Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
We scoured the web and there are few references to this so I want to add it in case it helps. Replacing hinges solved the popping opening issue. We could not solve our dishwasher door issue after a number of other tries: Latch, Catch, Ropes that attach to the springs that pull the door closed. I tend to believe the solve could be different b/c all these things work together. But for us, we were skeptical that the hinge swap would work and we were very pleasantly surprised. Read more
Door won't latch or stay closed? This dishwasher door latch actuator secures your door during wash cycles. DIY repair in 15-30 minutes with video guide.
Our 7 y/o dishwasher wouldn't close and therefore we couldn't get it to run. I called several service places who charged $75-$90 diagnostic plus parts & labor, and they were not able to get here for at least a week. I knew it was going to run at least $200. Kitchenaid wanted > $400 for a 1 YEAR WARRANTY, but it would cover this service call and any more throughout the next year. Seemed a little steep given the unit is already 7 y/o. I watched a couple videos on this site and YouTube and... Read more
Screw secures appliance panels and access covers. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattles or gaps.
After several attempts at Local Hardware stores and Lowe's and Home Depot to find them I called AppiancePartsPros.com. I gave them the model number and what I was looking for and customer service directed me to the part on the Web site. They were extremely helpful and it was very fast and I got the parts the next day. Read more
Fix a dishwasher that won't spray water or makes clicking noises. This circulation pump motor drives water flow for cleaning. Moderate DIY repair.
Replaced pump, found impeller on pump failed. Unfortunately had to replace entire pump, could not just buy impeller. Read more
Color: Black. Screw for lower toe panel. For Biscuit screw use 3400865, for white screw use WP3400836.
I had no hope of separating the panel from the frame without damaging the frame since the two parts were rusted pretty badly and the screws holding the panel to the frame were completely beyond salvage. So I had to replace both the panel and the frame. I ended up removing the electrical/electronic connections, removing the panel/frame from the hinge and then replacing it with the new parts. Took about 90 minutes but the hardest part was removing other items from the rusting frame without... Read more
If your detergent dispenser is loose or falling off, this bracket secures it to the door panel. Moderate DIY repair requiring door disassembly.
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself! Read more
The Screw Hole Cap is an OEM part for Whirlpool dishwashers. It covers the screw holes, providing a clean and finished appearance while preventing moisture and debris from entering the screw openings. This helps maintain the dishwasher's aesthetic and ensures that screws remain protected from rust and corrosion.
Causes of a bad screw hole cap can include regular wear and tear, accidental impacts, or misplacement during maintenance.
Symptoms of a bad screw hole cap include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I ordered the part and it was delivered the next day! Amazing experience! Read more
Replacement hinge brace for dishwasher doors. Anchors the door hinge assembly to the tub. Install if original is cracked, warped, or missing.
Received your parts very fast & installed them with some youtube video assistance. The leak is gone. The dishwasher is once again operational. Beats a $150+ service call where the repairman breaks more than he can fix!!! Read more
This is a temperature sensor that monitors the internal temperature of the refrigerator compartment and sends readings to the main control board. The control board uses this data to regulate the compressor and cooling cycles. Replace this sensor if the refrigerator is too warm, too cold, runs continuously, or displays incorrect temperature readings.
I removed the defrost sensor assembly, installed a new one, it worked. Because of a shipping problem with FEDEX, Appliancepartspros resent the parts not once but twice. Needless to say, they are my go-to source for parts from now on. Read more
Wheel mount assembly for dishwasher upper rack. Attaches to rack and glides along side rails. Replace when cracked, broken, or worn for smooth rolling.
Replaced both wheels after watching your video. easy repair Read more
Door won't latch or close properly? The door latch strike secures your dishwasher door for a watertight seal. Simple 5-minute snap-in repair with video.
I Google the symptoms, went to appliancepartspros.com and ordered the latch assembly parts. While ordering the parts I watched their repair video. Once I received the parts( quick shipping) I installed them in about 30 minutes. Eureka!! Repair successful. Thanks appliance parts pros! Read more
Dishes tipping or rattling in your dishwasher rack? This tine positioner clip holds rack tines in place to keep plates stable and properly spaced during wash cycles.
Replaced panel Read more
This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles. Read more
This is a vent assembly with an integrated fan motor that releases steam and moisture from the dishwasher during the drying cycle. It is typically located on the inner door panel and helps prevent excess condensation from building up inside the unit. Replace this assembly if your dishwasher is not drying dishes properly, you notice excessive moisture or water pooling after a cycle, or the vent fan is no longer running.
Replaced the vent assembly on KitchenAid dishwasher. Straight forward job by removing front panel. Ordered the air vent gasket in addition to the vent assembly, but didn't need the ngasket since the vent assembly included one. Read more
Structural bracket that secures the rear panel to the washer chassis. Replace if cracked, broken, or missing to restore proper alignment and cabinet stability.
In the end, with a new coupler. But I relearned old lessons the hard way. The washer is in a rental unit and the tenant complained of no spin. My first intuition was that the coupler failed again because I bought a cheaper one elsewhere a couple of years ago and not the brand name available here at AppliancePartsPros. But we’ll come back to that. Lesson #1: Verify the symptoms firsthand. I dug in right away, popped out the motor and the coupler appeared okay. When I spun it by hand, it turned... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.