Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Refrigerator making loud noises or not cooling? A worn evaporator fan blade often causes these issues. DIY-friendly repair typically takes 30 minutes.
1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was. 2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived... Read more
Refrigerator front shelf trim snaps onto the front edge of glass shelves for a finished look. Replace when cracked, broken, or missing to restore stability.
Replace them. Out of two shelf guards 1 was broken Read more
Plastic trim piece that clips onto the back edge of refrigerator shelves. Replace when cracked, broken, or missing to restore a finished look.
Ordered part from your website. Fit perfectly Read more
Dryer won't heat or stops heating after 10-15 minutes? Gas valve coils control burner ignition. Simple 5-10 minute repair with video guide included.
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits. I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have. I looked up my dryer, decided what was probably the problem,... Read more
Replace your cracked, broken, or damaged refrigerator meat pan. This drawer installs in the fresh food section to store meats and perishables separately.
I removed the meat drawer and shelving unit. I unscrewed the Philips head screws on either side of the shelf brackets. I cleaned the old surfaces and fitted the new plastic hangers in place. I screwed the new hangers in place with the screws I had from the old ones. It was very easy, except the holes in the plastic hanger are not quiet big enough for the screws. I had to push very hard with the screwdriver, and started to strip the head of the screw as well at the screwdriver itself. I did... Read more
Dryer not heating or clothes staying damp? This heating element restores proper drying. Moderate DIY repair—requires disassembly and multimeter testing.
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible. Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem. Next step was to... Read more
Dryer won't start or stops mid-cycle? A broken door catch prevents secure closure, triggering safety shutoffs. Simple snap-in replacement, 1 minute.
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts. Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum... Read more
Shock absorber kit for front-load washers. Includes 2 absorbers, pins, and hardware. Replace when broken, cracked, or worn to restore stability.
I watched the video posted by Jerrod Sessler on yellow van handyman.com. Then I had to unstack the dryer from the washer, remove all covers, disconnect all hose connections, shock mounts and springs and remove the tub assembly. Then I disassembled the tub assembly and remove seal and both bearings from the rear half. At this point I cleaned everything. I installed new bearings and seal, installed the basket and assembled both tub halves using a new gasket and silicone, and reinstalled the... Read more
Refrigerator not cooling or freezing? A faulty temperature control thermostat causes inadequate cooling. DIY repair in 5-10 minutes with basic tools.
This was a 2000 model so rather than just replace the defrost timer which was visibly burnt on the terminals, we just did everything. The cold control, defrost timer, thermostat, defrost heater and the compressor capacitor were all replaced. I had the same issue on my older unit and tore it apart replacing one item at a time over a three month period so on an older one i suggest do it all while it is apart. Read more
Traps lint and debris during drying to prevent vent clogs and maintain efficiency. Replace when torn, rusted, or bent. Verify fit with your model.
Ordered a new one from the website, matched the model and the picture Read more
Excessive ice buildup in freezer or warm fridge? This defrost timer controls the defrost cycle. DIY-friendly repair with basic tools in under 30 minutes.
I removed to the cover to the coil, defrosted coil with a heat gun and checked the heater strip resistance. I set timer to defrost by hand to make sure everything was working. There was damage to the temp control sensor. Both parts were on your web site at a good price, ordering was easy. The parts were in the mail two days later. A screwdriver and nut driver were the only other tools other than a multi meter. Parts installed in five min. I had the option of talking with a pro !!! Read more
Inner door glass panel for range and wall oven doors. Replace if cracked, shattered, or slipped out of position. Installs between outer glass and oven cavity.
I ordered this glass and used a youtube video to replace the shattered glass step-by-step. I was a bit wary of doing this work myself, but it proved to be a snap. Within an hour of finding this package on my front porch, I had the oven as good as new. Read more
Secures refrigerator and freezer door handles to the door. Replaces lost, stripped, or missing screws during handle installation or replacement.
I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did! Read more
Creates an airtight seal to prevent warm air from entering your freezer. Replace if you notice frost buildup, ice formation, or detachment. Verify fit by model.
Ordered the part via the model number. Removed the old gasket (just pulls out of the indentations and cleaned the channel for the gasket. Pushed into the channel and no more frost forming in the freezer. Read more
If your burner isn't heating evenly or won't heat at all, this 6-inch coil element typically solves the problem. Simple plug-in replacement. Video guide.
Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed. Read more
Mounting screw for refrigerator door handles. Secures handle to door or mounting block. Replace if stripped, missing, or broken during handle removal.
The bar retainers just snapped in and the door handle can be replaced with three screws. Took about 5 minutes total. Read more