Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Dispenser Drip Tray is an OEM part for GE refrigerators. It serves as a catchment area for any drips or spills that may occur during the dispensing process. It helps prevent water or ice from dripping onto the floor or making a mess on the front of the refrigerator. For white order WR17X11654.
Causes of a faulty or damaged dispenser drip tray can include regular use, accumulation of debris, or cracks. These factors can result in issues such as water or ice leaking onto the floor, an unsightly appearance, or difficulties in cleaning and maintenance.
Symptoms of a bad dispenser drip tray may include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Watched your videos and easily replaced the solenoid, spring, flapper etc. The only reason it took me as long as it did is I have a GE monogram side-by-side in cabinet refrigerator. It is stainless steel and required me to take off all of the stainless steel skin on the freezer side door. While this was not that difficult it was time-consuming. Read more
The Auger Nut is a genuine OEM component for GE refrigerators. Located within the icemaker assembly, this nut secures the auger shaft that transports ice from the molding trays to the ice bin. Symptoms of a bad auger nut include:
Causes can include wear from the continuous rotational movement of each harvest cycle. Over time, the threading may become stripped or warped from repeated heating/cooling. This genuine GE OEM replacement part is also compatible with Profile, Monogram, and some Kenmore models.
I looked for a site that sold replacement parts for my make of GE refrigerator. I found AppliancePartsPros, and was very surprised at how organized it was. By entering the model number of my refrigerator, I was shown a set of (approximately) 8 general parts diagrams for my refrigerator. I chose the ice making/dispensing diagram. I matched the part that shattered (from use) to what was on the diagram. What I didn't know was how to install the part. I saw references by other customer comments to... Read more
The Drawer Cover is an OEM replacement part for select GE refrigerator vegetable and deli drawers. It protects stored contents from dehydration, contaminants and prolonged illumination while keeping the drawers light-sealed. Proper drawer insulation optimizes food storage conditions. Causes of a bad drawer cover can include cracks and breaks from repeated drawer opening/closing stresses over time. Exposure to produce acids and moisture accelerates degradation of plastic sealing surfaces. Symptoms include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerators.
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more
The GE Door Light Switch is an OEM Replacement Part that serves as the Freezer Door Fan and Light Switch. The switch is made from metal, wiring, and plastic. It plays an essential role in energy conservation by turning off the light when the refrigerator or freezer door is closed
Over time, the door light switch can wear out or fail due to frequent use, exposure to moisture, or electrical issues. When this happens, the interior light may not function correctly, which can hinder visibility inside the refrigerator.
Symptoms of a bad door light switch may include:
This switch is compatible with select GE and Hotpoint models.
Pop out the old switches with a putty knife pressing down on the tab, grabbed with pliers to pull out, disconnect the wires and connect new switches, pressing back in place. Read more
The Door Stop is an OEM component for GE refrigerator models. It is a small component located at the base of the refrigerator door that stops the door from opening past 90 degrees.
Symptoms of a bad door stop include:
Causes of a bad door stop include cracking or breaking of the plastic material due to impact or excess force on the door over its lifespan. Small flaws present during manufacturing could also lead to premature wear. With its compact design and durable plastic, the door stop safely limits door movement.
This OEM GE part is also compatible with some Kenmore refrigerator models.
The fix involved removing the two bolts holding the broken door stop and bolting in place the new stop. Unless you take the door off, you have to work by feel due to the position of the door stop and the bolts holding the stop in place. A little patience is all that's required. A flip lock designed to keep kids out of cupboards is now in place so the damage won't reoccur. But if it does, its a quick, easy and inexpensive fix. Read more
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more
The Crisper Pan Glass Cover is an OEM replacement part specific to GE refrigerators. It provides a clear see-through storage surface for fruits and veggies inside the crisper drawers.
Causes of a bad crisper pan glass cover include cracks or chips in the glass from sharp produce, impact damage, or warping from prolonged moisture exposure.
Symptoms of a damaged crisper pan glass cover include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
This story is somewhat unique, on Friday 5/23/14 I was cleaning the frig, when I broke the glass shelf. I went online to purchase a new glass shelf. Parts Pro said they would process my order if confirmed by 4:00 pm. and would ship it same day. I placed the order, and to my amasement the new shelf arrived 22 hours later, yes I said 22 hours. my hat is off to the Parts Pro. Thank you for such fast service, you now have a customer singing your praise as well as life long customer. Read more
The Crisper Pan Handle is an OEM replacement part specific to GE bottom-mount refrigerators. It attaches to crisper drawers located in the refrigerator compartment. These drawers are designed to optimize the storage of fruits and vegetables in adjustable humidity conditions. The handle measures about 16 inches wide by 2 inches high by 2 inches deep. Causes of a bad crisper pan handle include cracked or broken plastic, detached mounting from normal use, or worn-out connector pins. Symptoms of a bad crisper pan handle consist of:
This OEM GE replacement part is compatible with bottom freezer models produced under GE, Hotpoint, RCA, and some Kenmore brands.
Ordered new parts Read more
The Handle is an OEM replacement part for GE Refrigerators. It allows for convenient access and opening of the refrigerator or freezer door. The handle is designed to withstand frequent use and open and close smoothly without issue.
Symptoms of a bad Handle include:
Causes of a bad Handle can be regular wear and tear over several years of use, Handle damage from being pulled too forcefully, or impact damage from moving or transporting the Refrigerator improperly.
This Genuine OEM GE replacement Handle is also compatible with some Hotpoint, RCA and select Kenmore refrigerators.
I ordered the parts which was easy to order through the internet and received them in a matter of days. I replaced them myself following the video instructions which were easy and simple to understand. Read more
The Compressor Inverter Board is an OEM part for GE refrigerators. It controls the operation of the compressor, adjusting its speed to optimize cooling efficiency and energy consumption. This component is crucial for maintaining consistent temperatures inside the refrigerator and ensuring smooth, reliable performance.
Causes of a bad compressor inverter board can include electrical surges, overheating, or component failure due to wear and tear. When the inverter board malfunctions, it can lead to inadequate cooling and increased energy usage.
Symptoms of a bad Compressor Inverter Board include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Took out the old part and replaced it with the new part. Now all is working. Thank you so much. Read more
The Fresh Food Lever Assembly is an OEM part for GE refrigerators. It plays a crucial role in the operation of the refrigerator, enabling the smooth adjustment of settings within the fresh food compartment. This lever assembly is responsible for the user's ability to fine-tune the temperature and humidity levels, ensuring that the food stored inside remains fresh and well-preserved. For the same part in white, purchase WR11X10007. Over time, the lever assembly may become worn or damaged due to regular use, accidental impacts, or environmental factors such as extreme temperatures or humidity. Symptoms of a bad Fresh Food Lever Assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more
The Freezer Door Gasket is an OEM replacement part for GE refrigerators. It creates a tight seal around the perimeter of the freezer door frame.
Symptoms of a faulty gasket include:
Causes stem from the breakdown of material over extended exposure to extreme freezer temperatures and impacts from regular door operation.
This gasket is also compatible with GE, Hotpoint, and select Kenmore refrigerators.
Ordered replacement seals for both freezer and refrigerator sides. Followed directions that I had found on YouTube. The installation in a nut shell is warm the seals in a bathtub with very hot water for at least 2-3hrs then place the seals. Then warm the seals with a hair dryer as needed. After getting the seals out of the hot bath the installation took all of 20-25 minutes for both seals. Read more
The Door Bin is an OEM part for GE refrigerators. It is a convenient storage compartment located on the interior of the refrigerator door, designed to hold and organize smaller items such as condiments, jars, or beverages.
Symptoms of a faulty door bin:
Causes of a bad door bin can include physical damage from impact or excessive force, general wear and tear over time, or issues with the mounting brackets or support mechanisms.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
This repair was easy, just missing some door parts and a quick water filter change. Getting the right parts quickly made it all worthwhile! Thanks AppliancePartsPros.com!! Read more
The cold water reservoir is an OEM replacement part for GE refrigerators. It serves a dual purpose, holding the supply of cold water needed for both the ice maker and water dispensing functions. This ensures that each ice cube is formed from chilled water and that cold water is always ready to be dispensed. Causes of a bad reservoir can include cracks, fractures, or leaks developing in the plastic over time due to repeated filling and draining. Mineral deposits or contamination of the water supply can also compromise performance. Symptoms of an issue include:
I replaced the supply line to the fridge - no change in taste. I replaced the MWF manifold and tubes, the water inlet valve and the water storage line. That did it, good tasting water again! The ice still has a bad taste, so I'll replace the supply tube from the valve to the ice maker. Overall, replacing these parts was easy and the videos from Appliance Parts Pros helped. Read more
The Fresh Food Door Gasket is an OEM part for GE refrigerators. This gasket creates a seal around the refrigerator's fresh food compartment door, ensuring that cool air remains inside and warm air stays out.
Causes of a bad gasket can include wear and tear from frequent use, physical damage from cleaning or moving the refrigerator, or deterioration over time due to exposure to varying temperatures and moisture.
Symptoms of a bad Fresh Food Door Gasket include:
We replaced both the fresh food door and freezer door gaskets. Old gaskets must have lost their magnetic abilities. Read more
The Rear Refrigerator Wheel is an OEM replacement part for GE refrigerators. This wheel is attached to the bottom rear of the refrigerator, facilitating easy movement of the appliance for cleaning, maintenance, or repositioning. It is designed to support the weight of the refrigerator while ensuring smooth and stable mobility. Symptoms of a bad Rear Refrigerator Wheel include:
Causes for a malfunctioning Rear Refrigerator Wheel can include wear and tear from regular movement, damage due to excessive weight or impact, or issues with the axle or mounting hardware that secure the wheel in place.
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more