Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Outer door handle assembly for microwaves. Installs on the exterior door panel for opening and closing access. Replace if broken, cracked, or damaged.
Ordered a new handle and replaced the old handle. Read more
The Installation Hardware kit is an OEM part for GE Built-In and Over-the-Range microwaves. It contains all mounting screws and brackets needed for installation into upper kitchen cabinetry.
Symptoms of faulty or inadequate hardware include:
Causes can be stripped screw holes, worn brackets, or omitted/lost original hardware disrupting a snug fit. Replacing with this hardware ensures safe support of weighty microwaves above cooktops.
Compatible with GE Profile, Hotpoint, and some Kenmore units, it facilitates installation or re-installation without frustration.
Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.
We followed the manufacturer's instructions about re-positioning the fan motor and installing the vent damper (easy). We constructed a duct system from the microwave to the outside of the house (challenging). We used 3.25" x 10" metal duct to start the system through the wall behind the microwave, where we added framing to reinforce a cut stud. We ran the duct up a closet wall and through its ceiling into the attic. We had to make an offset duct piece from 3.25" x 10" metal duct to clear a... Read more
Rotating glass tray for even microwave cooking. Replace if cracked, chipped, or wobbling due to worn hub. Confirm fit with your exact model number.
New one Read more
Turntable stopped rotating or making grinding noise? Replace the turntable motor to restore smooth tray rotation. DIY repair in under 15 minutes.
I replaced the motor by removing 5 screws from the bottom of the microwave and 1 screws from the motor. Very easy to replace, I didn't even have to remove it from the wall (I unplugged it just in case). Read more
Microwave not heating but still running? The magnetron converts electricity into microwave energy. DIYers report 1-hour installs with proper safety.
Chatted with a verified expert at justanswer.com (for a fee), he confirmed the parts I needed. AppliancePartsPros.com had them in stock AND they were 100% returnable/refundable if I didn't use them or weren't what was bad, even if I installed them! Where can you get that kind of guarantee anymore? Used some YouTube videos to learn how to support the microwave to get it down, & we moved it to the table, I took out the old magnetron and high voltage diode and replaced with the OEM magnetron and... Read more
Charcoal filter removes grease and cooking odors in over-the-range microwaves. Replace when clogged or after 6 months. Verify fit by model number.
Well, after I accessed the place where the charcoal filter would be, I found out that there was NO CHARCOAL FILTER AT ALL! No wonder the circulating fan did not take cooking odors out of the room! So your website told me what to order, I ordered it and it was here in no time! So, the microwave was installed by the builder of this house and he never installed the filter. The previous owner must not have done a whole lot of cooking, but we do. So we will now have the air filtered when we cook and... Read more
Fixes microwaves with no power or that stop mid-cycle. This thermostat switch monitors temperature and protects against overheating. Simple repair.
This is a 25 year old built-in over-the-range appliance. Only previous problem was 1 failed door switch (of 3 total), replaced 2 years ago. First checked all 3 door switches with continuity tester, all ok. Had advice to check thermostat switches, which were all supposedly NC (normally closed), used same tester. Found one thermo that was open, ordered and installed replacement, but oven still dead. Used heat gun to warm the open thermo (while not installed) and using tester again, found that... Read more
Replacement door handle assembly for microwave exterior. Installs on microwave door to provide secure grip for opening and closing. Needed when cracked or broken.
Microwave not heating? The magnetron generates the microwaves that heat food. Common repair for units that run but don't warm. DIY-friendly repair.
Replace magnetron. Took longer to remove and disassemble m/w than to replace part. Above range installation. M/w was heavy- be careful. Read more
Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.
We ordered the parts we needed & they came right away. My husband installed them the day they came. Voila! Perfect! Read more
Microwave not heating or humming loudly? The high-voltage diode converts AC to DC for the magnetron. Repair takes 30-45 minutes with basic tools.
I replaced both the Magnetron and the high voltage diode. I now have a fully functional microwave. I received the parts on time and the quality was good. I would use appliance parts pro's again. Read more
Fix a wobbling or scraping microwave tray with a new turntable roller ring. Supports the glass tray for smooth rotation and even heating. Easy DIY fix.
The Fuse is an OEM part for GE microwaves. It serves as a safety device that protects the microwave by breaking the circuit if there is a power surge or electrical fault. This helps prevent damage to the microwave's components and ensures safe operation.
You should replace the fuse if it becomes blown or damaged. Causes of a bad fuse can include power surges, electrical faults, or issues within the microwave such as overheating. These factors can cause the fuse to blow, rendering the microwave inoperable.
Symptoms of a bad fuse include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Secures microwave components and mounting brackets. Replace this hardware assembly if screws are stripped, bolts are missing, or fasteners are damaged.
Removed the dozen or so screws on the microwave cabinet housing (top & 2 sides). Removed the 2 screws from the assembly holder hut bracket and replaced the assembly holder nut with a new one and re-installed the 2 screws. Re-installed the dozen or so screws on the cabinet. Finally re-installed the microwave with the 2 new 3-7/8'" long bolts thru the kitchen cabinet. Read more
The Door Key is an OEM part for GE microwaves. It is responsible for securely holding the microwave door closed during operation. A sturdy and reliable latching mechanism is important for safety and to prevent leaks of electromagnetic radiation.
Causes of a bad latch can include worn or damaged parts due to normal wear and tear over time. The mechanism undergoes a lot of opening and closing stress with repeated use. Impacts from improper handling can also damage latch components.
Symptoms of a bad latch include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered a new part and was able to install it easily. Read more