Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Frost buildup on freezer wall? Defrost thermostat monitors evaporator temperature to prevent ice buildup. DIYers report 15-minute installation fixes issue.
My Frigidaire side by side refrigerator/freezer suffered a catastrophic failure. The symptoms were as follows: 1) Frig not cold 2) No Ice being made in the freezer section 3) Items at the back of the freezer were frozen but items on the door shelves would not freeze. The back of the freezer was cold but the closer you got to the door the warmer it got. After removing everything from the unit I saw that there was substantial ice buildup on back of the freeze, specifically around the vents,... Read more
Freezer not cooling below 32°F or water leaking under freezer? The drier filter removes moisture from the refrigerant system. Soldering required.
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now! Read more
Range hood fan stopped working or runs weak? This motor assembly restores proper ventilation. Most DIYers complete installation in 5-20 minutes.
The fan in our 12-year old range hood (Kenmore) stopped working. After removing it and cleaning up the exposed parts and connections, concluded that the motor had simply died. AppliancePartsPro made finding the replacement part very simple. I double-checked the part number on Sears website (they also offered a replacement part, but for a few dollars more). The new fan/motor arrived in just a few days and it took less than 5 minutes to install it. Simple easy project! Read more
Protects the range hood bulb from grease and heat. Replace when cracked, yellowed, or brittle from heat exposure. Snaps on easily. Confirm fit by model.
Ordered Light Lens cover through AppliancePartsPros.com. Fits perfect. Solved my problem. They always seem to have the parts I need. Read more
Decorative insert that press-fits into the handle assembly to conceal mounting screws and fasteners. Replace a cracked, broken, or missing insert.
I determined that it was a problem that occurred during the defrost cycle by resetting the GFCI outlet and forwarding the defrost timer until the defroster came on. Once the defrosting began, the GFCI outlet would reliably trip. I took apart the shielding inside of the freezer and tested the defrosting without the heating element or the thermostat connected. Since that looked good, I tested for proper functionality of the thermostat by removing it, placing it in a working freezer, and checking... Read more
Refrigerator won't cool or freezer stopped working? A failed start relay prevents the compressor from running. Easy 5-10 minute DIY fix restores cooling.
First checked the power then took off the compresser connections cover looked for burnt wires or loose or disconnected wires they were none of those I then removed the wires from the starter an overload protector removed them checked both for contunuaty overload protector no contunuaty then I checked the 3 poles on the comp. for contunuaty they were ok then I checked each pole to ground on the com. to final check that the comp. was still good Read more
Secures the door gasket to your freezer lid or door panel. Replace when broken or missing to maintain proper seal. Verify fit with your model number.
It was relatively easy, we took out the broken lid with the gasket then remove the clips, all of them were ok and we could use them again. Then we proceed to put the new lid with the gasket and use clips to fasten the lid. Read more
Replacement screw that secures brackets, shelves, trim, panels, and covers inside your appliance. Install when the original is missing, stripped, or corroded.
Replaced the handle. Read more
Fix a range hood light or fan that won't turn on or off with this rocker switch. Restores manual control when switches stick or fail to respond.
I ordered the switches from AppliancePartsPros.com and replaced both the light switch and the fan switch. The difficult part of the project is removing the old switches. The collapsible holders on the switches require pressure and maneuvering through the small opening to remove the switches. Problem with original design. The easiest and most satisfying part of the project was the ordering and delivery of the switches. I ordered one day and they were delivered the next day. Both the order... Read more
Replace your washer's cracked or broken lid hinge. This right-hand side hinge secures the washer lid and allows smooth opening and closing operation.
With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved. Read more
Range hood won't turn on or respond to controls? This switch assembly restores power and setting adjustments, fixing unresponsive buttons and panels.
Weak airflow or excessive noise from your range hood? This blower wheel restores proper ventilation by replacing worn or damaged fan blades in the motor.
Threaded insert nut creates secure anchor point in thin metal or plastic panels. Replace worn, stripped, or missing insert nuts to properly mount covers.
Secures and connects light bulbs in appliances. Replace when lighting fails or socket is damaged. Verify fit by checking your model number compatibility.
I fixed it myself. I'm a 62 yr old lady that loves doing my own repairs. It was simple, and works great! Read more
Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.
Metal sheet-metal screw secures panels, brackets, and internal components. Replace when missing, stripped, or damaged to restore proper fit.
My washer and dryer was stacked and I needed the right parts to put the tops and "feet" back on them. Read more