Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

1108870120 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Support Washer (1-1/2-In Dia)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3388703

This flat support washer provides a stable bearing surface under a fastener. Its 1-1/2-in diameter helps distribute load, maintain spacing, and keep components aligned so hardware stays tight and assemblies operate smoothly. What it does:

  • Distributes clamping force to prevent pull-through and gouging
  • Maintains proper spacing and alignment between mating parts
  • Helps reduce vibration, rubbing, or wobble from a loose assembly
  • Replaces a cracked, deformed, or missing support washer
What's included:
  • One support washer
Install notes:
  • Disconnect power and shut off water/gas before servicing.
  • Note the order and orientation of any washers/spacers during disassembly.
  • Inspect mating hardware and surfaces; replace any worn or damaged parts.
  • Tighten fasteners to manufacturer specifications—do not over-tighten.

Do-It-Yourself Stories from Customers like You Drum support bearing failure.   Myron D. • Covington , KY • July 13, 2018

Simple fix, right parts fast. Read more

More
$4.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Dryer Combo Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3952379

If your washer dryer combo won't advance through cycles or the knob spins freely, the timer likely failed. This mechanical timer restores proper cycle sequencing.

Do-It-Yourself Stories from Customers like You Timer for kenmore washer/dryer combo   Suzanne R. • Gainesville , FL • December 30, 2014

Replaced by handyman friend - looked up some details online - so nice to get a $100 part instead of a thousand dollar replacement!!! Read more

More
$189.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Dryer Front Bearing Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3394508

Supports the front drum edge for smooth, quiet rotation. Replace when worn to stop scraping noises or drum wobble. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Drum rear seal worn front bearing same   Joseph M. • Conshohocken , PA • February 20, 2015

Replace parts worn i repair appliance for60 years i am79 Read more

More
$60.52

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Dryer Belt Restrainer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3393657

Dryer belt slipping off motor pulley or making squealing noises? The belt restrainer keeps the drive belt aligned. Moderate DIY repair with video guide.

Do-It-Yourself Stories from Customers like You Loud squealing noise when dryer (Whirlpool) is turned on   Marc P. • Chesterfield , MI • December 31, 2018

Using You Tube How-To Videos. Replaced the drum drive belt and tensioner pulley/arm (including) the spring. Read more

More
$74.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Motor Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP660658

This part is a motor clamp. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or broken motor clamp on certain makes of indoor appliance models. Motor clamps are essential for properly securing the drive motor on various types of indoor appliances such as washers, dryers, and refrigerators. Without the use of a motor clamp, the drive motor is free to move around or become detached. This can easily cause serious damage to the equipment and prevent proper functionality. Proper tools are needed to replace this part and appropriate safety measures should be adhered to when working on any type of equipment. For accurate information on how and where to install this replacement motor clamp, specific manufacturer diagrams should be referred to.As an authentic replacement part, this motor clamp can be used on multiple different models of washers, dryers, refrigerators, and washer/dryer combos manufactured by Kenmore, Maytag, Whirlpool, and Amana. Please note that this motor clamp is a genuine part made of high-quality materials and is sold individually.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Motor was bad and also needed general maintenance.   Daniel E. • Litchfield , IL • April 14, 2020

Took it apart. Replaced various general maintenance parts, rollers, seals, clean out all the lint and replaced motor and put a new blower on it. Read more

More
$5.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Clip Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279220

Includes two bumpers and two locking clips. You will use one or the other depending on hole size.

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit   James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

More
$12.32

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Tub Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: W10880720

Replaces the upper tub ring that mounts on top of the outer tub as a splash guard. Order a new ring if yours is cracked, broken, or no longer securely attached.

Do-It-Yourself Stories from Customers like You Excessive vibration during spin cycle   Jackie H. • Dunbar , WV • September 10, 2018

This was the second attempt at fixing this problem. The first repair and parts were generated by listing the problem and reviewing the potential corrections, listed on the web site. From making repairs on other clothes washers, I was confident that some of those potential causes could have been the cause. Unfortunately the counterbalance spring and suspension springs were not the cause as they were attached as intended and in good condition. I reached out for Appliance Parts Pros input... Read more

More
$97.28

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Retainer Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: 285353

This retainer ring is a genuine OEM replacement part sourced directly from the manufacturer for use on front load washing machines to hold the boot seal in place. The boot seal is the gasket that seals the washing machine when the door is closed to prevent water from leaking. The retainer ring is located flush against the boot seal and has either a spring clamp or screw clamp that secures it. Over time, this ring may become damaged due to the washing machine's normal use and age. If the ring is not tight, the washing machine could leak when in use. If water is coming from the door, it is a good idea to inspect and replace the retainer ring and possibly the boot as well.Unplug the washing machine to prevent electrocution. Remove the front panel, the detergent dispenser, and the kickplate to access the retainer ring. Locate the clamp on the ring and loosen it. Remove the retainer ring and set it to the side. Inspect the boot and then install the new retainer ring. Tighten the clamp and reassemble the washing machine. This retainer ring is sold as an individual unit. It is designed specifically for washing machines manufactured by Whirlpool.

Do-It-Yourself Stories from Customers like You Washer would agitate but would not go into high spin sounded like spin was working though   Mario M. • Corona , CA • January 03, 2015

Im not a repairman, so all my knowledge to fix my washer came from either youtube or online chats. I posted this to help the next dad trying to save a few bucks. Door sensor... Since door sensor worked correctly, verified that by starting washer with door open, and agitate cycle would not start until door was closed. Meaning door sensor worked correctly. Timer... In high spin cycle washer sounded correcltly spinning, but when opening door, drum was was not moving. So timer was triggering... Read more

More
$5.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Motor Retainer Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10086010

Secures the motor to its mounting point in your laundry center. Replace if the retainer is worn, broken, or has lost tension to prevent motor misalignment.

Do-It-Yourself Stories from Customers like You The drive coupler was wore out upon fixing noticed clips were rusty and lost tension and start capacitor was badly corroded   James H. • Waterloo , IA • February 03, 2017

Replaced with new retainer clips and new capacitor to fix future problems Read more

More
$5.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Dryer Motor
Genuine Whirlpool part
By: Whirlpool
Part Number: 279811

Dryer motor used in washer/dryer stack units.

Do-It-Yourself Stories from Customers like You Dryer would shut off in med cycle would not restart for 20 min   Richard S. • Brigantine , NJ • February 05, 2017

Replaced the dryer motor Read more

More
$218.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Dryer Exhaust Duct Outlet Collar
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387911

Channels dryer exhaust to external vent connection. Replace if rusted, leaking, or screen is damaged to restore proper airflow and drying performance.

Do-It-Yourself Stories from Customers like You The vent on the air duct assembly had become rusted   Christy R. • Arlington , TX • August 04, 2015

My son and I took the back panel off the dryer and found that the dryer was full of lint. It was very dirty and probably explains why the dryer had no been working as well. We cleaned the dryer out, took off the old air duct assembly and replaced it with the new one. We also replaced the old dryer hose while we had it pulled out. The repair was very easy, simply a matter of unscrewing screws and then reattaching them. Based on how dirty the dryer was it is probably a good idea to check the... Read more

More
$153.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Anti-Rattle Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400516

Secures panels or brackets in your laundry center to prevent vibration noise. Replace missing, stripped, or worn screws to restore a tight fit.

Do-It-Yourself Stories from Customers like You No spin on spin cycle   Richard S. • Beaumont , CA • August 28, 2015

Replaced clutch assembly which was a little tricky, but very doable. Just make sure to take your time. I do have to say that I am very impressed with AppliancePartsPro customer service when the replacement part also failed. A new clutch assembly was at my door step a few days later. I now has a working washer again. Thanks Again Appliance Parts Pro. Read more

More
$7.56

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Resistor
Genuine Whirlpool part
By: Whirlpool
Part Number: 279872

This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.

  • Provides precise resistance to reduce voltage/current in the designated dryer circuit
  • Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
  • Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
  • Replace if visibly burned/damaged or if testing shows an open or shorted condition
What's included: One resistor Install notes:
  • Disconnect power to the appliance before servicing
  • Access the console/wiring harness and note original wire routing
  • Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
  • After installation, run a test cycle to ensure proper operation of the affected function

Do-It-Yourself Stories from Customers like You The dryer timer would advance to the cool down cycle but would not shut off a the end of the cycle.   John C. • Sunbury , PA • July 14, 2017

I thought the problem was the dryer timer, so I ordered a timer to make the repair. When the part arrived I wasn't sure how to install it because the wiring was slightly different from my timer. Before installing the timer, I had a friend run a meter test on the timer to verify this was the problem. After checking the timer it checked out as being ok, so with further research I found out that if the timer power resistror part is bad it would cause the dryer to not shut off at the end of the... Read more

More
$46.35

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP616099

This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.

  • Tightens around a hose and fitting to maintain a secure seal
  • Helps stop drips, seepage, or loose connections
  • Common fix when you see moisture around a hose joint
  • Useful if a clamp is rusted, stretched, or no longer holding tension
What's included: One hose clamp. Install notes:
  • Unplug power and shut off water (if applicable) before servicing
  • Note clamp position/orientation before removal
  • Use appropriate screwdriver or nut driver to tighten evenly
  • Do not overtighten—ensure a snug, leak-free seal without damaging the hose

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$4.60

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Dryer Timer 4-Cycle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3976584

If your dryer won't shut off or cycles won't advance, the timer may have failed. This 4-cycle timer restores proper cycle operation. DIY install in 40 min.

Do-It-Yourself Stories from Customers like You Timer & start switch had failed on my whirlpool dryer   Richard H. • Davenport , FL • November 07, 2014

Identified the parts I needed on the AppliancePartsPros.com website using the Dryer model number. Delivery was within 3 days by courier - excellent. Parts fitted, console reassembled and my dryer was back up and running within 40 minutes. No more intermittent problems with the timer not working - brilliant!! Read more

More
$169.71

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Agitator Drive Shaft
Genuine Whirlpool part
By: Whirlpool
Part Number: WP389387

Agitator won't move or slips during wash? A worn drive shaft causes weak agitation. This shaft transfers motion from the gearcase to restore firm engagement.

Do-It-Yourself Stories from Customers like You Agitator was not turning   Edward M. • Glen Allen , VA • March 10, 2019

I had to replace the drive shaft and the lower agitator. The motor coupling was also worn out. The repair was challenging because I had to rebuild the gear box. This step was really messy and I had to wait for the liquid gasket to set prior to completing the repair. Cleaning and prep of all of the parts tripled the repair time. Read more

More
$132.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google