Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.
It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube. I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to... Read more
Screens lint and debris from wash water as it exits the tub. Replace if damaged, missing, or clogged to restore proper draining. Verify fit by model number.
Bad drain pump impeller--installed new pump and filter you guys rock! right parts ,right price, on time! Read more
Connects the detergent dispenser to the wash tub in your washer. Replace if cracked, leaking, or causing water damage to other components during cycles.
First of all, I want to say that this is not the first time that I have used AppliancePartsPros. They give you everything you need in the most simplified manner to repair your appliances at home. I ran my washer until I started to see the leak coming from underneath. After verifying that the intake hoses, drain hose and pump were not leaking, I opened up the washer from the top by unscrewing the two screws on the back brackets and lifting up and out. Because the leak was displaying at the... Read more
Seals washer tub halves to prevent leaks between drum sections. Replace if leaking onto floor or between shell halves. Confirm fit with model number.
Separated shell and replace oring. Replaced springs and shocks. Read more
Interior door frame that holds the window glass and mounting points. Replace if cracked, warped, or broken to restore proper door alignment and latching.
New door hinge &inside &outside door rims new inside &outside door flanges &hinge take pictures of the door inside &out before taking it apart Read more
Seals hot and cold water connections to your washer's dispenser. Replace if you notice leaking at the inlet assembly. Confirm fit with your model number.
Water was accumulating in the drawer pedestal, it was leaking from the front of the washer so I thought it was the front door seal. I also noticed it would leak even when the washer was not being used so I doubted it was the door seal. I googled the leak problems and watched a few videos which gave me confidence on washer disassembly. With the top panel off I noticed the leak coming from the water inlet assembly. Appliance Parts Pro’s had the part and replacement video and I replaced the part... Read more
Fix a broken or missing detergent dispenser cover that's cracked or won't guide proper detergent placement. Simple 5-minute replacement repair.
After examining it, 2 of the 4 retainer clips had broken off. My wife grabbed her tablet, found Appliance Parts Pros website, saw 2 videos featuring our exact model of washer and ordered the 3 parts to replace broken and soon to fail parts ! Shipping was extremely fast ! Took out old assembly, replaced with new assembly in about 15-30 second, wife was happy, therefore I was happy ! Thx for being there ! Read more
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy Read more
Fix E53 errors, no spin, or drum not moving. This motor control board restores washer operation. DIY repair in 45 minutes with our installation video.
After taking the top off the washer I found the Tech Data Sheet ( for repair person ) The E53 code was listed as Low Voltage to the motor board and referred me to test #15. Which stated to check the "drum water NTC" ( Negative Temperature Coefficient or Thermistor). What was misleading was that there are 2 NTC's. If your washer has a "Sanitize" feature , then there is a drum water NTC as well as one on the fill valve body. IF you have the sanitize feature then you need to replace the drum water... Read more
Replaces the cracked or broken outer door panel on your washer. Restores door alignment and supports the glass. Fixes broken hinge tabs or worn trim.
First problem was figuring out the correct part to order. I went to the Frigidare website for help there. The door was sandwiched in several layers. The part that broke was of course the plastic one. The door was poorly designed having a piece of plastic support heavy glass and metal! My brother, an engineer actually did the repair as it required three people to install the reassembled door. It is easy to reassemble, but key was the four white plastic "sleeves" that were recycled back into the... Read more
Fix a washer that fills slowly, won't fill, or leaks water when off with this water inlet valve. DIY repair takes about 30 minutes with basic tools.
Put in a valve Read more
M5 x 0.8 metric machine screw secures panels and internal assemblies. Replace missing, stripped, or damaged fasteners to restore tight fit.
Ordered new hinge and outer and inner door. Super easy to fix and the repair video made it simple and easy! Very pleased! Fast shipping! Read more
Washer won't spin or makes loud noises? A faulty drive motor is often the cause. Moderate DIY repair with video guide. Fixes E58 error codes.
Tested the resistance of the motor windings. They showed around 2.5 ohms. This proved that the motor was bad. The new motor showed around 3.5 ohms. I installed it back in place and the washing machine worked fine. Read more
Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.
New hose and clamp. Read more
Plastic door cover
Removed from dryer with screwdriver and opened door to access outer glass panel. Replaced with new one and reassambled. Read more
This replacement screw secures appliance panels and components. With a #10-16 thread and 0.75-inch length, it replaces stripped, rusted, or missing hardware to restore a tight, rattle-free fit and reduce vibration and noise.
Ordered parts from appliancepartspros.com then saw the video they made on replacing door. Then completed door within 30 minutes. Very easy and fast thanks to parts pros video! Read more