Ed2shexxboo Parts

8 x 1/12

This air duct channels airflow inside the appliance to help maintain proper venting and efficient operation. Replacing a damaged duct restores correct air pathing and helps prevent airflow restrictions. What it does:

• Directs air from the blower/heater area to the exhaust or drum opening
• Helps maintain consistent airflow for proper drying/heating performance
• Prevents hot spots and reduces risk of overheating caused by blocked or broken ducts
• Can reduce unusual noise caused by loose or damaged ductwork

• One air duct

• Inspect surrounding seals and fasteners; replace any damaged clips or gaskets for a secure fit
• Disconnect power (unplug appliance or switch off breaker) before starting work
• Handle plastic duct pieces carefully to avoid cracks; confirm correct orientation before fastening

This is a replacement compressor for refrigerators manufactured by Whirlpool. The compressor plays a critical role in the refrigerator's ability to properly cool and preserve food. It adds heat and pressure to the system, as well as circulating refrigerant through the system. As the heart of the refrigerator, when the compressor fails, the appliance will no longer cool properly. Refrigerator compressors are subject to a great deal of wear and tear, voltage surges, heat, and other factors. Air, moisture, or dust entering the compressor can also cause damage. Signs the compressor may need to be replaced include frequent cycling, infrequent cycling, and failure to cool.This is a genuine OEM replacement part, and it is sold individually. It is compatible with Whirlpool, Amana, Admiral, Jenn-Air, KitchenAid, Roper, and Kenmore branded refrigerators.

This factory fastener secures panels, brackets, or internal components in your appliance. Replacing a missing or damaged screw restores a tight fit, reduces rattles, and keeps assemblies properly aligned for dependable operation.

• Fastens sheet-metal panels, braces, and trim to the cabinet/frame
• Helps maintain alignment and structural integrity of assemblies
• Can reduce vibration noises and looseness caused by missing/stripped hardware
• Replace if the head is rounded, threads are worn, or the screw is corroded

• Disconnect power; for gas or water appliances, also shut off the supply
• Match location and start threads by hand to avoid cross-threading
• Use the correct driver size; tighten snugly without overtightening

Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.

The Broken Tab Ice Door Kit is an OEM part for Whirlpool refrigerators. This kit includes all the necessary components to repair or replace the ice door chute, which is responsible for dispensing ice from the ice maker to the ice bucket or directly to the user. The ice door chute must seal properly to prevent warm air from entering the freezer compartment, which can lead to frost and ice buildup.

Symptoms of a failing or broken ice door chute include:

• Ice accumulating around the ice dispenser chute
• Frost buildup in the freezer compartment
• Warm air leaking into the freezer, causing temperature fluctuations
• The ice door not closing properly or becoming stuck
• Unusual noises from the ice dispenser area

Causes of a broken ice door chute can include regular wear and tear, physical damage from mishandling or excessive force, or deterioration of the sealing components over time.

This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore. 

This kit is used if the ice door mounting tabs are broken off of the dispenser wall. If your model number uses this ice door WP2180353 or this ice door kit W10823377 this kit can be used.

The Alumilastic Cement is an OEM part for Whirlpool appliances, typically used in refrigerators and freezers. It serves as a thermal mastic compound, designed to provide a secure and heat-conductive bond between various components, such as evaporator coils and the interior walls of the appliance. 

Causes of a bad alumilastic cement can include drying out, cracking, or losing its adhesive properties over time. This can occur due to age, exposure to temperature fluctuations, or improper application. When the cement fails, it can lead to poor thermal conductivity and decreased cooling efficiency.

Symptoms of a bad alumilastic cement include:

• Reduced cooling performance
• Unusual noises from the cooling system
• Components becoming loose or detaching
• Increased energy consumption

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.