405Pnbm4h469 Parts

This inner oven door glass restores the clear viewing window and helps contain heat inside the oven for even cooking. It replaces damaged or cracked inner glass so you can safely monitor food without opening the door. What it does:

• Forms the inner-facing glass layer in the oven door, keeping heat inside and protecting the oven cavity
• Allows safe, clear viewing of food while cooking without opening the door
• Replaces cracked, chipped, or clouded inner glass that can compromise visibility or safety
• Helps maintain the oven door's insulating integrity and consistent cooking temperatures

• One oven door inner glass panel as shown

• High-level: This part installs into the oven door assembly; door disassembly is typically required
• Safety-first: Disconnect power to the appliance before beginning work and allow the oven to cool completely
• Handle glass carefully to avoid breakage and wear cut-resistant gloves and eye protection

This replacement door bin is a molded shelf that mounts to the inside of a refrigerator door to hold bottles, jars and other refrigerated items for easy access and organization. It restores lost storage and helps keep door contents secure. What it does:

• Provides a stable shelf for bottles, condiments and small containers on the fridge door
• Replaces cracked, broken or missing door storage that lets items fall or shift
• Restores proper spacing so door seals and interior organization work as intended
• Fits into existing door bin rails or snap-mount locations to lock in place

• Remove all items from the door and lift out the damaged bin before installing the replacement
• Align the bin with the door rail or mounting studs and press or slide it into the slots until it snaps or seats fully
• No special tools usually required; unplug the appliance before working near electrical components
• Inspect door rails and mounting points for damage and replace if worn to ensure a secure fit

This grille clip is a small plastic retainer that secures a refrigerator grille or trim piece to the cabinet, keeping the front panels aligned and preventing rattles or gaps for a tidy appearance. What it does:

• Secures the lower/front grille or trim to the appliance cabinet to hold it in place
• Prevents grille movement, rattling, or sagging that can occur with worn clips
• Helps maintain a tight fit between trim and cabinet for a finished look
• Simple replacement part when existing clip is cracked, broken, or missing

• One grille clip

• Typically snaps into place; inspect mating slot and clip orientation before installing
• Replace any damaged adjacent clips for even support and fit
• Work carefully to avoid damaging the grille or surrounding trim

This replacement refrigeration tube routes water between the dispenser/valve and internal components to restore reliable water flow and drainage. It's a simple, low-cost part that helps stop leaks and restore proper water delivery. What it does

• Channels water from the inlet valve to internal lines or dispenser components
• Replaces cracked, kinked, or clogged tubing that can cause leaks or reduced flow
• Helps stop visible drips under or inside the refrigerator when the original tube fails
• Works as a direct-fit service part when the OEM tube is damaged

• One replacement tube as shown

• Disconnect power and shut off the water supply before beginning any work
• Inspect fittings and clamps; replace any damaged fasteners to prevent leaks
• Route the tube following original path; avoid sharp bends and pinch points

This shelf channel mounting bracket secures the shelf channel to the appliance cabinet so shelves stay level and stable. It replaces a broken or worn mount to restore proper shelf alignment and support. What it does

• Secures the shelf channel to the cabinet frame so shelves sit flush and don't tilt.
• Prevents shelf movement or sagging caused by a loose or cracked mount.
• Helps maintain safe storage by keeping items from sliding off tilted shelves.
• Fits where the original channel mount has cracked, worn, or snapped.

• Designed for simple replacement—remove the shelf and channel to access the mounting bracket.
• Use appropriate hand tools; avoid over-tightening fasteners which can crack plastic components.
• Disconnect power and remove stored items from the shelf area before beginning work.
• If mounting locations are damaged, assess surrounding supports; replace any additional broken hardware.

The Dispenser Drip Tray is an OEM part for Frigidaire refrigerators. It is located under the water and ice dispenser to catch any drips or spills that occur during use.

A bad dispenser drip tray can be caused by wear and tear, damage, or improper cleaning. When the drip tray becomes faulty, it can result in issues such as water or liquid pooling on the dispenser area or leaking onto the floor.

Symptoms of a bad dispenser drip tray include:

• Water or liquid pooling on the dispenser area
• Leaks or drips from the dispenser onto the floor
• Difficulty in removing or cleaning the tray due to damage

Replace your faulty dispenser drip tray with this genuine OEM Frigidaire part to restore your dispenser area. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This light assembly replaces the refrigerator interior lamp housing to restore interior illumination and safe bulb mounting. It provides a secure lens and socket assembly so the interior light functions correctly and stays protected. What it does:

• Houses and secures the interior lamp socket and lens for the refrigerator compartment
• Protects the bulb from contact with stored items and helps diffuse light for better visibility
• Restores proper lamp alignment and electrical connection when the old housing is cracked or broken
• Helps prevent loose bulbs and reduces risk of accidental bulb damage

• Disconnect power to the appliance before servicing to avoid electrical shock
• Use appropriate screwdriver or trim tool to remove the old housing; handle the lens carefully to avoid scratching or breaking
• Wear gloves and eye protection when handling bulbs or broken parts

This mullion assembly is the vertical door trim that covers the gap between refrigerator doors and provides a finished appearance while helping maintain a tighter seal. Replacing a cracked or warped mullion restores the look and reduces drafts. What it does

• Covers the vertical gap between doors and provides a finished trim piece.
• Helps maintain an improved door seal and reduces cold-air leakage around the door edge.
• Prevents visible damage or gaps that can allow moisture, frost, or odors into the cabinet.
• Restores proper door alignment appearance when the original mullion is dented, cracked, or warped.

• One mullion assembly.

• Disconnect power to the appliance before removing door panels or working near electrical components.
• Remove any door bins/trim as needed, then unfasten mounting screws or clips holding the mullion and lift out; reverse to install.
• Use care to avoid scratching door surfaces; gently align and seat clips/screws so the trim sits flush.

This replacement cover protects the refrigerator control panel and internal components while restoring a finished look. It keeps switches and wiring shielded from spills, dust and accidental contact for safe, reliable operation. What it does

• Covers and protects control panel area and related components
• Helps prevent moisture, food debris and accidental contact with switches or wiring
• Restores finished appearance when original cover is cracked, broken or missing
• Compatible with factory mounting points for a secure fit

• One replacement cover

• Disconnect power to the appliance before replacing any parts
• Remove any retaining screws or clips and gently lift old cover away from mounting points
• Align new cover with mounting tabs and secure with the original fasteners
• Inspect adjacent components for damage and replace as needed

This replacement tube routes water inside the refrigerator to the ice maker or dispenser, restoring reliable water flow and helping prevent leaks. It's a direct-fit plumbing tube used where the factory line is damaged or worn. What it does

• Carries water from the internal water line to the ice maker or dispenser
• Helps stop leaks caused by cracked, kinked, or corroded tubing
• Restores normal filling when the ice maker or dispenser is not getting water
• Works as the OEM replacement part specified for the fridge's internal water routing

• Disconnect power and shut off the household water supply before starting.
• Inspect and clean connection fittings; replace clamps or seals if damaged.
• Use proper tubing cutters and avoid sharp bends or kinks when routing the tube.

This replacement screw secures select refrigerator door handles to the door. A worn or missing screw can leave the handle loose or detached, making the door difficult to open and potentially stressing other components.

• Holds the door handle firmly to the door
• Helps restore proper door operation and safe grip
• Designed to fit designated mounting points for compatible models

• Unplug the refrigerator before beginning work
• Open the door to access the handle mounting points
• Use the correct screwdriver/Allen tool to avoid stripping the head
• Start threads by hand and tighten snugly—do not overtighten

A single replacement mounting screw used to secure trim, panels, or components on compatible Frigidaire appliances. Restores a lost or stripped fastener so panels and parts sit firmly and safely. What it does

• Secures trim pieces, control panels, brackets, or small appliance components
• Replaces missing or damaged screws that cause loose or rattling parts
• Helps restore proper alignment so doors and panels close and seal correctly
• Useful when reassembling after maintenance or part replacement

• Inspect matching hole and threads; replace with like-size screw to avoid damage
• Use correct screwdriver or driver bit to prevent stripping the head
• Do not overtighten; snug until secure
• Disconnect power to the appliance before accessing internal panels or components

This condenser tube spacer positions and secures the refrigerator's condenser tubing to maintain proper tube spacing and airflow. Replacing a worn or broken spacer helps reduce vibration, rattling, and rubbing that can damage tubing over time. What it does:

• Holds condenser tubing in the correct position to preserve airflow and cooling efficiency
• Cushions tubing to limit vibration and reduce rattling noises
• Prevents tubing from rubbing against the cabinet or other components, lowering wear risk
• Helps reduce the chance of tubing fatigue that can lead to damage

• Disconnect power to the appliance before accessing rear panels or condenser components.
• Handle condenser tubing gently; avoid kinking, bending, or putting stress on lines during installation.
• Installation may require removing the back or lower access panel to reach the condenser assembly.

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

This factory screw secures components in your appliance, restoring a tight, rattle-free fit. Replace missing or damaged hardware to keep panels, brackets, and trim properly fastened and aligned for safe, reliable operation.

• Secures panels, brackets, trim, or internal components to the chassis
• Replaces lost, rusty, stripped, or cross-threaded screws
• Helps eliminate looseness, gaps, and vibration/rattling
• Common signs: loose/misaligned panels or trim, rattling noises, missing or rounded screw heads

• Disconnect power (and shut off gas if applicable); allow the unit to cool completely
• Match to the original location and replace one at a time to maintain alignment
• Hand-start to prevent cross-threading; tighten snugly—do not overtighten
• Use light torque when threading into plastic or thin sheet metal