Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement door cable and spring kit for dishwashers. Installs on door hinge to provide proper tension and balance. Needed when cables break or springs wear out.
Replaced broken part. Read more
The Folding Tine Row Clip is an OEM part for GE dishwashers. It is located on the side of the dishwasher's lower rack and holds the folding tine row securely in position. It ensures that the folding tines, which can be adjusted to accommodate different dish sizes, remain stable during the wash cycle.
Causes of a faulty or damaged folding tine row clip can include regular use, wear and tear, or breakage. These factors can result in issues such as the folding tine row becoming loose or unstable, difficulty in adjusting the tines, or the tines not staying in the desired position.
Symptoms of a bad folding tine row clip may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I purchased new clip pieces and installed them. Read more
The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.
Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.
Symptoms of a bad door latch strike include:
Based on our research, the dishwasher latch was one of the most common causes for our model of dishwasher malfunctioning. We purchased this replacement unit, and thanks to the help provided via videos and diagrams, my wife and I were able to very easily install the new latch. While this replacement did not totally fix our problem, it was part of it. Shipping on the part was very quick, I ordered it on Friday night, and the latch arrived Saturday morning. Read more
Controls airflow in your dishwasher door. Replace if cracked or if you see leaking from the door vent area. Confirm fit with your model number.
Upon taking the door apart it looked like the leak was coming from the vent so I replaced the vent cap, vent seal and the transition piece. I did not have to change the seals. It took me a while to figure out how to get the door apart, but once I did, it was fairly straightforward. Read more
Connects to the middle rack to deliver water through the mid-level spray system. Replace if tabs are broken, assembly won't lock in place, or seals are worn.
Replaced part and fixed the dishwasher. Read more
If your dishwasher's bottom rack has broken or cracked tines, this folding tine row restores proper dish support. Simple snap-in repair, typically under 10 minutes.
Ordered parts for new back tines for the lower rack from AppliancePartsPros.com. Removed old damaged tines and replaced them with new ones. Very simple repair. Read more
Secures your dishwasher underneath the kitchen countertop. Replace if the bracket is cracked, broken, bent, or missing from installation.
Order parts from Appliance Parts Pros. Read more
The Fill Funnel Service Kit is an OEM replacement part for GE dishwashers. It contains the funnel assembly and seal/gasket used for the water inlet. Reliable filling is important for effective cleaning. Causes can be cracks, tears, or deformities developing in seals over extended use periods. Mineral buildup may also compromise sealing surfaces. Symptoms of a bad service kit include:
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Husband replaced the parts damaged. Read more
Replace broken or missing folding tines on your dishwasher's lower rack. This tine row restores proper dish spacing and rack functionality.
Creates a watertight seal around the dishwasher sump to prevent leaks. Replace if you notice water leaking underneath. Verify fit by model number.
Purchased your parts watched the awesome video on your site. Repair was complete within an hour the dishwasher is running as I am typing this. Thank you so much for the service you offer. Regards, Rich Read more
Replacement drain hose for dishwashers. Carries wastewater from the unit to your household drain. Needed when original hose is cracked, leaking, or damaged.
Replaced drain line Read more
Fix a cracked or broken dishwasher handle that won't open properly. Requires removing front panel with torx and hex screws. Video guide available.
Reviewed repair via youtube. Disconnected the dishwasher power and water. Removed dishwasher from under the cabinet. Removed and disassembled the door and then made the repair. The last step reinstalled the door and dishwasher. Read more
Fits over the vent on your dishwasher door. Replace if cracked, broken, or loose. Allows steam to escape while protecting interior components.
This wiring harness connects your dishwasher's electronic control board to other components. It carries electrical signals between the control board and various sensors, pumps, and motors. Replace it if your dishwasher displays error codes, doesn't respond to button presses, or operates erratically.
Replaced the circuit board and the associated wiring harness. Read more
The Flood Switch is an OEM part for GE dishwashers. This critical component detects and prevents potential overflows by monitoring water levels within the dishwasher. When excessive water is detected, the flood switch signals the dishwasher to shut off water flow, preventing leaks and potential water damage.
Causes of a bad flood switch can include electrical failures, physical damage from debris, or wear and tear from repeated use. If the flood switch malfunctions, it may not properly detect water levels, leading to possible overflows or improper operation of the dishwasher.
Symptoms of a bad flood switch include:
Fix went fine, had to pull the dishwasher out to replace flood switch control board was very easy to replace, and fixed the problem. Read more
The Ultra fine filter kit is an OEM replacement part for GE dishwashers. As part of the rinse cycle, this filter helps further remove food debris from dishes before the dry cycle begins, allowing for sparkling clean results. The ultra-fine filter is designed with a close-nit mesh that is able to capture microscopic food particles and sediment. This prevents debris from re-depositing onto dishes or interfering with proper drying. Symptoms of a bad ultra-fine filter include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Initially I replaced the heating element since it appeared compromised. When that failed to fix the problem I went to your site and reviewed the other options and found the exact answer I needed. I replaced the flood switch assembly and ultra fine filter since mine was needed replacing. Problem solved!! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.