Need Help?
Call
Plastic frame that supports the glass shelf above vegetable crisper drawers. Replace if cracked, broken, or drawer rails are split or damaged.
Order new parts to replace the broken ones. Read more
Seals the gap between French doors and refrigerator body to maintain temperature. Replace if doors won't seal or air leaks occur. Confirm fit with model.
Followed general instructions on APP video I found on YouTube for similar GE refrigerator. I soaked the gaskets in warm bath water first which may or may not have been required as I let the gaskets sit out flat in a warm house for a week first and they were about as straight as they would get. Installing the gasket in the groove was not very difficult assuming you have strong fingers. Entire process takes more time than you think as the gasket needs to be heated with a hair dryer and stretched... Read more
The Defrost Heater Assembly is an OEM replacement part for GE refrigerators. It contains the heating element responsible for maintaining optimal temperatures within the refrigerator. As a crucial component, the heater works to keep stored food safely cooled and prevent freezing.
Causes of a bad defrost heater can include gradual wear over time, mineral buildup reducing heat transfer efficiency, and physical damage.
Symptoms of failure are:
This GE OEM part is also compatible with Hotpoint, RCA, and Kenmore models for simple cross-referencing.
Left-hand drawer slide rail for refrigerator crisper and deli drawers. Replace this support track when cracked, broken, or split from wear and tear.
Went online and looked for a parts dealer using the refrigerator model number. Read more
Refrigerator not cooling or display panel blank? The main control board regulates temperature, defrost cycles, and compressor operation. DIY repair in 1 hour.
Ordered a new mother board install was easy and everything is working great. Web site was easy to navigate . Part came in one day.Thank you Read more
Fridge warm but freezer cold? Your evaporator fan motor likely failed. Fixes air circulation issues. Moderate DIY repair with basic tools.
Determined that the evaporator fan in the freezer compartment was not running properly and making noise. Ordered a replacement evaporator fan and blade. Removed the freezer door, baskets, and side rails. Removed the back panel of the freezer compartment by unscrewing and disconnecting the power cable connected to the fan. Removed fan blade. Turned over the panel and removed the back fan bracket and fan. Installed replacement fan, back fan bracket, and fan blade. The grommets ordered were the... Read more
Ice maker not producing ice or won't dispense cubes? This complete ice maker assembly replaces failed units. DIY-friendly install in under 10 minutes.
I found that the Ice Maker in my GE side by side made ice but would not kick out the ice when it had formed, the heating element or the switch that controls it didn't work. I ordered a new ice maker switched it out took less than 3 minutes. The cord was very stiff and just long enough but I got it to connect and in 35-40 minutes I had fresh ICE!! Read more
The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.
Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.
Symptoms of a bad Temperature Sensor Seal include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This fridge has had a problem of ice building up around evaporator coil in fresh food side. Wife (she HATES this thing) says it's done this from day one; 10 years. GE guy says all these models do this and there's no fix for it, so we have clean out the ice periodically... Like the 1940s pre auto defrost. Now with the issue of FF side temp too highi assumed the ice had built up around FF evaporator coil preventing proper cooling, but AppliancePartsPros.com suggested the FF temp thermistor may... Read more
Ice maker not making ice or water valve leaking? This refrigerator water inlet valve controls water flow to your ice maker and dispenser. DIY repair.
Replaced the Valve and Tube Assembly. Now my ice maker is making ice as before. Read more
Directs defrost water from the evaporator to the drain pan below your refrigerator. Replace if cracked, damaged, or clogged to prevent water pooling.
Pulled down the existing drain tube and installed new one. Tight area so it requires two hands to push up and attach the new tube. The short rubber tubing attached to the new drain tube has to fit snug onto the plastic tube connection that hangs down. Replacing the water dispenser tray is simple and no explanation needed, Read more
Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.
I replaced the lever asm. and spring Read more
Protective grille cover that mounts over the temperature sensor in your refrigerator. Replace if cracked, broken, or missing to properly shield the sensor.
Common theme on the blogs was thermistors and or defrost heater/thermostat. Ran self-diagnostics which turned on defrost heater which was fine. All five thermistors indicated ok on diagnostic also, but I read more than one time "replace the thermistors no matter what if your FF section isn't cooling". So I ordered all five thermistors and defrost limiter thermostat. Received all in 48 hours (great shipping service), took me about three hours to replace all thermistors and thermostat just as... Read more
This kit includes left and right slide rail holders that secure the drawer slide rails inside the freezer compartment of the refrigerator. The holders keep the drawer gliding smoothly on its tracks when opening and closing. Replace this kit if the freezer drawer is sagging, sticking, or falling off track due to broken or worn slide rail holders.
Replaced both tracks. Read more
Set screw secures refrigerator door handles in place. Replace if lost, stripped, or missing after repairs. Requires hex wrench for installation.
I ordered my parts. It was a breeze thanks to appliancepartspros.com. I received the parts the next day. Installed them myself. Read more
Creates an airtight seal around your refrigerator door. Replace when worn to maintain stable temps, reduce frost buildup, and improve energy efficiency.
Rubber grommet that mounts the evaporator or condenser fan motor to its bracket. Replace when worn, cracked, or missing to reduce vibration and noise.
Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.