Jenn-Air Svd48600p Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Oven Temperature Sensor Kit

4.9 (155)

By: Whirlpool

Part Number: 12001656

The Oven Temperature Sensor Kit is an OEM part for Whirlpool ovens. This sensor is essential for monitoring the oven's internal temperature, ensuring that it reaches and maintains the correct temperature for baking and cooking. The sensor is approximately 7 inches long.

Over time, the oven temperature sensor can fail due to repeated heating and cooling cycles, exposure to spills or grease, or electrical issues. When the sensor malfunctions, it can result in inaccurate temperature readings, affecting cooking performance and food quality.

Symptoms of a bad oven temperature sensor include:

The oven not reaching the set temperature
Food cooking unevenly or not fully
The oven overheating or underheating
Error codes related to temperature issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Oven is too hot
Little to no heat when baking
Won't start
Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. Joe D. • New Berlin , WI • March 20, 2019

First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on... Read more

$41.95

Compare At:: $49.92
You Save:: $7.97

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Grease Filter

4.9 (46)

By: Whirlpool

Part Number: WP71002111

The Grease Filter is an OEM part for Whirlpool range hoods. It is designed to capture grease and particulates from the air during cooking, preventing them from accumulating on kitchen surfaces and within the ventilation system. The filter measures approximately. 6-1/4 inches x 15-1/2 inches.

Causes of a bad grease filter can include accumulation of grease and food particles over time, damage from frequent cleaning, or wear and tear from regular use. A clogged or damaged filter can impede the performance of the range hood and reduce air quality in the kitchen.

Symptoms of a bad grease filter include:

Reduced ventilation efficiency
Excessive grease buildup on kitchen surfaces
Unpleasant odors lingering after cooking
Visible damage or clogging in the filter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Burner on my jen air pro range rusted out Frank M. • Providence , RI • November 15, 2014

After many years of excellent service the burner I use most often on the top of my JenAir range rusted through. After trying to remove the burner, which was firmly rusted into place, I decided to replace the cooktop pan, both burners and igniters. It was an easy repair to swap out the new parts for the old, and the only tool necessary was a #2 phillips screw driver. The only difficulty was that although the cooktop pan appears symmetrical, the screw hole pattern on each side is different. I did... Read more

$23.95

Compare At:: $28.26
You Save:: $4.31

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.6 (7)

By: Whirlpool

Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

Loose or wobbly components within the appliance
Panels or parts that are not securely attached
Rattling or unusual noises due to loose parts
Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Element, Bake

5.0 (26)

By: Whirlpool

Part Number: WP71001680

The Bake Element is an OEM part for Whirlpool ranges. This part provides the necessary heat for baking by generating and distributing even heat throughout the oven cavity. It is located at the bottom of the oven and is essential for achieving consistent baking and roasting results.

Causes of a bad bake element can include regular wear and tear, electrical faults, or damage from spills and residues.

Symptoms of a bad bake element include:

The oven not heating up or taking longer to reach the desired temperature
Uneven baking or roasting results
Visible damage or burn marks on the element

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Wouldn't get above 100 degrees Jeffrey W. • Atlanta , GA • November 16, 2014

I diagnosed the problem, found Appliance Parts Pros and watched their video. It was as easy as the video they made said it would be. Overall an amazing experience. I was quoted $250 to have the repairman come do the same thing. My cost was $40. Read more

$79.95

Compare At:: $95.14
You Save:: $15.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Broil Pan Set

5.0 (17)

By: Whirlpool

Part Number: 4396923

The Broil Pan Set is an OEM part for Whirlpool ovens. This set includes a broil pan and an insert, designed to catch drippings and ensure even heat distribution during broiling, allowing for perfectly cooked and crisp results.

Causes of a bad broil pan set can include prolonged exposure to high temperatures, which may lead to warping or distortion of the pan. Additionally, frequent use without proper cleaning can result in rusting, chipping, or buildup of residues that compromise the pan's functionality and safety.

Symptoms of a bad broil pan set include:

Warping or bending of the pan
Presence of rust or corrosion
Surface chipping or flaking
Difficulty in achieving even cooking results

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You There was no problem Harry M. • Olivebranch , MS • March 10, 2015

I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more

$46.95

Compare At:: $55.40
You Save:: $8.45

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Broil Element

4.9 (7)

By: Whirlpool

Part Number: WPW10310260

This broil element is the oven's upper heating element. It delivers intense top heat for broiling and finishing, restoring proper broiler performance when the original element is open, warped, or visibly damaged.

Provides upper radiant heat during broil and top-browning cycles
Typical symptoms: broiler won't heat or glow; food won't brown on top; uneven broiling
Replace if the element is cracked, blistered, pitted, or broken
Restores consistent top heat and broiler function

Includes 1 broil element.

Disconnect power at the breaker before servicing; allow the oven to cool
Remove oven racks; take out mounting screws and gently pull the element forward
Transfer the two wire leads one at a time; support wires so they don't slip back into the cavity; ensure snug connections
Reinstall hardware, restore power, and test the broil cycle

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Control display was not working James T. • Calhoun , GA • February 17, 2015

Ordered a new one. Read more

$104.24

Compare At:: $125.09
You Save:: $20.85

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Light Assembly

4.9 (15)

By: Whirlpool

Part Number: WP74011278

The Oven Light Assembly is an OEM part for Whirlpool ranges. This part lights up the interior of the oven, allowing you to monitor the cooking process without opening the oven door.

Over time, the oven light assembly can fail due to normal wear and tear, exposure to extreme heat, or electrical issues.

Symptoms of a bad oven light assembly include:

The light not turning on when the oven door is opened or when the light switch is activated
Flickering or dim lighting inside the oven
A broken or missing protective cover

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Light bulbs kept blowing went through about six bulbs inabout four weeks F. Leo V. • Hillsborough , NC • October 18, 2015

I ordered the replacement light module and install it. I was able to install the module without removing the walloven from the cabinet. Thank you for quick delivery of the module. Read more

$80.21

Compare At:: $94.65
You Save:: $14.44

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Grate Kit

5.0 (4)

By: Whirlpool

Part Number: 12001481

Note: Kit of 2 black grates.

Do-It-Yourself Stories from Customers like You Stove top is over 15 years old and was considering buying a new complete appliance knobs were terribly worn and one had melted a bit from a hot pan Ben D. • Antioch , IL • November 19, 2017

I found this website and was surprised that I could replace drip pans, grates, and knobs. It was at my door the next day after ordering! It took longer to open the box and unwrap the pieces than it did to put the new pieces on. My stovetop looks brand new and I am very happy! Read more

$155.33

Compare At:: $186.40
You Save:: $31.07

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Door Strike

4.9 (8)

By: Whirlpool

Part Number: WP71002097

This door strike is the catch the latch engages to hold the oven door closed. It restores a firm, aligned close so heat stays in and the appliance can detect a fully shut door for normal operation.

Aligns with the latch to keep the door closed and sealed properly
Provides the catch point required for latch/lock engagement
Wear, bending, or breakage can cause a loose door, heat escaping, or an oven light that won't turn off
Prevents self-clean or other cycles that require a fully closed/locked door from starting

What's included: 1 door strike Install notes:

Disconnect power at the breaker; if gas, shut off the gas supply. Allow the appliance to cool completely
Typically mounts to the door or cabinet frame with screws; transfer and reuse existing hardware
Position and tighten evenly so the latch engages smoothly; minor alignment adjustments may be needed
After installation, verify the door closes fully, seals well, and the light turns off

Do-It-Yourself Stories from Customers like You Old Tracy B. • Lake Butler , FL • March 29, 2015

Everything works great, but my Jenn-Air stove is more than 15 years old and really needed a face lift. To replace it will cost about $3000.00 to replace, to replace missing and old parts around $500.00. Thankfully Appliance Parts Pros had all the parts I needed to make my stove look as good as it works. Read more

$12.95

Compare At:: $15.41
You Save:: $2.46

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Surface Burner Head (Gas Range/Cooktop)

5.0 (21)

By: Whirlpool

Part Number: WP7505P283-60

This surface burner head redistributes gas from the orifice to create an even flame on your range or cooktop. Replacing a clogged or damaged head helps restore reliable ignition and consistent heat for everyday cooking.

Channels gas to the burner ports for a uniform flame pattern
Works with the igniter/spark electrode to light the burner
Can help resolve weak, yellow, or uneven flames caused by blockage or wear
Common symptoms: burner won't light, takes multiple clicks to ignite, or flames that sputter/go out

What's included: One surface burner head. Install notes:

Disconnect power and shut off gas; allow the cooktop to cool
Remove grate and burner cap, then lift off the old head
Clean the orifice area; seat the new head squarely on the orifice
Reassemble and test ignition and flame; check for leaks if any connections were disturbed

This part fixes the following symptoms

Gas igniter glows, but will not light

Do-It-Yourself Stories from Customers like You Old appearance did a face lift Ira G. • Federal Way , WA • November 05, 2016

Received all parts as ordered and it took about a half hour to change out all parts. Read more

$180.23

Compare At:: $216.28
You Save:: $36.05

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Door Gasket

5.0 (10)

By: Whirlpool

Part Number: WP71001841

This high-temperature gasket seals the oven door to the cabinet. Replacing a worn seal helps your oven preheat more efficiently, hold steady temperatures, and reduces heat and vapor escaping around the door edge.

Maintains a tight seal between the door and oven cavity to retain heat
Supports accurate, consistent baking and roasting temperatures
Helps reduce longer preheat or cook times caused by heat loss
Replaces seals that are torn, brittle, flattened, or frayed

What's included: 1 oven door gasket. Installation notes:

Disconnect power and allow the oven to cool completely before servicing
Open the door and remove the old gasket, noting clip/screw locations and orientation
Clean the mounting channel; press the new gasket in place without stretching it
After installing, preheat and check for even contact all around the door

Do-It-Yourself Stories from Customers like You The control panel was no longer working lights were not coming on no beeps could be heard hen you hit a key on the control panel it first started with the 3 6 and 9 keys and became worse Randy S. • Houston , TX • June 24, 2017

I replaced the old control panel with a new one. I also changed out the door seal to help prevent the control panel from going bad a second time. It was the heat from the oven getting to the keypad on the control panel that caused it to go bad. Read more

$81.33

Compare At:: $96.78
You Save:: $15.45

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Door Hinge

5.0 (5)

By: Whirlpool

Part Number: WP71003353

This oven door hinge supports the door and controls its movement. Replacing a worn hinge restores smooth opening and closing and helps the door seal properly against the gasket for accurate temperatures and safer operation.

Supports and pivots the oven door during opening and closing
Provides closing force to help the door seal against the gasket
Helps maintain correct door alignment
Common symptoms of a worn hinge: door won't close fully or sits uneven, drops/slams or won't stay partially open, heat loss or long preheat, squeaking

What's included: 1 door hinge Install notes:

Disconnect electrical power; for gas ranges, also shut off the gas supply. Allow the oven to cool completely
Support the door; hinges are spring-loaded—use caution when releasing/engaging hinge locks if equipped
Transfer any original mounting screws/brackets as needed
For best results, replace both door hinges together to maintain even alignment

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Broken hinge. Jack M. • Tulsa , OK • February 12, 2018

Oven door had been acting up for years (difficult to close). One of the hinges finally broke, so I ordered a replacement. Installation was about as easy as it gets. One trick: FIRST get a paperclip (or small nail or something similar) and put it through the hole in the existing hinge that you are not replacing to keep the hinge from retracting all the way later when the door is removed. If you don't, the hinge could pinch your finger or hand when the door is removed and it snaps closed. At a... Read more

$197.53

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Terminal Block

4.0 (3)

By: Whirlpool

Part Number: WP8203546

This terminal block is the insulated connection point where the appliance's incoming power ties into the internal wiring. Replacing a heat-damaged or loose block restores a safe, reliable electrical path and helps prevent arcing and intermittent power loss.

Connects the supply conductors to the unit's internal wiring
Provides insulated posts to securely fasten and distribute power
Helps maintain tight, low-resistance connections
Common failure signs: melted/discolored plastic, burned or loose terminals, arcing, scorching, or intermittent/no power after confirming the cord and breaker

What's included: 1 terminal block Install notes:

Disconnect power at the breaker or unplug the appliance; verify no voltage before servicing
Photograph or label wire positions to ensure correct reassembly
Inspect and replace any heat-damaged wire ends or lugs; use appropriate terminals
Tighten connections securely and ensure wires are fully seated and strain-relieved as originally installed

Do-It-Yourself Stories from Customers like You Bad terminal block Michael M. • Ronkonkoma , NY • June 29, 2015

Replaced it with the part I got from you. Read more

$22.95

Compare At:: $27.54
You Save:: $4.59

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Light Lens

5.0 (11)

By: Whirlpool

Part Number: WP9781049

Color: clear. Measures about 3 inches in diameter.

Do-It-Yourself Stories from Customers like You Intermitten mini explosions in the oven when trying to use Jerry L. • Canton , GA • December 28, 2015

Troubleshot the oven by checking the broiler which worked good (same fuel valve). After reading the some tips about troubleshooting the Glow Ignitor I could see the broiler ignitor got white hot and the oven ignitor only got bright orange (orange to red causes intermittent ignition or mini explosions). Watched the how to video and it was good information. You should be observant about which openings in the back of the oven as to where the two wires are coming out of. My oven is over 12 years... Read more

$52.30

Compare At:: $62.76
You Save:: $10.46

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Surface Burner Head (Rear, Black)

4.9 (16)

By: Whirlpool

Part Number: 74005189

Replace a clogged or damaged rear burner with this surface burner head in black. It channels gas to the flame ports so the rear burner lights reliably and delivers a consistent, even flame for everyday cooking.

Directs gas through precisely sized ports to form the rear burner flame pattern
Interfaces with the spark igniter/electrode for dependable ignition
Helps restore proper burner performance when ports are worn, corroded, or blocked
Common symptoms: burner clicks but won't light, uneven or weak flame, yellow tipping, delayed ignition

What's included: One rear surface burner head in black. Install notes:

Shut off gas supply and disconnect power before servicing
Remove grate and burner cap; take out mounting screws and lift the old burner head straight up over the igniter
Align the new head over the orifice and igniter; secure with the existing screws
Reassemble and test for proper ignition and flame on all burners

This part fixes the following symptoms

Gas igniter glows, but will not light

Do-It-Yourself Stories from Customers like You Wanted to convert gas grill side to additional burners Scott F. • Harrisburg , PA • October 14, 2017

I ordered replacement parts to convert the side to individual burners. Read more

$152.95

Compare At:: $183.54
You Save:: $30.59

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Jenn-Air Svd48600p Parts

Oven Temperature Sensor Kit

Grease Filter

Screw

Element, Bake

Broil Pan Set

Oven Broil Element

Oven Light Assembly

Grate Kit

Screw, 1 Piece

Door Strike

Surface Burner Head (Gas Range/Cooktop)

Oven Door Gasket

Door Hinge

Terminal Block

Light Lens

Surface Burner Head (Rear, Black)