Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Temperature Sensor is an OEM replacement part for GE refrigerators, designed to accurately monitor and relay the temperature inside the refrigerator and freezer compartments to the electronic control board. By detecting the slightest changes in internal temperature, the sensor allows the control board to make real-time adjustments to the cooling system, activating the compressor and fans as needed to maintain optimal conditions for food preservation.
Over time, the temperature sensor can fail due to electrical issues, exposure to moisture, or general wear and tear. A malfunctioning sensor can lead to improper temperature regulation, affecting the efficiency of the refrigerator and the freshness of stored food.
Symptoms of a bad Temperature Sensor include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over... Read more
The Water Valve with Guard is an OEM part for GE refrigerators, responsible for controlling the flow of water to the ice maker and water dispenser. This part ensures that your refrigerator dispenses fresh, clean water and ice on demand.
Symptoms of a bad Water Valve with Guard include:
Causes of failure can range from mineral deposits clogging the valve, electrical failures preventing the valve from opening or closing correctly, or physical damage to the valve.
I seared the web and found Appliance Parts Pros site and when I input my GE refrigerator model number I was able to do some diagnostics on their site. It was indicated from my research that the Water Inlet valve most likely was at fault for my problems. I ordered the replacement valve from them and they shipped the same day as the order and it arrived the next day, faster than I had expected. I viewed their video and it was very good at explaining what I had to do to replace the valve on my... Read more
The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.
Features and Benefits:
When to replace your filter:
Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
By visiting your website, viewing the repair instructions and ordering the right parts. Very easy to understand and to do the repair.. Read more
The Fan Motor Grommet is an OEM replacement part for GE refrigerators. This small but essential component serves as a seal and insulator around the area where the fan motor shaft protrudes from the appliance body.
Causes of needing to replace the fan motor grommet can include normal wear and tear over time, exposure to extreme temperatures or moisture, or physical damage due to impact or improper installation.
Symptoms of a faulty or missing grommet include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
It was after 11:00 at night a few nights ago, I couldn't sleep listening to the whining of the fan in the freezer, it was running and making noise sounding like waaoooww, waaaoww. It also sounded like grumbling of a garbage disposal. The refrigerator fan motor was so noisy it was keeping me up all night going on and off running really loud and about to fail. So I was desperate, and called AppliancePartsPros when I couldn't get to sleep near midnight because the fan was so noisy and Bud in... Read more
The Pan Middle Asm is an OEM part for GE refrigerators. It is designed to fit within the refrigerator's interior as a middle drawer or shelf, providing an organized space for storing items such as deli meats, cheeses, and other perishables. This component helps maintain the cleanliness and organization of your refrigerator by offering a dedicated storage area that is easily accessible.
Causes of a bad Pan Middle Asm can include physical damage such as cracks or warping, issues with the sliding mechanism if it does not move smoothly, or the pan becoming brittle and breaking due to low temperatures or aging.
Symptoms of a bad Pan Middle Asm include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Bought a new vegetable drawer. It was an expensive fix but well worth it because now my drawer doesn't fall when I open it. That was a pain especially since the drawer is so huge. Love the fact that it's a big drawer but the drawback is that the drawer gets so heavy that it broke the plastic on the back of the drawer. I noticed that the new drawer was reinforced in that area. So that is very appreciated. My fridge is like new again :) Read more
The Ice Door Assembly is an OEM part for GE refrigerators. It is integral to the ice dispenser system, controlling access to the ice chute. This component ensures the efficient delivery of ice cubes or crushed ice when activated and seals off the chute when not in use to maintain the freezer's temperature and prevent frost buildup.
Symptoms of a bad Ice Door Assembly include:
Causes of a bad Ice Door Assembly can include mechanical wear from frequent use, failure of the spring mechanism or solenoid that operates the door, or damage to the sealing surfaces that leads to air leaks.
My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more
The Door Bin Front is an OEM part for GE refrigerators. This component serves as the front barrier for door bins, helping to keep stored items in place and preventing them from falling out when the door is opened or closed. This front measures approximately 13 inches wide by 3-1/2 inches high.
Common causes of a bad door bin front include cracking due to impact, stress from heavy items, or general wear and tear from frequent use.
Symptoms of a bad door bin front include:
Ordered the part online and when it arrived I followed the online video on how to remove the old auger and install the new auger. I had to review parts of the video several times to make sure I put everything back together correctly. My husband is not mechanically inclined and I take on some of the repairs. It was great not to have to call the repairman to do this as his service call is $95. Thanks for the video and without it I would not have been able to do this so easily. When finished... Read more
The Ice Dispenser Solenoid is an OEM replacement part for GE refrigerators. It is a crucial component that controls the flow of ice from the ice maker to the dispenser chute.
Symptoms of a bad ice dispenser solenoid include:
Causes of a bad solenoid can include electrical malfunctions, physical obstructions preventing proper operation, or simply wear and tear over time.
The Fruit and Vegetable Pan Shelf is an OEM part for GE refrigerators. Designed to provide sturdy support and optimal storage for fruit and vegetable pans, this shelf is an essential component for organizing and accessing your produce with ease. It fits snugly above the fruit and vegetable drawers, maximizing space utilization within the fridge and helping maintain the freshness of fruits and vegetables by ensuring proper air circulation around them.
A damaged or missing fruit and vegetable pan shelf can lead to disorganization and inefficient use of space in your refrigerator.
Symptoms of a bad Fruit and Vegetable Pan Shelf include:
Used the schematic provided to select the parts needing replacement and placed the order. Parts arrived and swapping new for old was simple. For the most part it was a matter of taking out the old and putting in the new. There were a few screws with wheels to replace but that was easy as well. Before purchase I searched several different sites and found all the parts needed. I compared prices of each item as well as shipping cost. Prices for each item were nearly identical between sites... Read more
The Refrigerator Shelf is an OEM part for GE refrigerators. It is designed to provide robust and flexible storage solutions within the refrigerator, allowing for the efficient organization and accessibility of food items. Made from high-quality materials, this shelf is built to withstand the typical wear and tear of everyday refrigerator use while maintaining its structural integrity and appearance.
Symptoms of a bad Refrigerator Shelf include:
Causes of a bad shelf can stem from overloading beyond recommended limits, accidental damage from handling, or material degradation over time due to exposure to cold temperatures and moisture.
Put it in. Read more
The Water Tank Assembly is an OEM part for GE refrigerators, designed to store and chill water before it's dispensed through the refrigerator's water dispenser. This integral component ensures that you have immediate access to cold, fresh water without the need to open the refrigerator, helping to conserve energy and maintain the internal temperature.
Over time, the water tank assembly can experience issues such as leaks, cracks, or the buildup of contaminants, all of which can affect the quality and taste of your water.
Symptoms of a bad Water Tank Assembly include:
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more
The Pan Bottom Assembly is an OEM part for GE refrigerators. This component is the bottom drawer or bin in the refrigerator, typically used for storing fruits and vegetables at optimal humidity levels. It slides into the lower part of the refrigerator, offering convenient storage that helps keep produce fresh longer by maintaining a separate climate from the rest of the refrigerator. It measures approximately 22 inches wide, 15 inches tall, and 19 inches deep.
Symptoms of a failing Pan Bottom Assembly include:
Causes of a bad pan bottom assembly often involve excessive weight being placed inside the drawer, frequent use which can lead to wear and tear, or temperature fluctuations that cause the material to weaken or deform over time.
Ordered new drawer from your company. It fit beautifully. Thanks. Read more
The Refrigerator Union Connector is an OEM replacement part for GE refrigerators. It is responsible for connecting the water supply lines from the kitchen plumbing to the refrigerator, allowing water to flow to the ice maker and water dispenser. The plastic connector assists your water dispenser by joining two 5/16 inch x 5/16 inch plastic water lines. Over time, Union Connectors can crack or break under pressure.
Causes of a bad Union Connector include wear and tear from repeated use, exposure to extreme fluctuations or surges in water pressure, or damage from accidental mishandling.
Symptoms of a bad Refrigerator Union Connector include:
We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as... Read more
The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use. Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation. Symptoms of a bad Run Capacitor include:
We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from... Read more
The GE XWFE Refrigeration Water Filter is an OEM part for GE refrigerators. This advanced water filter is designed to reduce a wide range of contaminants, including chlorine, lead, cysts, and select pharmaceuticals, providing clean and safe drinking water and ice. It seamlessly integrates into the refrigerator's filtration system, ensuring optimal water quality.
You should replace this water filter if it becomes clogged or reaches the end of its lifespan, typically every six months. Common causes of a bad water filter include excessive contaminants, improper installation, or failure to follow the replacement schedule.
Symptoms of a bad water filter include:
Ordered a new one. Read more
The Dairy Door is an OEM part for GE refrigerators. It is designed to fit into the refrigerator door and provide a covered compartment for storing butter, cheese, and other dairy products. This compartment helps to keep these items at a slightly different temperature than the rest of the refrigerator, which can extend their freshness.
Symptoms of a bad Dairy Door include:
Causes of a bad dairy door can include normal wear and tear from frequent opening and closing, accidental damage from loading or unloading items, or material degradation from exposure to the various conditions inside a refrigerator.
Just enter the appliance model and the all the parts are pictured! Really easy! Read more