Washer User Interface Board Parts
Genuine Ge part
By: Ge
Part Number: WH42X10867
$360.95
- Compare At:
-
$403.01
- You Save:
-
$42.06
Genuine Ge part
By: Ge
Part Number: WH12X10478
Fix a washer that won't advance through cycles or skips fill/agitate steps. This timer controls cycle sequencing. DIY repair in about 30 minutes.
Do-It-Yourself Stories from Customers like You
The timer switch came detached from the bracket and the dial slot slipped out of the shaft until i saw the repair video i did not know about the clip that locks the dial to the shaft Jeffery B. • Donalsonville , GA • September 04, 2015
I removed the dial knob and plate as instructed by the video, removed the front panel of the washer to access the switch. I found the plastic molded bracket that the timer rests on to be broken and the tab on the timer where it is attached by a screw to be broken. I ordered a replacement switch, dial and knob. When it arrived I replaced the parts as instructed, but I had to use super glue to hold the new switch in place due to the support tab on the washer panel being broken off. After letting...
Read more
More
$124.37
- Compare At:
-
$165.50
- You Save:
-
$41.13
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 137005010
Washer won't start, stops mid-cycle, or displays error codes? The main control board manages all cycle functions. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Beeping problem Paul M. • Hyattsville , MD • June 17, 2014
I had a beeping problem with my washer whereby it kept on beeping when I turned it on. After researching the issue online I saw that the control panel was the issue so I ordered a new one and installed it and voila!!! Problem solved!!
It was an easy fix and the only hard part was lifting the dryer from the washer so as to replace the part.
Read more
More
$216.42
- Compare At:
-
$259.70
- You Save:
-
$43.28
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: EBR78263905
This power control board is the appliance's main electronic PCB. It manages power distribution and control logic, coordinating sensors and user inputs so the unit's motors, fans, heaters, and valves run when they should. What it does:
- Distributes and regulates power to key components through onboard relays
- Processes sensor feedback and timing to execute programmed operations
- Coordinates operation of motors, fans, heaters, and valves as required
- Common failure symptoms: unit won't power on or start, unresponsive controls/display, intermittent or erratic operation, repeated clicking from the control area, or error codes
What's included:
- 1 electronic control board assembly
Install notes:
- Disconnect power before servicing; verify power is off
- Use ESD protection and handle the board by the edges
- Photograph/label connectors and transfer plugs one at a time, ensuring proper seating and orientation
- Secure the board, reassemble covers, restore power, and verify normal operation
Do-It-Yourself Stories from Customers like You
No power of functionality Steven H. • Orlando , FL • June 03, 2017
I researched the problem online and tried to troubleshoot it by unplugging the machine and holding the start button for five seconds. I plugged it back in and still no response, which indicated it was most likely a bad Main PCB. I order the part and with Appliance Parts Pros' superb standard shipping service I received it a day and a half later. I removed the cover on the bad Main PCB, snapped a quick photo of the wiring and then installed the new Main PCB. I plugged in the washer and it...
Read more
More
$350.48
- Compare At:
-
$417.07
- You Save:
-
$66.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 285952
Washer stuck between cycles or skipping rinse? This timer controls cycle sequence and duration. DIY repair typically takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
My washing machine was getting stuck between cycles Robert G. • Flatwoods , KY • October 26, 2014
I knew the timer was bad. I went to the parts train website as i had done before. I found the part in just a few moments. It arrived in 2 days and I replaced the timer. 4 screws and 10 minutes was all that it took.
Read more
More
$241.95
- Compare At:
-
$287.92
- You Save:
-
$45.97
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10254
Fix a washer that won't cycle, skips rinse, or drains while filling. This mechanical timer restores proper cycle sequencing. DIY repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Clothes washer not cycling properly sometimes drains while filling for rinse skipping rinse cycle Anthony S. • Bloomsbury , NJ • April 29, 2016
Ordered new control from Appliance Parts Pros and installed it using online repair tutorial. Instructions not exact but close enough to complete replacement in approx. 20 minutes.
Read more
More
$174.95
- Compare At:
-
$208.19
- You Save:
-
$33.24
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10152
Washer won't advance through cycles or gets stuck? Timer controls wash cycle progression. Quick DIY repair—remove lid, unplug harnesses, swap timer.
Do-It-Yourself Stories from Customers like You
I replaced the timer switch on my ge front loader washing machine Ben W. • Transfer , PA • May 10, 2016
I took 2 screws out to remove the lid ,removed the knob unscrewed the 2 screws holding the timer unplugged 2 wire harnesses removed the old switch reversed the process to reinstall the new switch. It was very quick and easy every repair should be so simple
Read more
More
$224.57
- Compare At:
-
$264.99
- You Save:
-
$40.42
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006070
This is the main electronic control board that manages all washer functions, including cycle selection, water fill, motor operation, and spin speed. It is typically mounted inside the control panel or rear of the machine and connects to the various components via wire harnesses. Replace this board if the washer fails to start, stops mid-cycle, displays error codes, or if buttons and cycle selections are unresponsive.
Do-It-Yourself Stories from Customers like You
E 90 error code on frigidaire affinity washer Charles L. • Omaha , NE • June 02, 2015
We ordered a new control board for the washer after seeing other success stories to resolve this error. I have never done any work on a large appliance, but figured I'd give it a shot. All I needed was a screw driver and about 20 minutes and this was fixed. Works just as expected.
I ordered this part on Friday...it was at my doorstep the very next morning. Unbelievably fast turnaround which was a nice bonus.
Read more
More
$215.37
- Compare At:
-
$258.44
- You Save:
-
$43.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH22X30717
Fix washer beeping, stopping mid-cycle, or not spinning with this control board. Moderately difficult repair requiring console disassembly and careful handling.
Do-It-Yourself Stories from Customers like You
It went crazy sometimes it worked others it would stop every few minutes beep then start again turned itself on in the middle of the night Wendell P. • Anacortes , WA • September 19, 2015
The diagnostic code readout was B2 which I could not find. I replaced the control board. Since I could return it if it was not the part that resolved the issue I chanced it and it was the fix. Thanks!!
Read more
More
$363.27
- Compare At:
-
$435.92
- You Save:
-
$72.65
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: EBR86498812
Fixes washer that won't start, complete cycles, or respond to controls. This main control board restores electronic functions and display communication.
More
$381.95
- Compare At:
-
$450.70
- You Save:
-
$68.75
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134558200
Fix a washer that loses power, won't spin properly, or has an unresponsive control panel. This electronic control board restores normal operation.
More
$168.69
- Compare At:
-
$199.05
- You Save:
-
$30.36
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10196
Fix a washer that won't advance through cycles or gets stuck during wash. This timer assembly controls fill, agitate, drain, and spin sequencing.
More
$132.74
- Compare At:
-
$258.86
- You Save:
-
$126.12
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10399
Washer won't spin or start? This control board assembly manages cycle functions and restores normal operation. Mounts below the control panel.
Do-It-Yourself Stories from Customers like You
The washer would not spin out laundry. Don A. • San Antonio , TX • January 30, 2021
I replaced the mother board which is located below the control panel.
Read more
More
$126.95
- Compare At:
-
$192.56
- You Save:
-
$65.61
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10457
Fix a washer that won't start, pauses mid-cycle, or has unresponsive buttons. This electronic control board restores normal operation and cycle timing.
More
$389.95
- Compare At:
-
$464.04
- You Save:
-
$74.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 809020008
Fix a washer that won't start, locks unexpectedly, or doesn't respond to buttons. This control board assembly restores electronic functions and display.
More
$288.95
- Compare At:
-
$340.96
- You Save:
-
$52.01
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10438110
Fix a washer that won't start, respond to buttons, or complete cycles. This electronic control board restores keypad and display function. Moderate DIY.
More
$302.39
- Compare At:
-
$342.34
- You Save:
-
$39.95
Out Of Stock
Usually ships within 4 - 14 days