Dmt-800Rhs Parts

Took off access panel, found leaking part. Looked it up with appliance pro and ordered the part, a new valve. Valve arrived in 2 days. I put the new valve on and we're back in business! Fast shipping, reasonable prices and the shipping charges were not more than they should be. excellent experience, will do business again! Read more

Research indicated that it may be a moisture sensor failure or a leak. It ended up being a leak from the oil seal on the motor shaft. A small piece of plastic made it's way into the system. The hot water softened it enough that it wrapped around the motor shaft, re-hardened, then tore into the shaft seal. I fixed it by replacing the shaft seal, moisture sensor (corrodes when it gets wet), and replaced the sump seal since I had it disassembled. Read more

New fan motor and duct work. Read more

Replaced it with a part purchased from AppliancePartsPros.com. Read more

• Will not dispense detergent

Removing the door panel was easy -- remove 6 Torx screws, and the panel falls off. Next you need to remove an electrical plug and 2 individual wires from the old dispenser. The plug came right off, but the wires were not easy to access, and they fought me more than I expected. With some pliers and wiggling, they eventually let go and came free. The dispenser is held in place with 6 Phillips screws through 2 removable metal brackets, and those came out easily. The toughest part of the job... Read more

2 year old dishwasher- "LE" leak sensor - found tinny leak in the shorh drain hose in - upon removing it this hose was found to be BRITTLE - VERY BRITTLE - main drain hose is fine - samsung says that this isnt a problem but have read quite a few complaints - easy fix unce unit is turned upsidedown. Read more

Based on the apparent relation to draining that I found on the internet I decided to open/unscrew the areas under the bottom rack where the water is pumped out. One obvious issue I observed was the drain check valve was turned and not functioning. It appeared to be swollen and stretched. When the new "Vane-Check" valve arrived it was not swollen and fit perfectly. I assume heat swells it up over time. I replaced three other seals while I had it apart. The one under the chopping blade was... Read more

Purchased a HEAVILY discounted damaged dishwasher from a big box appliance store. I looked up and purchased the part needed for door hinge damaged when shipped. I knew the price of part and delivery timing before I purchased the appliance. Brought home the dishwasher and the part arrived 2 days later just as promised and the correct part. Installed the hinge bushing and installed dishwasher. Works perfectly. The easy way to ID and order parts allowed me to save more than 2/3 of the price of the... Read more

I ordered the new arm and retainer. The parts came in just a few days, even with the cheapest shipping, and took about 2 minutes to swap out. For around $40, the problem was solved! Read more

I removed the dishwasher, put it on its side, used a needle nose plier to remove the snapped piece of leg and screwed the new one in. Read more

Deduced that the sound was coming from the blower in the front door. Removed old fan and found that the blades had warped and were hitting the housing. Replaced the blower assembly and all is good. For now. Read more

Replaced missing parts Read more

Ordered replacement piece Read more