Cmt Thermatronic 2 Model Parts

After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get... Read more

I'm a 56 year old divorced woman. I started doing these kinds of repairs to save some money and honestly, to see if I could. So yes, if I can do it, it's not that tough to do. My microwave is built in above the stove - getting it down and back up was the hardest part of the job. An extra pair of strong hands really helps-for anybody, not just a 56 year old woman. The actual repair was pretty easy. Most likely problem was pretty obvious after a little research. Easy to take off cover, get... Read more

It is difficult (if not impossible) to remove the electronic switches from the hard plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed. Read more

Very easy fix. Unplugged microwave, then lowered bottom panel, removed the two leads to the turntable motor, removed two screws attached to motor, removed old motor, put new spacer on motor stem, installed motor with same two screws, reattached the two wires, reattached panel ( after cleaning all the grease that built up over the last 6 years), plugged microwave in and good as new! Took me twenty minutes. Note: the two screws holding the motor were not Phillips like those holding the panel. So... Read more

Replacing a magnetron in my particular 9-year-old microwave (a microwave/hood combination) was not a simple “plug & play” operation. That is why I am placing this in the slightly difficult area. First, it takes 2 people to remove the microwave from the top of the stove. Next the main outer panel need to be removed. After that, 2 sheet metal panels need to be removed in order to expose the high voltage components for testing. Always discharge the high voltage capacitor first before doing... Read more

It is difficult (if not impossible) to remove the electronic switches from the hard plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed. Read more

• No heat

Replacing a magnetron in my particular 9-year-old microwave (a microwave/hood combination) was not a simple “plug & play” operation. That is why I am placing this in the slightly difficult area. First, it takes 2 people to remove the microwave from the top of the stove. Next the main outer panel need to be removed. After that, 2 sheet metal panels need to be removed in order to expose the high voltage components for testing. Always discharge the high voltage capacitor first before doing... Read more

• Won't start

First, it was going to cost $95 for an appliance guy just to look at it! I figured there would be an upcharge on the parts + labor on top of the $95, so I took a chance & decided my husband & I could fix it cheaper; we were right, but it was a 3 week process (luckily, we have another microwave in the basement we were able to use in the meantime). I googled the microwave model #, then price checked the same item I thought we needed; printed off the diagrams of the various microwave "systems" &... Read more

We bought both bottom elements for each oven. They installed and now work PERFECTLY! Thank you! Read more

I took the model number of the oven and typed that in followed by replacement backing element.there was a photo of the element that matched the original. They provided an online tutorial as to how to install it. It was very easy because the electrical contacts at the ends of the new baking element slid right into the electrical contacts inside the oven cavity. The only thing that you had to be careful about was loosing the electrical contacts deep inside the oven. But I didn't see it as much of... Read more

Replaced lower door interlock bracket, cam(which was redesigned), spring(I believe this was the problem) and switch. When the door opens the spring moves the cam which releases the switch"on" Button which turns on the interior light when you close the door, the latch which protrudes out from door pushes into the cam which rotates to turn off the light switch and enables operation of the microwave. Old design cam would push past the light switch and the weakened spring would not push it back... Read more

• Won't start

In addition to blown fuse; the fuse holder was melted at one end. Checked the unit to see if any part or wiring that would cause the issue, none was visible. Referred to wiring diagram included inside to identify components, including interlocks. All seemed functional. Bought replacement 20A fuse. Fuse holder no longer available so bought similar unit with 25A rating - little retrofitting. Put unit back together, and it's working so far. Wife is happy. Read more

We bought both bottom elements for each oven. They installed and now work PERFECTLY! Thank you! Read more

I received the parts from parts pro within 3 days and everything fit perfectly nd all went well Thanks Parts Pro Wayne Mazur Joliet Il Read more

Replaced magnatron and wire-vltg. First magnatron I ordered came in had damaged frame and tip I decided to install it any way to see if it worked, unfortunately it didn't. I called appliance parts pros and explained what the problem was, the women was very nice and accommodating she sent one out the very next day. I installed the new one and it worked perfectly. It saved me over $400 to replace this particular microwave. I was very happy with the experience of using appliance parts pros. Read more

Tenants in my rental property broke the turntable support hub then tried to fix it with Scotch Tape (bad idea!). Found your site after a quick part search. Found the item in your catalogue effortlessly, ordered the part and it came in a day or two. Ordered a new stirrer window as well . Microwave unit works just fine. I know where to come the next time I need parts! Read more