Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Dispenser Switch is an OEM replacement part for Frigidaire refrigerators. It is a component that controls the operation of the water and ice dispenser, allowing users to conveniently access chilled water, cubed ice, or crushed ice from the refrigerator door.
Symptoms of a bad dispenser switch:
Causes of a bad dispenser switch can include mechanical wear and tear, electrical malfunctions, or physical damage due to mishandling or impact.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
I had the original sensors in my Frigidaire, which were now about 18 years old. The water dispenser would work, but I would have to push in the lever and then draw it back until it found that "sweet spot." I finally got annoyed enough with the problem that I looked online. I almost purchased the dispenser actuator (the paddle), and glad I didn't because it was not the problem. Unless your lights are out, or it broke, the culprit will be these little dispenser switches which get pressed... Read more
The Solenoid and Yoke Assembly is an OEM part for Frigidaire refrigerators. It is used in the ice dispensing system to control the movement of the ice chute, allowing ice to be dispensed from the refrigerator door.
Causes of a bad solenoid and yoke assembly can include electrical issues such as a burnt-out solenoid, wear and tear from regular use, or physical damage due to mishandling or impact.
Symptoms of a bad solenoid and yoke assembly include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Replaced solonoid. Video was very helpful. Parts came in the time frame given when I ordered the part. (1.7 days). Without the video I would have called a repairman. Thanks . Read more
The Ice Door Center is an OEM part for Frigidaire refrigerators. This component is part of the ice dispenser system, managing the release of ice through the dispenser chute. It helps prevent cold air from escaping the freezer, maintaining energy efficiency and preserving the ice supply.
You should replace the ice door center if it becomes damaged or fails to seal properly. Causes of a bad ice door center can include regular wear and tear, damage from repeated use, or build-up of ice and debris obstructing its movement.
Symptoms of a bad ice door center include:
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more
The Drive Blade is an OEM part for Frigidaire refrigerators. This component is crucial for the ice maker, as it helps to crush and dispense ice properly. The drive blade ensures that ice cubes are broken down to the desired size and pushed through the dispenser efficiently.
Over time, the drive blade can wear out or become damaged due to repeated use, ice buildup, or mechanical stress. Replacing a faulty drive blade is necessary to maintain the ice maker's functionality and ensure a continuous supply of ice.
Symptoms of a bad drive blade include:
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more
The Handle Mounting Block is an OEM part for Frigidaire refrigerators. This component anchors the refrigerator door handle assembly while also reinforcing the door structure. Causes of a bad mounting block can include cracks developing from repeated opening/closing stresses, broken fasteners loosening its installation, or residual damage during door replacement or repair attempts. Symptoms of a bad handle mounting block include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
No problem, 1 min to fix Read more
The Light Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding the light bulb in place and providing the electrical connection needed to illuminate the refrigerator's interior. This ensures visibility inside the refrigerator, helping you easily find and access your stored food items.
Causes of a bad light socket can include electrical malfunctions, wear and tear over time, or damage due to bulb replacements or impact.
Symptoms of a bad light socket include:
Went to the Internet, entered the make and model number, read possible causes, viewed videos on fixes and determined it was probably the socket. Viewed the schematic to determine the correct part number. Ordered a new socket. Received it within three days and in less than 5 minutes replaced the light socket. Problem solved and the light now works. Appreciated the videos, ease in ordering and quick delivery. Read more
The Lower Crisper Pan Cover is an OEM replacement part for Frigidaire refrigerators. It provides a protective barrier that covers the lower crisper storage pan.
Symptoms of a bad crisper pan cover include:
Causes of a bad crisper pan cover can be prolonged use leading to wear and tear of the plastic over time. Accidental damage from cleaning chemicals or physical impact could also degrade its protective function.
Note: This cover does not include glass. Some models did not use the glass but if preferred, you can order part# 240350614.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Gotta love the inter-webs and youtube.com I did a couple of searches and some troubleshooting. Everything pointed to the damper assembly and thermo so I ordered them as well as the new versions of the flimsy plastic drawer shelves, while I was working out of state during COVID. I had the parts waiting for me at the house. Rolled in Sunday, 22 minutes later, damper and thermo installed. The fridge is cooling. Today is Tuesday and everything is back down to temp. knuckle bump. Read more
The Auger Motor is an OEM part for Frigidaire refrigerators. It is responsible for driving the auger, which dispenses ice from the ice bucket out of the dispenser chute.
Causes of a bad auger motor can include electrical issues such as a burned-out motor, wear and tear over time, or damage from a power surge or short circuit.
Symptoms of a bad auger motor include:
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you... Read more
This Glass Shelf Inset is an OEM replacement part for Frigidaire refrigerators. Crafted from durable transparent glass, this shelf creates an enclosed area optimized for storing fruits and vegetables in the upper fridge compartment. Causes of a damaged glass shelf insert can include chips or cracks developing from impact or excessive weight loads over time. Symptoms of an inadequate upper crisper pan include:
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, and Kelvinator.
It was easy to replace it. Thanks for your quick delivery! Read more
Specs: 10-16 X 0.500
The Dairy Door is an OEM replacement part for Frigidaire side-by-side refrigerators. As the access point to the dedicated dairy compartment, the door is designed with precision seals to maintain optimal humidity levels inside. This helps keep dairy and other perishable items fresh longer.
Causes of a bad dairy door can include worn or damaged seals, dents or impacts warping the door frame, or issues with the electronic components that control humidity levels.
Symptoms of a bad dairy door include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore side-by-side models.
Ordered the part, it arrived the next day! Read more
The Adjustable Hinge Kit is an OEM part for Frigidaire refrigerators. This kit includes the components necessary to adjust and secure the refrigerator door hinges, ensuring the door opens and closes smoothly and maintains a proper seal.
Causes of a bad hinge kit can include wear and tear from regular use, physical impact, or loosening of the hinges over time. Misaligned doors can lead to energy inefficiency and temperature fluctuations inside the refrigerator.
Symptoms of a bad adjustable hinge kit include:
Ordered the replacement parts and had them the next day! Very nice. Read more
The Water Tube is an OEM part for Frigidaire refrigerators. It is responsible for transporting water from the supply line to various components such as the ice maker and water dispenser. Ensuring a steady and reliable flow of water, this tube is essential for the proper functioning of these features.
Causes of a bad water tube can include cracks or splits due to temperature fluctuations, clogging from mineral deposits, or damage from bending and kinking.
Symptoms of a bad water tube include:
Changed the Frigidaire Icemaker Fill Tube Part # 241796405 (AP5671747) about a week ago and so far the Frigidaire Refrigerator seems to work fine. Did not use other ordered parts. Recently ice formed around internal evaporator fan and it started making loud noise when then fan and compressor, etc were running. A long winded history noted below if interested: I have been fighting with this Frigidaire Refrigerator for about 3 to 4 years, started out with the evaporator fan making noise when ice... Read more
The Freezer Basket Hanger is an OEM part for Frigidaire refrigerators. This component supports the freezer basket, ensuring it stays securely in place and slides in and out smoothly. The hanger is crucial for organizing and maximizing the storage space in the freezer compartment.
Causes of a bad hanger can include repeated use leading to wear and tear, exposure to heavy loads, or accidental breakage. A faulty hanger can lead to instability and difficulty accessing the freezer basket.
Symptoms of a bad freezer basket hanger include:
Order the parts...!!! Read more
The Compressor Start Relay is an OEM part for Frigidaire refrigerators. This essential component is responsible for initiating the compressor's start-up process by supplying power to the compressor motor. It helps kickstart the compressor, allowing it to begin the cooling cycle.
A faulty start relay or overload can occur due to wear and tear over time, electrical issues, or component failure.
Signs of a bad start relay may include:
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
First I have an LG French Door with a bottom freezer. It quit cooling. I went on line and watched some very informative You Tube videos. I trouble shot according to these videos. In these videos it shows that if there is a click coming off the compressor it has too meanings, the compressor is froze or the start relay is bad. I ohmed the compressor and had no open wires in the compressor. I then shook the relay and it was making noise. The videos stated that is there is a noise in the relay... Read more
The Freezer Basket Hanger is an OEM part for Frigidaire freezers. This component is designed to support the freezer basket, ensuring it stays securely in place, allowing for organized storage and easy access to frozen items.
You should replace the freezer basket hanger if it becomes damaged or fails to hold the basket properly. Causes of a bad freezer basket hanger can include regular wear and tear from frequent use, accidental impacts, or exposure to heavy loads that exceed its design specifications.