We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Heating Element is an OEM replacement part for Bosch electric wall ovens and ranges. It is responsible for providing precise heat control to oven cavities and cooking elements.
Symptoms of an inadequate heating element include:
Causes can be normal wear and tear after extended use. Exposure to splatters or residue over time may also reduce heating performance.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore wall ovens.
Based on the sound of arcing, one of the elements failed. The upper one tested fine; too bad, as that's the easy one to access. The lower element on my Bosch induction range is accessible from the back, but only after you pry and bend a vertical piece of sheet metal down to a 30-40 degree angle. I assume this saves Bosch a few cents on each unit during production. Before bending that panel down, I remove all vertical obstructions: 240V power cable, the wires to the warming drawer element... Read more
Fix oven overheating or temperature regulation issues with this temperature sensor. Common repair for wall ovens and ranges that won't heat accurately.
Some internet searching on the problem followed by a chat session with AppliancePartsPros and a decision to purchase both control panel board and probe (didn't want to remove the unit twice). The replacements arrived within 36 hours and my daughter (50 years) helped remove the oven plus replace both parts - the panel was above the oven chambers and easy to replace. And the probe was okay too. I'm in my mid 70s. The panel required the nylon spacers to be re-used and these took half an hour to... Read more
Fix a blank, flickering, or unresponsive oven display. This electronic control module restores touchpad function and temperature settings. DIY-friendly repair.
The digital display/control touch screen stopped lighting up. I discovered it still worked (very faint beeps when pressing buttons, but literally flying in the dark (screen). This was the second screen that went black in a little over two years time. Did a google search and placed the replacement order with AppliancePartsPros.com. It arrived a few days later. It took me longer to get the tools together than to swap out the display panel. An easy Google search will get you an easy todo video... Read more
The Heating Element Oven is an OEM part compatible with Frigidaire and Electrolux wall ovens and ranges. It generates targeted heat through accurate temperature coils to provide consistent, reliable baking and broiling. The oven element ensures warm, golden finishes for any recipe.
Causes of a damaged element include mineral buildup impeding heat transfer. Physical bending or cracking of fragile coils can occur from accidental impact over years of use.
Symptoms of a failed element are:
Replacing with this genuine OEM part restores optimal performance. Compatible with Kenmore, Gibson, and some Admiral wall ovens.
Oven won't heat after self-clean cycle? A failed temperature limiter (high-limit thermostat) cuts power to protect against overheating. Direct fix.
This meat probe sensor is a temperature-sensing device that inserts into food while it cooks in the oven, allowing the oven to monitor the internal temperature and automatically stop cooking when the target temperature is reached. It connects to a jack inside the oven cavity via a heat-resistant cable. Replace this probe if your oven no longer reads the food temperature accurately, displays a probe error code, or if the cable or tip is visibly damaged.
Replaced Read more
Uneven baking or slow heating in convection mode? A failed convection fan motor stops hot air circulation. Moderate DIY repair restores even cooking.
Oven not heating evenly or baking properly? This heating element restores consistent heat distribution. DIY-friendly repair with basic tools.
Bought a new one from Appliance Parts Pros, which came quickly and I changed it out. Works great now. Read more
Wall oven won't start or controls acting erratic? The electronic control board directs power and timing to all components. Moderate DIY repair.
Fix a broken or loose oven control knob that won't turn or adjust temperature properly. Direct replacement for Bosch wall oven temperature control knobs.
This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.
A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging.
Symptoms of a defective Terminal Box may include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Removed and replace Read more
Electronic user-interface board that lights the display and reads button inputs. Replace when display goes dark, buttons stop responding, or error codes appear. Verify fit with your model number before ordering.
Oven overheats or shows E115 error? The temperature limiter (safety thermostat) may have failed. Moderate difficulty repair requiring careful disassembly.
Forced door open, replaced electric lock assembly and high limit temp switch . Large amount of disassembly required and patience. All working well need to check convection fan next. Read more
This is a cooling fan assembly that includes the motor and fan blade, designed to circulate air and cool internal oven components during and after use. It helps protect electronic controls and surrounding cabinetry from excessive heat. Replace this assembly if the oven overheats, nearby surfaces become unusually hot, or you no longer hear the cooling fan running after a cooking cycle.
Replaced cooling fan Read more
Fix a wall oven feature that stopped responding or works intermittently. This switch restores reliable on/off control by replacing worn contacts.
Fixes oven overheating, won't heat to set temperature, or unresponsive controls. Main control board manages cycle timing and power. Moderate DIY repair.