De634a Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Screw

4.8 (4)

By: Whirlpool

Part Number: WP3390631

10 - 16 x 1/2

Do-It-Yourself Stories from Customers like You Agitator wasnt sloshing Paige B. • Clarksville , TN • January 30, 2015

I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more

$7.48

Compare At:: $8.90
You Save:: $1.42

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Spring Fastener Retaining Clip

5.0 (6)

By: Whirlpool

Part Number: WP22001650

Secures components with constant tension to prevent looseness and vibration. Replace if broken, fatigued, or missing. Verify fit with your model number.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Drum guides had worn out Robert S. • North Apollo , PA • October 08, 2014

Replaced them. Read more

$9.63

Compare At:: $11.36
You Save:: $1.73

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Idler Bracket Spacer

4.9 (9)

By: Whirlpool

Part Number: WPW10116756

Maintains proper spacing and alignment in your dryer's belt path. Replace if you hear squeaking or notice belt tracking issues. Verify fit with your model.

Do-It-Yourself Stories from Customers like You The motor burned up after 28 years Robert M. • Paw Paw , MI • December 20, 2016

I replaced the motor and all other moving components along with the felt drum seals.drum glides and drive belt. The wiring instruction is where i had the most problems. Because my wiring had only 4 wires in the harness not 5, and one was a different color then the instructions call out, I believe was because it might have been and older model. the instruction called for a gray wire but mine was white with a blue piggy back wire attached. but after finding a few videos on line i figured that the... Read more

$34.23

Compare At:: $40.73
You Save:: $6.50

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jumper Wire

4.5 (10)

By: Whirlpool

Part Number: WPY304693

This jumper wire links two terminals in the appliance's wiring harness to complete a required circuit. Replace a burnt, broken, or heat-damaged jumper to restore reliable power flow and prevent intermittent operation or arcing at the connection.

Bridges designated terminals to provide proper continuity per the wiring diagram
Helps deliver power to the intended component or control
A failed jumper may cause a component to not energize, no or intermittent heat, or an element/burner that won't operate
Visible signs of failure include melted insulation, discoloration, or burnt/loose connectors

What's included: 1 jumper wire Installation notes:

Disconnect power at the breaker; turn off the gas supply before servicing
Follow the tech sheet/wiring diagram; move one connection at a time to the same terminals
Ensure tight, fully seated spade connections on clean terminals; do not force mismatched sizes
Route wiring away from sharp edges, moving parts, and hot or high-voltage areas; replace any heat-damaged mating terminals

Do-It-Yourself Stories from Customers like You Our 35 year old maytag dryer stopped heating Chris P. • Victor , NY • August 15, 2015

I ordered all the parts necessary to replace the heating element and thermostat on a Sunday night. Appliance Parts Pros shipped on Monday AM and I received them on Wednesday. It took me 45 minutes to disassemble the dryer, replace the parts and have the dryer working again. It should be good for another 35 years which should cover me for my needs. Thanks again to Appliance Parts Pros for having the best service and always the correct parts. I am a huge fan of your company as you never... Read more

$5.95

Compare At:: $7.14
You Save:: $1.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Frigidaire part

Dryer Timer Control

5.0 (2)

By: Frigidaire

Part Number: 131719100

Timer won't advance or dryer runs continuously? This timer control restores proper cycle progression in auto and timed modes. DIY-friendly repair.

This part fixes the following symptoms

Doesn't shut off
Timer will not advance

Do-It-Yourself Stories from Customers like You Dryer timer would not turn and knob broke from the strain Bruce B. • Birmingham , AL • October 17, 2014

I ordered the timer and knob on Monday, they arrived around noon on Tuesday, and within an hour I had them installed and back in business. I was amazed how quickly the parts got here. The online video showing the procedure step by step was very helpful. Instead of disconnecting all the wires and having to keep up with which one went where, I moved each wire one by one and made sure I didn't get any of them in the wrong place. The only thing that slowed me down a bit was seeing which side of the... Read more

$179.71

Compare At:: $212.06
You Save:: $32.35

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Frigidaire part

Dryer Terminal Block

5.0 (12)

By: Frigidaire

Part Number: 134101400

Dryer won't start or smells like burning? A melted or loose terminal block where the power cord connects is often the cause. Easy 20-minute repair.

Do-It-Yourself Stories from Customers like You Frigidaire front load dryer was beeping and i could not get display to go off it actually dried clothes fine but in middle of night the beeping would start unable to get error codes Ronald B. • Haverhill , MA • September 11, 2015

Let me tell you that the videos made by AppliancePartsPros.com are what I needed most. They are simplified and complete. It turned out that because of a loose connection at the power terminal block, it over heated, melting the block and of course frying the wiring and distorting the connections. The erratic power supply must have damaged the control board. I ordered the terminal block and control board and although a little time consuming for a rookie, I got it working first time. I actually... Read more

$41.47

Compare At:: $49.35
You Save:: $7.88

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Motor Clamp

5.0 (7)

By: Whirlpool

Part Number: WP660658

This part is a motor clamp. This is a genuine OEM part and has been sourced directly from the manufacturer. This part is intended to replace a deteriorated, damaged, or broken motor clamp on certain makes of indoor appliance models. Motor clamps are essential for properly securing the drive motor on various types of indoor appliances such as washers, dryers, and refrigerators. Without the use of a motor clamp, the drive motor is free to move around or become detached. This can easily cause serious damage to the equipment and prevent proper functionality. Proper tools are needed to replace this part and appropriate safety measures should be adhered to when working on any type of equipment. For accurate information on how and where to install this replacement motor clamp, specific manufacturer diagrams should be referred to.As an authentic replacement part, this motor clamp can be used on multiple different models of washers, dryers, refrigerators, and washer/dryer combos manufactured by Kenmore, Maytag, Whirlpool, and Amana. Please note that this motor clamp is a genuine part made of high-quality materials and is sold individually.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Motor was bad and also needed general maintenance. Daniel E. • Litchfield , IL • April 14, 2020

Took it apart. Replaced various general maintenance parts, rollers, seals, clean out all the lint and replaced motor and put a new blower on it. Read more

$10.37

Compare At:: $12.44
You Save:: $2.07

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Dryer Blower Seal

4.5 (6)

By: Whirlpool

Part Number: WPY312901

Seals blower housing to prevent air leaks and lint escape. Replace when you notice lint buildup in your home or reduced drying efficiency. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Making loud squealing sound when dryer was turned on Michael M. • Plainfield , IL • November 19, 2018

Took the front panel off (the door front), disconnected the connector to the door switch and used a wooden clothespin to bypass the door switch. Turned on the dryer to locate loud squeaking sound and found it was coming from the motor area. When I started to take the blower section apart from the motor, that is when I saw the "blower wheel" slipped off the motor shaft. The blower wheel has a "C" clip retainer and compression ring to keep it snug on the motor shaft (but it was loose). Now I... Read more

$49.25

Compare At:: $59.41
You Save:: $10.16

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Frigidaire part

Dryer Cycling Thermostat

5.0 (4)

By: Frigidaire

Part Number: 131298300

Dryer won't heat or overheats? A failed cycling thermostat can't regulate temperature. This direct-fit part takes 15–30 minutes to replace.

This part fixes the following symptoms

Too hot

Do-It-Yourself Stories from Customers like You Rubbing blocks and felt that seal the front of the drum are worn drum is sagging and staining clothes with smears of rust Seth W. • Upper Arlington , OH • January 23, 2016

Replaced upper and lower felts. Painted rubbing surface on inside of drum with refrigerator enamel. Took out drum and lubed rear bearing. Replaced 2 of the 3 thermostats, and the belt just on principle. Spent a lot of time with shop-vac removing lint from drier and exhaust ducts. Runs great and is no longer cooking or staining clothes. Read more

$50.57

Compare At:: $60.68
You Save:: $10.11

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Rubber Foot

5.0 (1)

By: Whirlpool

Part Number: WPY314137

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

Do-It-Yourself Stories from Customers like You Unlevel and shaking moving out of position cracked dryer igniter Steven B. • Grantsville , WV • April 26, 2016

Replaced dried crumbling rubber foot. Cleaned inside and outside of dryer before installing igniter cleared vent hose. Leveled unit installed dryer igniter. Fired it up.Runs Great Now. Read more

$7.95

Compare At:: $9.38
You Save:: $1.43

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Adjustable Leg

5.0 (5)

By: Whirlpool

Part Number: 22003428

Leg, adjustable (w/nut)

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

$16.95

Compare At:: $20.17
You Save:: $3.22

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Frigidaire part

Touch-Up Paint

4.9 (12)

By: Frigidaire

Part Number: 5303321319

The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.

The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.

Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.

Symptoms of needing Touch Up Paint include:

Visible scratches or chips on the appliance's surface.
Areas of rust or corrosion that need to be covered after treating the rust.
The desire to maintain or improve the appliance's appearance for aesthetic reasons or to maintain its value.

Do-It-Yourself Stories from Customers like You Small chip in the frigereator Julia J. • Maple Grove , MN • October 03, 2015

Quick touch up. The paint worked great. Packaged with a brush like nail poliish Read more

$10.95

Compare At:: $12.92
You Save:: $1.97

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Leveling Leg Pad

5.0 (8)

By: Whirlpool

Part Number: WP210684

The Leveling Leg Pad is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order 22003428.

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Washer "bucking" while in spin cycle Luis P. • Loveland , CO • June 27, 2017

New leveler pads Read more

$11.78

Compare At:: $14.02
You Save:: $2.24

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Frigidaire part

Dryer Heating Element Coil

4.9 (36)

By: Frigidaire

Part Number: 5300622032

Fix a dryer that won't heat with this heating element coil. Common DIY repair takes about 30 minutes. Requires disassembly to access heater chamber.

This part fixes the following symptoms

No heat or not enough heat

Do-It-Yourself Stories from Customers like You Frigidaire dryer feq332es0 stopped heating Matthew G. • Palmyra , NY • February 21, 2015

First, let me tell you that this is the fifth appliance I've fixed with parts and help from AppliancePartsPros.com -- At this rate I'll never get to upgrade to nice new appliances. :-( When my wife said the dryer wasn't heating up, I looked online for common causes before I even headed to the basement. A lot of people talk about the fuses going bad, so I figured that's what it was. Next, I watched the videos on how to get to the internals of the dryer. (I hate it when I try to figure it out... Read more

$37.95

Compare At:: $44.78
You Save:: $6.83

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Dryer Terminal Insulator Assembly

3.8 (6)

By: Whirlpool

Part Number: Y304596

Insulates and supports electrical connections through the dryer chassis. Replace if cracked, heat-damaged, or broken to prevent shorts and restore safety.

Do-It-Yourself Stories from Customers like You Our 35 year old maytag dryer stopped heating Chris P. • Victor , NY • August 15, 2015

$26.95

Compare At:: $32.34
You Save:: $5.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Motor Retaining Clip

4.7 (3)

By: Whirlpool

Part Number: WPY015825

This motor clip secures a motor to its mounting bracket or housing, keeping it aligned and stable during operation. Replacing a bent, broken, or missing clip helps stop rattling and prevents the motor from shifting. What it does:

Retains the motor on its mounting bracket or frame
Helps maintain alignment to reduce vibration and noise
Prevents movement that can cause rubbing or wire strain
Direct replacement when the original clip is damaged or missing

What's included:

One motor clip

Installation notes:

Disconnect power before servicing; allow all moving parts to stop
Access the motor area, note the clip's orientation, and remove the damaged clip
Seat the motor fully, then install the new clip to secure it to the bracket
Inspect related mounts/grommets and wiring for wear; verify clearances before restoring power

Do-It-Yourself Stories from Customers like You Very loud rumble and grinding noise. Burning smell. Richard C. • Westminster , CA • November 11, 2023

Ultimately is was discovered and caused by the blower wheel shaft opening was cracked and broken. Replaced blower fan wheel. Read more

$14.41

Compare At:: $17.29
You Save:: $2.88

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

De634a Parts

Screw

Washer Spring Fastener Retaining Clip

Dryer Idler Bracket Spacer

Jumper Wire

Dryer Timer Control

Dryer Terminal Block

Motor Clamp

Dryer Blower Seal

Dryer Cycling Thermostat

Rubber Foot

Adjustable Leg

Touch-Up Paint

Leveling Leg Pad

Dryer Heating Element Coil

Dryer Terminal Insulator Assembly

Motor Retaining Clip