Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Freezer Evaporator Fan Motor and Felt Seal is an OEM part for GE refrigerators. This component is essential for circulating cold air throughout the freezer compartment, ensuring even cooling and preventing frost buildup. The felt seal helps to reduce vibrations and noise from the motor, enhancing the overall performance and quiet operation of the freezer.
Causes of a bad fan motor can include electrical issues, wear and tear from regular use, or physical damage. A malfunctioning fan motor can lead to inadequate cooling and temperature inconsistencies in the freezer.
Symptoms of a bad freezer evaporator fan motor and felt seal include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced freezer evaporator fan. The AppliancePartsPros.com video. Very helpful. The fan located in the freezer compartment you must remove the bottom drawer front and the drawers. The fan is located at back wall of the freezer compartment. Be carful removing fan cover. I broke the tab on the bottom and had to glue it. From there I unplugged the fan and remove the fan from the tabs on the right side first then slide it out. Install the new fan in reverse. The fan at the bottom of the... Read more
Seals around the evaporator motor in your refrigerator. Replace if cracked, damaged, or missing to maintain proper airflow and insulation in the evaporator.
Replaced fan motor in fresh food section, easiest repair I have ever made, took longer to get shelves out than replacing motor.. Read more
Refrigerator not cooling properly? A worn fan gasket disrupts airflow and temperature control. This assembly seals the circulation fan compartment.
Not so easy! The fan is similar to a computer cooling fan but has a rounded housing that slips over a round condenser coil. It slides into a shoe bracket at the bottom. It should slide out towards the back of the refrig by approx 1/2 inch then pull up and out. But the fan shroud wraps around the condenser coil causing you not to be able to slide. You must first take a screw out that supports the condenser coil at the opposite end of the condenser "not easy to get to" then push the coil away... Read more
The Refrigerator Evaporator Cover is an OEM replacement part for GE refrigerators. This insulation shield covers evaporator coils to distribute airflow. Causes involve punctures allowing air and moisture bypass, dislodged mounting flanges detaching insulation protection, or deterioration compromising material integrity over years of use. Failures present as:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new evaporator fan, heater coil and fresh food fan. Troubleshooting on youtube, ordered the parts watched the video on how to remove old parts and then how to replace them. Called 3 different repair companies, seems no one will work on this GE French door fridge. I am sure someone with experience could change everything quicker! However, my daughter and I got the job done and the fridge is working great again! The videos on the parts ordering were the biggest help, straightforward and... Read more
Detachable ice storage bin with hinged door for refrigerator ice dispensers. Replace if cracked, broken, or missing to restore ice containment and access.
Ordered 2 door shelves from Appliance Parts Pros for my GE Profile refrigerator and was pleasantly surprised to receive the parts in two days. Parts were well packaged and fit perfectly. Was very helpful to be able to view my models parts diagram on-line to assure I was buying the right part. Read more
Cam kit for refrigerator door hinges. Includes black and white cams that install at door bottom and hinge. Replace when cracked, broken, or worn.
Used floor jack to lift and secure door, left upper hinge point in place, removed lower hinge support, removed old cams and installed new ones and lubricated, secured and adjusted hinge . Read more
Replace the dispenser actuator paddle on your refrigerator when it becomes cracked, broken, stuck, or won't release properly. Installs at the front.
Buy the Cover Pad Assembly, reviewed youtube for a video, and following the instructions. Easy Read more
Fix a stuck or hard-to-open freezer drawer with this lower drawer gear. Replaces broken teeth causing drawer issues. Easy DIY repair, no tools needed.
Replace the gear and re-incert the freezer drawer. Read more
The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door.
Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.
Symptoms of a bad Set Screw include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered the replacement handle parts based on the model number. Read more
The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.
Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.
Symptoms of a compromised screw placement include:
This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
The Connector Gear Pinion is an OEM part for GE refrigerators. It is integral to the smooth operation of the freezer drawer, connecting the rail system and allowing the drawer to open and close effortlessly.
Causes of a bad connector gear pinion can include general wear and tear over time, excessive force applied during operation, or debris causing obstructions within the mechanism.
Symptoms of a bad Connector Gear Pinion include:
Installed new connector gear pinion Read more
Fixes slow water dispensing or small ice cubes in your refrigerator. The filter manifold connects your water filter to the dispenser and ice maker.
You need to pull the refrigerator out and disconnect the two water lines. Quick connect is very easy and not even one drop of water leaked. Make note of which water line connects where. The hose with the red mark connected to the input from the wall. The line with the blue mark connected to the line going back into the refrigerator. Open the refrigerator and remove the rear Phillips head screw from the filter holder. With a flathead screwdriver carefully pry the white manifold bracket so it... Read more
Lower drawer gear for bottom-mount refrigerators. Installs on the left side of the freezer drawer assembly. Replace if cracked, broken, or damaged.
Replaced the fan with the part ordered. Required the removal of a shelf and the lower drawer to remove access plate. Read more
Folding center strip that seals the gap between French doors. Replace if worn, damaged, or causing air leaks and condensation. Verify fit by model number.
Replaced with a new flapper. Read more
Water filter bypass plug allows your refrigerator to operate without a filter by creating direct water flow. Replace if damaged or worn. Confirm fit with your model.
Placed plug in position in refrigerator. Read more
Secures the crossbar in your refrigerator's interior for stable shelving support. Replace if pin is broken, missing, or worn to restore proper fit.