Gdt535pyv6fs Parts

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

The Configured User Interface Control Board is an OEM part for GE dishwashers. It is designed to provide communication and control of the dishwasher, allowing the selection and customization of settings and cycles. It provides a user-friendly interface, displaying essential information and options for washing.

A bad configured user interface control board can lead to issues such as unresponsive buttons, error codes, or a complete failure of the dishwasher to operate. Causes of a bad configured user interface control board can include electrical failures, wear and tear over time, or damage due to power surges or mishandling.

Symptoms of a bad configured user interface control board include:

• Unresponsive or non-functioning buttons on the control panel
• Error codes or error messages displayed on the user interface
• Inconsistent or incorrect readings of cycle settings or time remaining
• Complete failure of the dishwasher to start or operate

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This control box bottom is the lower housing piece that secures and protects the appliance control board and related components. It restores a stable mounting surface and helps keep electronics shielded from vibration and debris. What it does:

• Provides the lower half of the control box housing to support and protect the control board
• Keeps wiring and connectors routed and held in place to prevent strain
• Replaces cracked, broken or warped housing that can expose electronics
• Helps stop rattling or movement of the control assembly that can cause intermittent controls

• Control box bottom

• Power off and unplug the appliance before starting any repair
• Handle the control board and connectors carefully to avoid electrostatic or mechanical damage
• This part typically installs with screws or clips; retain fasteners and note their locations during disassembly
• Inspect and address the electronics before reassembly

A silicon-controlled rectifier (SCR) used on appliance control boards to regulate power to motors, igniters or other loads. Replacing a faulty SCR can restore proper power switching and steady operation of the driven component. What it does:

• Acts as a power-switching semiconductor in appliance electronic control circuits to allow current flow only when triggered.
• Enables controlled delivery of voltage/current to motors, igniters and similar loads on the control board.
• A failing SCR can cause symptoms such as no power to a motor or igniter, intermittent operation, or complete failure of the driven component.
• Match the SCR package and electrical ratings to the control board before replacing.

• Disconnect all power to the appliance before accessing control electronics to avoid shock or damage.
• Take electrostatic-discharge (ESD) precautions; handle the SCR by its body and avoid touching leads.
• Package orientation and electrical ratings on the control board and wiring before installation.

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

Left side roller cover.

The User Interface Housing is an OEM replacement part for GE dishwashers. Located at the front of the console, it houses the control panel responsible for cycle/option navigation.

The housing protects sensitive electronic components from water damage and physical impact. Its sturdy construction allows for responsive touch inputs without flex or play in the assembly. 

Symptoms of a bad user interface housing include:

• Warping or cracks exposing circuitry to damage
• Faulty sealing allowing moisture penetration
• Difficulty registering button presses from structural defects
• Ill-fitting installation negatively impacting usability

Causes can be repetitive openings allowing entry of dirt/moisture into critical areas and use over the years breaking down seals and weakening materials.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This floor plate is the OEM-style replacement that fits under the oven cavity to protect internal components and provide a stable cooking surface. Restores proper support and helps maintain even heat distribution in the lower oven area. What it does

• Covers and protects the oven's lower cavity from spills, drips, and falling debris
• Helps funnel heat and airflow for more consistent baking and roasting performance
• Prevents direct contact between food/drips and heating components
• Reduces corrosion and wear to inner oven parts caused by spills

• One floor plate as shown

• Designed to be installed in the lower oven cavity; for exact placement
• Remove power (unplug or shut off breaker) and allow the oven to cool before servicing
• Use appropriate gloves to avoid sharp edges; avoid forcing the part into place

This 8-button user interface control board replaces the front panel electronics that let you start and control appliance cycles. It restores button responsiveness and on-screen command input so the appliance accepts user selections reliably. What it does:

• Provides the front-panel electronics and button inputs for cycle selection and menu navigation
• Replaces worn, unresponsive, or intermittent front-panel controls
• Resolves symptoms like non-working buttons, no response when selecting cycles, or erratic control behavior
• Interfaces with the appliance's main control to send user commands

• One 8-button user interface control board as shown

• Disconnect power to the appliance before attempting service to avoid shock or damage
• Handle the board by its edges and avoid touching contacts or components
• Some disassembly of the control console or door panel may be required; keep screws and small parts organized

The Screw is an OEM part for GE dishwashers. This screw is designed for various applications, including securing and fastening components in your GE appliance.

A bad screw can result in issues such as loose or unstable components, improper functioning, or even potential damage to other parts. Causes of a bad screw can include wear and tear over time, improper installation, or exposure to extreme conditions.

Symptoms of a bad Screw include:

• Components becoming loose or detached
• Parts not securely fastened
• Unusual noises or vibrations during operation
• Visible signs of damage or wear on the screw

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This latch cam engages the door latch mechanism so the appliance door closes and stays secure during cycles. A worn or broken cam can prevent the door from latching or cause the door to feel loose. What it does

• Rotates with the latch to lock the door securely during operation
• Ensures the latch striker catches and holds the door closed
• Common symptom: door won't stay latched or appliance won't start
• Common symptom: door feels loose, noisy, or intermittently opens during cycles

• One latch cam

• Disconnect power before starting any repair to avoid shock or injury
• Inspect surrounding latch components and replace any visibly damaged parts
• Use basic hand tools; keep track of small fasteners and alignment during reassembly
• Test door operation several times after installation to ensure secure engagement

This door handle fastener secures a refrigerator/freezer door handle to the appliance, restoring stable grip and proper handle alignment. Small but essential for keeping the handle firmly attached during use. What it does:

• Secures the door handle to the door mounting post or bracket
• Stops handle wobble, shifting, or partial detachment under normal use
• Restores proper handle alignment for comfortable opening and closing
• Helps prevent further wear to handle mounts caused by a loose fastener

• One door handle fastener

• Typically installs from inside the handle area; handle removal may be required
• Use correct screwdriver or tool to avoid stripping the fastener head
• Work carefully around door edges and gasket to avoid damage

This white door handle assembly replaces a broken, cracked or loose refrigerator door handle to restore a secure grip and clean appearance. Fits compatible GE refrigerators and installs in place of the original handle assembly. What it does:

• Provides a secure, ergonomic grip for opening and closing the refrigerator door
• Replaces broken, cracked or loose handles that affect door operation or appearance
• Restores proper handle alignment so the door opens smoothly
• Helps prevent further damage from using a compromised handle

• Remove food and any items from the door; support the door while working to avoid strain or damage
• Use common hand tools (screwdriver, socket) to remove mounting screws and transfer any trim or mounting hardware as needed
• Keep original screws and clips unless the new assembly explicitly includes replacements

This inner door assembly replaces a damaged or worn inner panel to restore a secure, insulated door interface and proper sealing. It fits into the existing door frame to help resolve door rattling, poor closure, or visible inner-door damage. What it does:

• Replaces the appliance's inner door panel to restore structural integrity and improve sealing.
• Helps stop door rattling, unusual vibration, or gaps caused by a cracked or bent inner door.
• Restores the inner surface that supports door hardware and seals.
• Enables proper alignment for the outer door and latch operation when the inner panel is the cause of failure.

• One inner door assembly

• Disconnect power to the appliance before starting any repair.
• Handle door components carefully—sharp edges or glass may be present.
• Basic tools (screwdriver, socket) typically required; follow service manual for disassembly/reassembly steps.

Replacement control box top that restores the protective cover for the appliance control housing, keeping wiring and electronics enclosed for a cleaner appearance and safer operation. What it does:

• Covers and protects the control housing and internal wiring from dust, spills, and accidental contact
• Helps secure control components in place and maintain the appliance's factory appearance
• Commonly replaced when the original cover is cracked, broken, missing, or shows visible damage
• Can prevent loose wiring from catching or being accidentally disturbed

• One control box top

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Remove any screws or retainers securing the existing cover and lift off the old top; keep fasteners if reinstalling
• Align the replacement top and secure with the original fasteners; ensure wiring is routed and seated before closing

The Lower rack roller and stud assembly is an OEM part for GE dishwashers. It supports smooth movement of the lower dish rack in and out of the tub.

Causes of a bad roller and stud assembly can include wear from repeated extension/retraction of the rack. Mineral buildup may also impede smooth operation over time.

Symptoms of a bad roller and stud assembly include:

• Difficulty fully extending or retracting the lower dish rack  
• Noisy squeaking or grinding noises when moving the rack
• Rack that does not glide easily or gets stuck partially out

Replacing the roller and stud assembly with this genuine GE part restores convenient access to dishes on the lower rack. Its quality ball bearings and durable construction enhance usability cycle after cycle.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.