Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This hinge is for painted door only. For stainless steel door use WP8272822.
This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up... Read more
This red indicator light lens covers the control-panel light opening. It restores a clean, finished look and keeps the status light easy to see while helping protect the opening from debris and accidental contact.
Replaced the burner switch. While I was in there, I noticed that the indicator light holder had broken off the lens (poor setup) and that one of the wires to the socket was too short so I added a short segment to the wire with insulated crimp connectors and all is well! Read more
Color: Biscuit. Right hand side. For left hand use WP8523173
Primarily, removed oven door. Be cognizant of how you disassembled ... Very important when you reassemble ! By-the-way,this was ALL PRECIPITATED by wanting to clean the interior side of oven door glass after my wife self-cleaned the oven! How in-the-world did grease get there in the first place!? While disassembling door, after removing from body of oven , the right side trim piece (being Very brittle) Broke ! Than, due to the same reason, the left side trim piece Broke ! Yippee ! That will... Read more
Color: Biscuit. Left hand side. For right hand use WP8523167
This machine-thread screw secures brackets, panels, and trim inside your appliance. Replacing a missing or stripped fastener restores a tight fit, reduces rattles, and keeps assemblies properly aligned. What it does:
This front leveling leg adjusts the height at the front of your appliance to keep it level and steady. Replacing a worn or missing foot helps eliminate rocking, protect floors, and make fine leveling adjustments simple.
Discover that drawer glide and one of the oven front legs were broken, found the parts at ApliancePartsPros and got my range as good as new now! Read more
Surface unit indicactor light.
Replaced part Read more
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a... Read more
Color: White. For black order WPW10202217. For almond order 8522446. If your unable to use your old mounting screws order WP3196164.
The parts arrived in short time. Had to go to YouTube to learn how to get the door off. My range is about 2004 model. The YouTube video I found did not represent my installation but gave me enough information to remove the clip so the hinge could come free. Installing the handle was difficult to impossible to get the attaching screw in. I finally had to drill out the screw receptacle a bit to where I could get the screw in. I was afraid I would break the plastic the screw goes into. ... Read more
Color: Biscuit.
The hardest part of this repair was a) realizing that the easiest way to clean the oven door pieces is to remove the whole door and b) figuring out how to put the oven door back on. Doing (b) is infinitely easier if you stick two allen wrenches into the holes in the door hinge, but these holes ONLY appear when the door is fully open. Prop the hinges open BEFORE you remove the door. As many posters online will tell you, it is easy to remove the oven door but hard to put it back on. It... Read more
Color: Black. For biscuit order 98008169. For white order WP98008544.
Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises. Read more
Color: White. For biscuit use WP8522567, for black use WP8522566.
I pulled one of the knobs off the range, found the pars # and called AppliancePartsPros.com.I talked to the rep and made the order that afternoon.one day and a half later, the knob was in my mail box.Talk about service! Thank you AppliancePartsPros.com Read more
Color: White.
I had to place pins in each door lack to keep the door open. Took the door off and I had to take it completely apart. It was a little tricky putting it back together. Read more
Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more
Drawer support roller kit. Installation instructions included.
Found the parts on Appliance pros (love the website navigation); ordered on a Sunday afternoon and they were delivered on Tuesday afternoon. I had the drawer repaired within 15 minutes of Fed Ex delivering the package. No tools required other than my fingers! The original part was riveted to the drawer, these replacements are bolts with nuts and lock washers. Makes me wonder why this was not the original design. The riveted design NEVER seems to hold up to consumer use. Why do it on an... Read more
This replacement terminal block cover encloses the appliance's incoming power connections. It protects the wire terminals from accidental contact and debris, restoring a safe, finished connection area when the original cover is damaged or missing. What it does: