Cfe3050lsk Parts

This French-door refrigerator door gasket in Dorian Gray seals the fresh food door to the cabinet, helping keep cold air in, reduce moisture, and maintain stable temperatures for reliable food preservation.

• Creates a tight seal between the refrigerator compartment door and frame on French-door models
• Helps maintain correct internal temperature and reduce air leaks
• Replaces a torn, cracked, shrunken, or warped gasket
• Common symptoms: visible gaps or light around the door, door not sealing, condensation or frost at the door, or temperature fluctuations

• Disconnect power before servicing.
• Let the new gasket warm to room temperature; use warm water or low heat to relax any folds.
• Clean the door channel; seat the gasket corners first, then press the lip fully into the retainer all the way around.
• Close the door and check for even contact; use gentle heat to fine-tune the seal as needed.

This lower freezer basket restores safe, organized storage in the bottom compartment. Replace a bent or missing basket to keep food contained and maintain smooth access to items. What it does:

• Holds and organizes food in the lower freezer compartment
• Engages with existing rails or supports for easy access
• Replaces a cracked, bent, or missing basket to restore fit and function
• Helps prevent items from falling into gaps or interfering with movement

• 1 lower freezer basket

• Empty the area and fully access the lower compartment before removal
• Lift out the old basket; align the new basket on the side rails/supports and set into place
• Do not force; clear any ice buildup on rails/supports before installing
• Wear cut-resistant gloves to protect hands

Restore lost shelf space on your refrigerator door. This fresh food door bin replaces the lower bin, providing secure storage for bottles and condiments and snapping into the door tabs to keep items upright and accessible.

• Provides organized storage in the lower position of the fresh food door
• Attaches to molded door tabs for a secure, stable fit
• Replace if cracked or broken
• Helps prevent items from tipping or falling when the door opens and closes

• Disconnect power and remove items from the affected door area before starting
• Lift the old bin straight up and out of the door tabs
• Align the new bin with the tabs and press down evenly until fully seated—do not force
• Verify the bin is level and secure before reloading items

This Mullion Spring Sleeve is the small bushing that fits over the door mullion (center flipper) spring. It guides the pivot and reduces wear so the flap folds smoothly and helps maintain a tight seal between refrigerator doors.

• Provides a smooth bearing surface around the mullion spring/hinge pin for reliable pivoting
• Helps the mullion fold out on opening and spring back to close the center gap
• Wear or loss may present as a loose or binding flipper, clicking/grinding, or a gap that prevents a full seal
• Replacing the sleeve can help restore proper flipper action without replacing the entire mullion assembly

• Disconnect power and clear items from the door; remove the mullion from its top and bottom pivots, noting the spring orientation
• Slide off the worn sleeve from the spring/pin and install the new sleeve in the same position
• Reinstall the spring and mullion; verify the flipper opens/closes freely and the center seal makes full contact
• Wear cut-resistant gloves; edges around the door and hinge can be sharp

This is a grommet and it is intended for use on refrigerators and freezers. This is a genuine replacement part made by General Electric. A new grommet might be needed if the current one is visibly worn out or damaged in any way. If there are noises from vibration coming from the lower back area of the fridge there might be need for a new grommet. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with refrigerators and freezers, or units with a compressor and is made by General Electric.

This refrigerator display assembly replaces a damaged or unresponsive front control panel. It restores clear status indication and responsive controls so everyday settings are easy to see and select.

• Provides the user interface and status display for key refrigerator functions
• Sends control inputs from the touchpad/buttons to the appliance's electronics
• Ideal replacement for cracked, faded, or unresponsive display panels
• Common symptoms: blank or dim display, controls not responding, intermittent operation, or cosmetic damage

• Disconnect power to the refrigerator before servicing
• Remove trim/drip tray and mounting screws; release locking tabs to pull the panel forward
• Disconnect wire harness connectors carefully; avoid pulling on wires or ribbon cables
• Reconnect harnesses, seat the new assembly, secure fasteners, restore power, and test

This heat-resistant fiberglass oven door gasket seals the oven cavity perimeter, helping keep heat inside for consistent temperatures and efficient cooking. Replace a worn, frayed, or flattened seal to restore proper door sealing performance. What it does

• Forms a heat-resistant seal around the oven opening to minimize heat loss
• Helps maintain set temperature and overall cooking performance
• Can help address long preheat times, uneven baking, and hot air leaking around the door
• Replace if the gasket is frayed, brittle, compressed, or falling out of its channel

• Includes: 1 fiberglass door gasket

• Disconnect power and allow the oven to cool completely before service
• Remove the old gasket from its mounting slots or clips; clean the channel of debris
• Install the new gasket without stretching; seat it evenly around the perimeter with ends routed as originally positioned
• Close the door and check for uniform contact all around; adjust seating if needed

This factory fastener is a #8-18 x 5/8-inch Type AB screw designed for appliance assembly. It secures panels and components to restore a tight, rattle-free fit and dependable alignment. What it does:

• Thread-forming Type AB design engages thin metal or plastic components
• Secures panels, brackets, trim, or covers to reduce looseness and vibration
• Replaces missing, stripped, or corroded fasteners
• Helps maintain alignment for proper operation and reduced noise

• One screw

• Disconnect power before servicing; shut off water supply if working near water lines
• Use the correct driver for the screw head; start by hand to avoid cross-threading
• Tighten until snug—do not overtighten to prevent stripping or cracking plastic
• Repair damaged holes or replace worn clips/inserts before installing the new screw

• Size: #8-18 x 5/8 in (length 0.625 in)
• Thread type: Type AB, thread-forming

This screw fastens appliance panels, brackets, and trim so parts stay secure and aligned. Replace a missing, stripped, or rusty screw to stop rattles and restore a tight, factory fit.

• Secures covers, brackets, and trim to the appliance cabinet or liner
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration noise and loose or misaligned parts
• Maintains proper fit of guards, kickplates, or internal panels

• Disconnect power; turn off water supply if working near water lines
• Match to the original fastener to size and thread
• Start threads by hand to avoid cross-threading; tighten snugly, not excessively
• If threading into plastic, avoid overtightening to prevent damage

This refrigerator meat drawer restores a clean, dedicated space for meats and deli items in the fresh food section. Replace a cracked or missing pan to regain smooth sliding, proper fit, and organized storage.

• Provides a dedicated storage area for meats and deli items in the fresh food compartment
• Slides on existing tracks/rails for easy access and proper seating
• Helps contain drips and spills to protect shelves below
• Typical symptoms: cracked or broken drawer, broken tabs, won't slide or seat correctly, falls off tracks, or missing drawer

• Remove contents and pull the existing drawer straight out; lift slightly to clear the rails
• Clean and inspect the tracks/rails before installing the new drawer
• Align the new drawer with the tracks and slide it in until fully seated—do not force
• Allow the new drawer to reach room temperature before installation; cold plastic can crack if flexed

This top hinge supports the hinged top or upper panel, allowing it to lift for service and close securely. Replacing a worn hinge restores smooth motion and proper alignment to help eliminate wobble, scraping, or gaps.

• Provides the pivot point for lifting the top/panel
• Maintains alignment and helps the top seat flat when closed
• Restores smooth opening/closing without binding or rubbing
• Common signs of failure: loose or uneven top, squeaks, difficulty lifting/closing, visible bending or cracks at the hinge

• Disconnect power; also shut off gas and allow all surfaces to cool
• Support the top/panel while removing and installing the hinge to prevent strain
• Transfer and tighten existing mounting screws unless new hardware is provided
• After installation, check alignment and clearances; replacing hinges in pairs can improve fit

Size: 10-32 GXTT FLP.595 S

This heater harness installs in the refrigerator's fresh food section. It provides defrost heat and the correct wiring connections to clear frost from the fresh food evaporator, restoring airflow so the compartment cools evenly and reliably.

• Delivers defrost heat to the fresh food evaporator to melt frost and ice
• Includes the correct harness/wiring for a precise, plug-in connection
• Helps restore proper airflow and temperature regulation in the refrigerator compartment
• Symptoms include heavy frost on the fresh food evaporator cover or back wall
• Also presents as a warm fridge (with normal freezer) or fan noise from ice contact

• Disconnect power before servicing; use cut-resistant gloves
• Access is behind the fresh food evaporator cover; protect delicate fins and sensors
• Route the harness exactly as the original and fully seat all connectors/clips
• After reassembly, ensure the drain path is clear and the fan spins freely

This DC evaporator fan motor moves air across the evaporator coils and circulates chilled air throughout the compartments. Replacing a failing motor restores proper airflow to help maintain even temperatures and reduce frost buildup. What it does

• Circulates air across the evaporator to distribute cold air through the refrigerator and freezer
• Helps maintain stable temperatures and supports proper defrost performance
• Common symptoms of a failing motor include no or weak airflow, fan not running, loud or intermittent fan noise, frost/ice on the rear panel, or freezer cold while fresh food is warm

• 1 DC evaporator fan motor

• Disconnect power to the appliance before servicing
• Remove shelves/drawers and the evaporator cover to access the fan area
• Note wire/connector orientation; transfer the fan blade and mounting hardware from the old motor if your model uses separate parts
• Ensure the blade spins freely with proper clearance before restoring power and verifying airflow

This Duct Door Spring returns the dispenser ice chute door to the closed position and helps maintain a tight seal at the dispenser opening, reducing warm-air leaks, frost buildup, and melting or clumping ice.

• Provides the return tension for the dispenser duct/ice chute door after dispensing
• Helps keep cold air in and warm air out to limit frost and condensation at the dispenser
• Can reduce frost in the ice chute or ice clumping caused by air leaks

• Disconnect power to the refrigerator before servicing the dispenser
• Access the dispenser assembly; remove front panel/trim as required by your model
• Note spring orientation and engage it correctly on the duct door and pivot
• After installation, verify the door moves freely and seals fully before reassembly

The Freezer Drawer Slide Railan OEM part for GE refrigerators. This specialized drawer slide ensures smooth, easy opening and closing of refrigerator doors through even weight distribution across each side. 

Causes of failure can relate to parts wearing down after years of assisting thousands of door movements daily. A buildup of debris may also disrupt proper alignment.

Symptoms of deficient glide supports include: 

• Doors difficult to open or close fully  
• Squeaking or grinding noises noticeable in movement
• Excessive pressure is required from the user to engage seals

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.