Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replace your cracked or broken refrigerator kickplate grille. Installs at the bottom front for a finished look and proper airflow to condenser components.
This was as easy as it could possibly have been, from searching the site for the item, ordering and receiving the 'ship notice' the same day as ordering. Read more
Ice dispenser door stopped working? This coupling connects the drive motor to the dispenser door mechanism. Replace a broken coupling to restore ice dispensing.
My LG electric dryer stopped drying the other day and I searched on line for suggestions on what may have caused it to stop working. I came across AppliancePartsPros.com and quickly found some of the most common issues with my LG dryer. The problems were listed in the order of most common occurrence, and had extremely helpful and detailed instructions on how to not only diagnose the problem, they also showed exactly how to access and repair the issue. Unfortunately, it was late on a Thursday... Read more
Holds the ice dispenser chute door closed on your refrigerator. Replace if spring is broken, missing, or worn and the flapper won't seal properly.
The ice dispenser chute door had not been sealing for years. The ice cubes on the lower portion of the ice bin would melt enough eventually to then freeze up into a big, amalgamated blob of ice due to ambient air coming up the chute. This melt-then-freeze would happen, to the extent the chute froze to its own closure. Despite service technician visits over a period of six years nothing they did resolved the issue. I opened the freezer door to reach into the bin from the top to extract usable... Read more
Black plastic lever for refrigerator ice dispensers. Replaces cracked, stained, or calcium-damaged levers. Snaps into dispenser assembly housing.
Even though the refrigerator is 13 years old, I was able to find replacement parts on your site. The DIY video provided on-line for each of the four parts ordered was very helpful ; even though my refrigerator wasn't exactly like the one in the video, it was still helpful. I'm not usually the DIY type- but with your help the repair was very successful! Thank you ! Read more
Biscuit-colored cap that covers the water filter housing opening. Replace if cracked, broken, or missing. Measures 2.5 inches in diameter.
Replaced with new one and followed the instruction from the video that is on the order Read more
Ice dispenser jammed or grinding? A cracked baffle prevents smooth ice flow. This support aligns the auger inside the bin. Moderate DIY with video guide.
I found a video/tutorial on how to take it apart to see what was pieces were broken, then ordered the replacement parts and watched the video to put it back together again. Read more
Refrigerator top hinge and pin that mounts to the cabinet and supports the door. Replace if broken, cracked, or worn to restore proper door alignment.
Put the new hinges on the doors fyi you need to tell what size the screws are for the hinge kits would help a lot Read more
Ice won't dispense or bin tips forward? Replace your worn upper ice bin to fix jamming, spillage, and broken mounting prongs. Easy DIY with video guide.
Took the broken bin out and put the new bin in. all of maybe two minutes. Read more
Ice bin won't release or latch broke? This ice bin latch spring provides tension to secure the ice container properly. Easy 10-minute DIY fix.
Easy to remove the metal parts from the old bin. The only problem was that the screw that holds the adapter has red thread locker and screwdriver rounded off the head of the screw. Drilled the screw and heated the screw to loosen the thread locker and used an ease out to remove the screw. Read more
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
Supports your refrigerator at the base and lets you roll it forward for cleaning. Replace this roller assembly if cracked, broken, or seized to restore smooth movement.
I decided if one needed replacing I might as well both two--made sense to me. None were available locally so I ordered them on-line. Surprisingly they came sooner than I expected. I also found a video on the internet that clearly showed the procedure. The actual repairs took 15 minutes or less. One good suggestion from the video was to run the screw in and out of the wheel bracket before final mounting. The video also suggested putting something under the corner to eliminate tipping. The... Read more
Wire shelf for refrigerator freezer compartment. Holds frozen food items securely. Replace if cracked, bent, sagging, or missing to restore storage space.
I ordered one from you. Read more
Fix a water dispenser that stopped working or won't activate. This dispenser lever replaces broken actuator assemblies. Moderate DIY repair.
The water dispenser stopped working on my Sears Kenmore (Whirlpool) side-by-side refrigerator and after much research on the web I purchased the parts that commonly failed for this condition. I should have first taken the dispenser assembly apart but I didn't--it looked a little too intimidating to do twice. As it turns out, what actually broke was the plastic assembly that holds the water actuator switch in place so the dispenser lever could not strike it. I was able to secure it in place... Read more
Replacement mounting screw for securing range panels, brackets, and internal components. Replace missing, stripped, or rusted screws to restore fit.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Fix hot refrigerator walls or a non-spinning condenser fan. This motor drives airflow across coils to remove heat. Easy DIY install in 1-2 hours.
I found several "threads" on my google search which indicated that it might be caused by a non-functional condenser fan. I removed the back bottom panel and voila, the fan was not spinning even though the compressor was running and felt very hot. If I spun the blades, the fan would run, but as soon as the compressor shut off, it would not start up again without my help. The replacement part was easy to find at AppliancePartsPros.com. I ordered it and had it within 48 hours. I didn't even need... Read more
Replacement support stud that holds refrigerator shelves securely in place. Needed when original peg is broken, cracked, or missing from shelf wall.
Myself Read more