buttons. This control board restores electronic control. DIY install in 15 minutes.
Do-It-Yourself Stories from Customers like You
Would not start Kevin M. • Charlottesville , VA • February 23, 2016
Replaced control board
Read more
More
$168.56
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00424675
Display screen blank, dim, or showing only dots? This washer display module control board restores cycle status visibility and front panel control.
Do-It-Yourself Stories from Customers like You
Light went out @ display module Charles P. • Millbrae , CA • June 05, 2014
Replace circuit board
Read more
More
$222.95
Out Of Stock
Usually ships within 4 - 14 days