Washer Control Timer Knob Parts
Genuine Ge part
By: Ge
Part Number: WH22X38441C
Washer won't start, spin, or complete cycles? A faulty main control board often causes these issues. Moderate DIY repair, typically under 30 minutes.
Do-It-Yourself Stories from Customers like You
Wouldn't allow "super" fill setting James L. • San Jose , CA • April 02, 2021
GE Washer m/n GTW460ASJ6WW would allow other fill levels, but when set to "super" it would never stop filling. Checked water inlet valve (by initiating a fill and unplugging the unit) to see if the inlet valve was sticking open, that was not the issue. Decided to replace the board even though it is a significant fraction of the cost of a new washer. Local appliance stores didn't have the board but APP did, and of course, they are open 24/7 while my local part stores have decided the weekend is...
Read more
More
$205.52
- Compare At:
-
$211.05
- You Save:
-
$5.53
Genuine Ge part
By: Ge
Part Number: WH01X10310
Replacement timer control knob assembly for washers. Installs on control panel to select cycles and settings. Needed when knob is cracked, broken, worn, or won't grip timer shaft.
Do-It-Yourself Stories from Customers like You
The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle.
https://www.youtube.com/watch?v=cQwLtRcHx9k
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Ge part
By: Ge
Part Number: WH01X24378
Control panel knob for selecting wash cycles. Replaces broken, cracked, or stripped knobs. Installs on the front panel—simply pull off the old knob.
Do-It-Yourself Stories from Customers like You
Knob broke off and the piece that rotated for the timer Kristi W. • Waxahachie , TX • August 25, 2019
Ordered a new timer and knob. The husband was able to fix in about 20 minutes and now works like new.
Read more
More
$12.32
- Compare At:
-
$14.66
- You Save:
-
$2.34
Genuine Ge part
By: Ge
Part Number: WE01X20378
Replace a cracked, broken, or missing control knob on your washer or dryer. This plastic dial installs on the front control panel for cycle selection.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Cracked start knob on my dryer Joe T. • Cape Coral , FL • August 12, 2014
Found the part through appliancepartspros.com The part was the cheapest of several web sites. although shipping for such a small part was steep ($7.95 If I was purchasing bigger parts or heavier parts..the flat rate cost would be a bargain.
The part arrived the next day and fit perfectly. In additon; obviously the original manufactured part was not holding up well as the new part had a metal reinforcement band that will prevent the cracking in the future.
Read more
More
$29.95
- Compare At:
-
$35.64
- You Save:
-
$5.69
Genuine Ge part
By: Ge
Part Number: WH1X2721
Control knob and clip assembly for dryer or washer. Attaches to control shaft to set cycles and settings. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Noisy(thump thump sweaks) when dryer was in operation Michale R. • Sinclair , WY • January 08, 2015
Replaced rear bearing, upper and lower felts, drive belt. Have repaired dryer before for same problem years ago, knew what to do, on line diagrams helped to move memory. Cleaned all accumulated lint out of machine.Belt was changed only out of age.Looked good but thought to be on safe side.
Read more
More
$12.44
- Compare At:
-
$18.05
- You Save:
-
$5.61
Genuine Ge part
By: Ge
Part Number: WH01X10462
The Control Knob with Clip is an OEM part for GE washing machines and dryers. This knob allows users to select and control various settings and cycles on their appliance with ease.
Causes of a bad Control Knob with Clip can include constant use leading to wear and tear, accidental impacts that may crack or break the knob, or exposure to harsh cleaning agents that can cause the knob's material to degrade over time.
Symptoms of a bad Control Knob with Clip include:
- The knob failing to engage with the control panel, making it impossible to select settings.
- Cracks or breaks in the knob that prevent it from being turned.
- The knob becoming loose or falling off due to a broken clip.
- Difficulty in accurately selecting cycles due to wear on the knob's indicators.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
My fiancée broke the knob and stud off the timer i needed to replace timer and knob Mariah R. • Panama City , FL • April 24, 2015
I first received the quality parts in less than 2 days. It took me 5 minutes to change out the timer and 2 of the minutes were finding where my fiancée put the Phillips head screwdriver. Unplug dryer first, remove top three screws from back panel. Pull old timer up and out, have new timer in hand and transfer one wire at a time. Once all wires are transferred, snap the new timer in its place. Replace your three screws, put knob on timer. Plug in dryer and test. Once completed, cleanup your...
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10374126
The Motor Control Board is an OEM part for Whirlpool washing machines. This electronic board is responsible for regulating and controlling the motor's speed and direction during various cycles, ensuring optimal washing performance.
Over time, the motor control board can fail due to electrical issues, power surges, or general wear and tear. When the control board malfunctions, it can disrupt the washing machine's operation and lead to various performance issues.
Symptoms of a bad motor control board include:
- The washer not spinning or agitating
- Erratic or unpredictable cycle times
- The washer stopping mid-cycle
- Error codes related to motor function
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Whirlpool wfw94hexw2 was giving error code f06 e01 (and e02 at times) Dean T. • Tigard , OR • December 11, 2014
The washer would try to start. The door would lock, but then would get stuck in the phase of start-up where the drum needs to roll around (I assume so it knows what's in there). It would sit and think about it for a couple minutes and then give the error codes. I shut it off (sometimes had to unplug it and plug it back in), and it would take about 10 minutes for the door to unlock. After reading about fixes, I decided to dive in and try it (the washer is only 3 years old and I'm pretty...
Read more
More
$311.88
- Compare At:
-
$322.08
- You Save:
-
$10.20
Genuine Ge part
By: Ge
Part Number: WH11X10049
Timer dial knob for washers. Installs on control panel to select wash cycles. Replace if knob spins freely, teeth are worn, or it won't engage cycles.
Do-It-Yourself Stories from Customers like You
The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle.
https://www.youtube.com/watch?v=cQwLtRcHx9k
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8536939
Secures control knobs to the panel on washers and dryers. Replace if the clip is broken, missing, or worn, causing knobs to fall off or sit loose.
Do-It-Yourself Stories from Customers like You
Washer would not start due to non working lid latch Corrinne E. • Batavia , IL • September 27, 2019
I purchased the lid latch assembly and the lid switch strike. Following the clear video instructions for each part, my handy teenage son was able to remove the lid latch assembly and replace it with the new part as well as the lid switch strike. The washer is back to working perfectly for under $100. Appliance Parts Pros carry the parts to repair and at a lower cost than other online retailers. I saved about $30 compared to the other online site and I saved a service call fee. I'm so glad I...
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Ge part
By: Ge
Part Number: WH12X10527
Fix a washer that won't advance cycles, spins continuously, or has erratic operation. This timer controls wash, rinse, and spin cycles. 10-minute DIY.
Do-It-Yourself Stories from Customers like You
Timer gears broken John M. • Belington , WV • November 01, 2014
Replaced timer.
Read more
More
$104.27
- Compare At:
-
$123.04
- You Save:
-
$18.77
Genuine Ge part
By: Ge
Part Number: WE01X23599
Control knob for washer and dryer settings selection. Mounts on control panel. Replace if broken, cracked, loose, or missing for proper operation.
Do-It-Yourself Stories from Customers like You
Knob broke. Renee H. • Durham , NC • December 20, 2019
Once the knob came I just put it on. It works well.
Read more
More
$30.95
- Compare At:
-
$36.83
- You Save:
-
$5.88
Genuine Ge part
By: Ge
Part Number: WH1X2754
Replacement timer knob assembly for washers. Installs on the control panel timer shaft. Needed when original knob is cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Broken timer knob Michael K. • Indialantic , FL • October 03, 2014
Easily replaced the knobs
Read more
More
$13.45
- Compare At:
-
$16.01
- You Save:
-
$2.56
Genuine Whirlpool part
By: Whirlpool
Part Number: W11419171
Fix a washer with a blank display, locked lid, or unresponsive controls. This electronic control board manages all wash cycles and functions.
Do-It-Yourself Stories from Customers like You
Control board Jackie S. • Rolla , MO • February 22, 2026
Replaced part
Read more
More
$282.30
- Compare At:
-
$294.04
- You Save:
-
$11.74
Genuine Speed Queen part
By: Speed Queen
Part Number: 806597
The Knob Assembly is an OEM component specifically designed for Speed Queen dryers. This assembly includes the control knob and integrated electronic components that allow for cycle and setting selection.
Causes of a defective knob assembly include normal wear of constantly rotated buttons, sun damage to exposed plastic knobs, and general use degradation of sealed electronic sensors over time.
Symptoms of a bad knob assembly include:
- Knobs or buttons that do not select cycles properly
- Faulty digital displays for time and settings
- Erroneous buzzers or error messages
- Unresponsive or stuck control functions
This OEM Speed Queen part is also compatible with products from American Dryer Corporation. Replacing the entire knob assembly restores full functionality to reliably control cycles on your dryer. Proper maintenance ensures long-term durability.
Do-It-Yourself Stories from Customers like You
Shaft broke off timer Mike B. • Owensboro , KY • August 10, 2025
New timer
Read more
More
$11.75
- Compare At:
-
$12.58
- You Save:
-
$0.83
Genuine Ge part
By: Ge
Part Number: WH01X10060
The Selector Knob is an OEM part for GE washing machines. This knob is used to choose different wash cycles and settings on the control panel, allowing users to customize their laundry preferences. It is designed to fit securely onto the control shaft and provide smooth operation for selecting various options.
Over time, selector knobs can wear out or become damaged due to frequent use or accidental impacts. Causes of a bad selector knob can include cracked or broken plastic, stripped or worn-out internal components, or a loose fit on the control shaft.
Symptoms of a bad selector knob include:
- Difficulty in turning the knob or selecting settings
- Knob spinning freely without changing settings
- Knob falling off or feeling loose
- Visible cracks or damage on the knob
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken selector knob Philip O. • Gastonia , NC • June 01, 2014
I ordered a new knob and it arrived very quickly. The repair was simple and I will use appliance parts pros again should I need to. Thank you.
Read more
More
$21.95
- Compare At:
-
$25.90
- You Save:
-
$3.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 134844410
The Selector Knob is an OEM part for Frigidaire appliances designed for use on various models of washers and dryers. This knob enables users to select different cycles and settings, providing essential control over the appliance's operations.
Symptoms of a failing selector knob include:
- The knob failing to engage or change settings
- Difficulty in turning or a lack of resistance
- Visual signs of wear such as cracks or breakage
Causes of selector knob deterioration typically involve continuous mechanical use, accidental impacts, or exposure to harsh environmental conditions that can weaken the plastic.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
Dryer knob was broken Karen H. • League City , TX • July 01, 2014
Replaced old knob with new knob
Read more
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51