Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces broken or stretched dishwasher door springs. Restores proper tension so door opens and closes smoothly without dropping or loud noise.
Found the end of the right-side Door Spring that connects to the Door Cable broke off and the plastic end of the Door Cable that connects to the Door Spring was also broken off. Ordered a replacement Door Spring 154579101 and Door Cable 154578801 from AppliancePartsPros.com When the parts arrived a few days later, I watched the video on the AppliancePartsPros. Following the instructions on the video, it took about 15 minutes to replace the Door Spring and Door Cable. Note: I did not have... Read more
The Vent Blower Assembly is an OEM part for Frigidaire dishwashers. It is designed to help ventilate the dishwasher by expelling hot, moist air from the interior after the washing cycle.
You should replace the vent blower assembly if it becomes faulty. Causes of a bad vent blower assembly can include regular wear and tear, blockages from debris, or electrical issues. A malfunctioning vent blower can lead to poor drying performance and excessive moisture inside the dishwasher.
Symptoms of a bad vent blower assembly include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I had an appliance repair guy come and he told me it was possibly the vent assembly but if changing it didn't fix the problem it would be the control board next. He felt it was not worth the money to repair because he would have to disconnect everything just to get to the vent on the right rear top of the dishwasher. When i took the DW out thinking i had to buy a new one i saw this part was stuck open and covered in limescale deposits and grime.I ordered the part from appliance pros and payed... Read more
Brass nut that secures the heating element to the dishwasher tub. Replace if cracked, split, or causing leaks around the element mounting area.
Heating element nut had cracked causing a leak. Rather than run right out and buy a new one, I found the cracked nut and replaced it for about 11.00. Thank you Appliance pros. Quick shipping. Read more
Dishwasher not filling with water or won't stop filling? The water inlet valve controls water flow into your dishwasher. DIY-friendly replacement part.
Installed part provided Read more
A rubber mounting grommet that cushions and positions components to reduce vibration and wear, helping parts seat securely for reliable operation. What it does:
Replaced the upper spray arm tube with a new one. Also replaced delivery tube grommet and the delivery tube gasket. Now everything works fine and no more leaks. Read more
Replace cracked or bent dishwasher door hinges. Mounts on left and right sides of the door frame to support the door weight and ensure smooth operation.
My husband took the door apart replaced hinges in less than 15 minutes. Very easy to do yourself rather then paying a lot of money for someone to come out to do it for you. I would have to say that the customer service was very helpful told me exactly what I needed. Read more
This tube delivers incoming water from the inlet valve to the wash system inside the dishwasher. It connects the water inlet to the tub or spray arm assembly to ensure proper water flow during fill cycles. Replace this feed tube if you notice leaks beneath the dishwasher, reduced water flow into the tub, or visible cracks and damage to the tube.
Rotating spray arm that distributes water across dishes during wash cycles. Replace if cracked, split, or ports are clogged to restore proper coverage.
After reading reviews, I went ahead and ordered the complete sprayer arm with the orbital sprayer and the bottom door gasket. It fixed the problem ! So I’m not sure which was needing replaced but I didn’t want to have to wait longer if I needed the other part so I replaced them all that could be causing the problem. The only problem with the whole experience is that 3 plastic pieces should not cost $180 !! Read more
If water remains in your dishwasher after draining or returns to the tub, the drain check valve may have failed. Easy 10-30 minute DIY repair.
After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed. Read more
Dishwasher won't fill with water? A faulty water level float switch prevents proper filling. This switch assembly typically takes 15 minutes to replace.
Replacing the inlet valve solved the problem. The old valve was somehow clogged with white sediment. I probably could have taken it off and cleaned it out if I'd known, but replacing the valve was much easier. Took about half an hour to repair. Video walk through was extremely helpful. Great to have a working dishwasher again! Read more
The Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It contains a touchpad and electronic controls that operate wash cycles and drying features. Causes of a faulty switch assembly can involve water exposure inside the door control area leading to circuitry corrosion over time. Symptoms of a bad switch assembly include:
This OEM Frigidaire replacement part is also compatible with dishwashers manufactured by Electrolux, Gibson, Kelvinator, and some Kenmore models.
Replace control/switch panel along with exterior push button panel. Read more
Seals the upper spray arm delivery tube connection in your dishwasher. Replace if water leaks from the spray arm mount or arm becomes loose. Verify fit.
Replacement water inlet hose for dishwashers. Connects water supply to the tub. Replace if cracked, leaking, or damaged by pests or wear.
Replaced hose Read more
Covers the gap beneath your dishwasher for a finished look. Replace if cracked, broken, or missing. Installs at base with screws (sold separately).
Easy job, I screwed the parts to the dishwasher Read more
Seals the rear of your dishwasher's circulation pump to prevent leaks. Replace if you notice water pooling or dripping from the motor area.
I first thought the leak came from the pump assembly rear o ring. I was wrong. The water was leaking from the pump. The pump assembly was shipped in 1 1/2 days with 2 more o rings. I lubed the o rings with dish soap, they slid in perfectly. reinstalled the clamp and screws and was ready to reinstall the dishwasher. Worked great. Next time I will buy the pump the first time. Buying the o rings separately adds $$. Read more
Noticeable wear, cracks, or deformation on the O-ring This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.