Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the lower spray arm in place. Replace if tabs are broken, worn, or missing, causing the spray arm to detach or not lock down properly. Installs under filter.
Replace the sprayer in the middle of the dishwasher, the problem was the grommet on the back of it but it's not available individually. Read more
Bottom protective panel that installs beneath the dishwasher door. Replaces cracked, dented, broken, or missing kickplates from impact damage or wear.
Easy job, I screwed the parts to the dishwasher Read more
Replacement water inlet hose for dishwashers. Connects water supply to the tub. Replace if cracked, leaking, or damaged by pests or wear.
Replaced hose Read more
Seals the upper spray arm delivery tube connection in your dishwasher. Replace if water leaks from the spray arm mount or arm becomes loose. Verify fit.
Replaced the upper spray arm tube with a new one. Also replaced delivery tube grommet and the delivery tube gasket. Now everything works fine and no more leaks. Read more
Covers the gap beneath your dishwasher for a finished look. Replace if cracked, broken, or missing. Installs at base with screws (sold separately).
Connects the door spring to the hinge on your dishwasher. Replace if broken, detached, or missing to restore proper door tension and balance.
I first wanted to get the dishwasher running, before ordering the spring links. So I disassembled the pump / motor assembly to determine the reason the motor would not start. My wife cleaned all of the parts in the pump assembly. I took the motor apart and discovered that the lower bearing ( a sleeve type bearing) was dry and dirty, and was the culprit for the motor seizing. I cleaned up the bearing and lubricated it with SAE 20W. I also packed felt inside the cavity adjacent to the bearing.... Read more
Refrigerator not cooling? Compressor won't start? This inverter board controls compressor speed and cooling. Moderate DIY repair with electrical testing.
Took out the old part and replaced it with the new part. Now all is working. Thank you so much. Read more
Prevents debris from clogging your dishwasher drain. Replace if parts won't lock in place, wobble during cycles, or show wear. Twists to lock securely.
The fix took 30 seconds. The key to success was your video that explained how reinstalled parts "lock in". Read more
Replacement rail for dishwasher upper dishrack. Installs inside tub to guide rack sliding. Replace if cracked, bent, or causing rack to fall off track.
Replaced four rollers & slide. Read more
Seals the rear of your dishwasher's circulation pump to prevent leaks. Replace if you notice water pooling or dripping from the motor area.
I first thought the leak came from the pump assembly rear o ring. I was wrong. The water was leaking from the pump. The pump assembly was shipped in 1 1/2 days with 2 more o rings. I lubed the o rings with dish soap, they slid in perfectly. reinstalled the clamp and screws and was ready to reinstall the dishwasher. Worked great. Next time I will buy the pump the first time. Buying the o rings separately adds $$. Read more
The Front O-Ring is an OEM part for Frigidaire dishwashers. This component is essential for maintaining a watertight seal in the front areas of the dishwasher's internal systems, such as around the pump or valve connections. It prevents water leaks and ensures the efficient operation of the dishwasher. The rear O-ring is part number AP2109101
Causes of a bad front O-ring can include regular wear and tear, exposure to high temperatures, and chemical degradation from detergents and rinse aids. Over time, the O-ring may dry out, crack, or become deformed, leading to leaks and decreased performance.
Symptoms of a bad front O-ring include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
If your dishwasher door won't latch or stay closed, the door strike may be broken or corroded. This repair takes about 15 minutes with basic tools.
Replaced the door strike Read more
Secures the kickplate toe panel at the bottom of your dishwasher. Replace if screw is stripped, missing, or damaged during kickplate removal or repairs.
The Vegetable Pan Lid is an OEM replacement part for GE refrigerators. Located in the refrigerator door, the vegetable pan is designed to store fruits and vegetables in a humid environment to retain freshness longer. Color: white. Measures about 15-1/2 inches wide by 7 inches deep.
Over time, the vegetable pan lid can become cracked or warped due to frequent use, exposure to heavy items, or temperature fluctuations. A damaged lid can lead to improper sealing, which can compromise the freshness of the stored produce.
Symptoms of a failing lid include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Door bins were easy to install by removing old ones and slipping in the new ones. Took only a few minutes to complete repair. Lid also was easy to install with only one screw to remove and replace the new one. Read more
Fix a dishwasher that stops mid-cycle, overheats, or won't heat water. This thermostat regulates temperature during wash cycles. Moderate DIY repair.
So I replaced the hi-temp thermostat and the problem is fixed. Read more
Upper rack wheel assembly for dishwashers. Includes wheel and mounting bracket. Replace if cracked, broken, or causing rough rolling of the upper rack.
Got the make and model. Put it in your web site order form and watched the video. The part came the replacement part was made and job done. Thanks. Great parts, fast shipment and again job done. Read more