Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Ignitor Assembly is an OEM replacement part for Frigidaire dryers. It serves as the ignition source safely firing up burners to initiate drying cycles.
Causes usually relate to the continual thermal shock experienced from heating and then rapidly cooling over extended use. As a foundational safeguard, ignitors require OEM replacement when arcing declines.
Symptoms of a faulty ignitor can include:
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Frigidaire Gallery gas dryer from maybe 15 years ago. Based on the fact the the smell was only in the dryer, I concluded it must be the gas valve failing to completely seal when closed. After looking at the insides again, I suppose it is possible that it was a connection near the burner, but that stuff had remained untouched for 10 years so I still think I made a good assumption. I got a new ignitor as well since I was in there, and compared to the valve, it was cheap! I thought I could get in... Read more
Fix water leaking from your dishwasher or overfilling issues. This float assembly monitors water levels to prevent overflow and flooding damage.
Dryer door won't latch or stay closed? This door latch kit restores secure closing. Simple snap-in installation takes under 5 minutes, no tools needed.
Took all of 5 minutes parts was a lot cheaper than others I looked at and was the same thing Read more
Fix dishwasher drainage issues with this sump cover and filter. Screens debris from clogging drain lines. Easy DIY repair in 5-15 minutes with basic tools.
I followed the video instructions that is on the website and was able to replace the motor easily and in 15 minutes maybe less. Read more
Flat-style dryer drum belt wraps around drum and motor pulley to spin clothes. Replace when belt breaks, frays, or drum won't turn. Confirm fit by model.
Replaced upper and lower felts. Painted rubbing surface on inside of drum with refrigerator enamel. Took out drum and lubed rear bearing. Replaced 2 of the 3 thermostats, and the belt just on principle. Spent a lot of time with shop-vac removing lint from drier and exhaust ducts. Runs great and is no longer cooking or staining clothes. Read more
For a complete drum bearing and shaft kit order 5303281153.
I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more
This metal mounting bracket secures the circulation pump motor inside the dishwasher. It holds the pump assembly firmly in place to prevent vibration and ensure proper alignment with the wash system. Replace this bracket if it is cracked, bent, or corroded, which can cause excessive noise, vibration, or misalignment of the pump during wash cycles.
Bought combination set Motor & pump/ pump assembly plus new thermostat/ bracket. Exchanging motor and pump took about 15-30 min. Getting the dishwasher out and back took at least 30 min plus each way. Online video helped a great deal Read more
Fix a dishwasher that won't start or run because the door won't latch. This strike receiver allows the latch to engage and signal a closed door.
I have a Kenmore dishwasher and this is the second time doing this repair. The dishwasher door wouldn’t click in place when closed and the lights on the control panel wouldn’t turn on. My kids like to push on the handle to get onto the counter causing the latch assembly piece to break after awhile. It’s a simple fix with the hardest part being getting the front panel lined back up to put back on. I ended up not needing the strike piece but got it just in case it had been bent. Read more
Secures components and panels inside your dishwasher. Replace if cracked, broken, or missing to restore proper alignment and prevent rattling or shifting.
Searched for the dishwasher model number and part and was able to fin several sites that had this part. This site was by far the cheapest price. Even with 2-day shipping g I paid far less than anywhere else I found it. The orriginal part was difficult to take off but we just used a screw driver to pry it off. The new one just went on. Read more
Guides the door balance cable in your dishwasher's hinge system. Replace if cracked, broken, or causing squeaking when opening the door.
Easy fix, just pull out dishwasher a little for side access. Just make sure you get left & right pulley's. And change both while you're there. Read more
This dishwasher turbidity sensor measures how dirty the wash water is and reports to the control. Replacing a faulty sensor can restore proper cycle times and cleaning performance for consistent results.
I replaced the sensor and the seals around the door. Read more
Seals the connection between the dishwasher tub and sump assembly. Replace if water leaks from the base or the gasket appears cracked or flattened.
Following the great video on the site, I pulled the motor off and was about to put the o-rings on when I noticed there was rust on the motor shaft. Very close inspection showed the o-rings were still good. Not having time to order a motor, and a local store was having a sale, I replaced the whole unit. Read more
Guides the dishwasher door balance cable for smooth operation. Replace if cracked, worn, or causing squeaking when opening or closing the door.
Set of 8 screws and washers.
Dishwasher worked fine except the top rack would keep coming off the rails, could see the rollers needed replacement. Washer is 10 years old, and in that time the rollers had become brittle and broken. At first tried to use old screw and washer, but washer was impossible to remove from screw as I have hard water and the calcium deposits seemingly cemented it. Order this screw and washer set and within 5 minutes of getting easily replaced the old rollers. The video was very helpful, as was the... Read more
Sound dampening insulation blanket that installs inside the dishwasher cabinet. Replace if missing, torn, or deteriorated to restore quiet operation.
Added Insulation blanket. Read more
Secures dishwasher thermostat to base for accurate temperature sensing. Replace if loose or broken to prevent overheating. Verify fit by model number.
So I replaced the hi-temp thermostat and the problem is fixed. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.