Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Gss20iembww Serial Parts

Best Seller
Refrigerator Dispenser Light Bulb
Genuine Ge part
By: Ge
Part Number: WR01X37886

Illuminates water and ice dispenser area for visibility in low light. Replace when bulb burns out or dispenser area stays dark. Confirm fit with model.

Do-It-Yourself Stories from Customers like You No lights in refrigerator   Lance B. • League City , TX • November 06, 2020

We bought a new house that has a 15 year old GE Monogram built in fridge. The home warranty people sent two guys out saying it was nearly impossible to repair the fridge and they both suggested buying a completely new freezer door for the fridge and of course the warranty company said it was preexisting and we weren't covered. Shocker. I have lighting in the freezer but not the fridge. I purchased a door switch and replaced the old one but that didn't do the trick. So i purchased a 2 amp fuse... Read more

More
$26.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Ice Dispenser Auger Drive Coupler
Genuine Ge part
By: Ge
Part Number: WR02X11941

Ice won't dispense or auger spins freely? The drive coupler connects the motor to the auger. Moderately easy DIY repair with pliers and patience.

Do-It-Yourself Stories from Customers like You Ice (broken seal) fizzer light out due to ice then auger motor auger coupler and solenoid cube failure   Damon B. • Tumwater , WA • December 19, 2015

This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more

More
$13.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Evaporator Fan Blade
Genuine Ge part
By: Ge
Part Number: WR60X10205

Freezer fan loud or not spinning? This evaporator fan blade circulates cold air over the coils. DIY-friendly repair with our video guide.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Noisy fan   Robert M. W. • Palmetto , FL • October 29, 2016

I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble. Replaced the motor and fan and now it runs like a new unit. Read more

More
$21.36

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Rear Wheel
Genuine Ge part
By: Ge
Part Number: WR02X10695

Replacement rear wheel for refrigerators. Mounts to the bottom rear frame to enable smooth rolling for cleaning and repositioning. Order if cracked or missing.

Do-It-Yourself Stories from Customers like You GE refrigerator front and rear wheels. The rubber shell on the wheels had cracked and peeled off.   Carl C. • London , OH • August 18, 2023

The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more

More
$14.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Compressor Start Relay
Genuine Ge part
By: Ge
Part Number: WR07X10057

Refrigerator won't cool and compressor won't run? A faulty start relay prevents the compressor from starting. Moderate DIY repair, 30-45 minutes.

Do-It-Yourself Stories from Customers like You Refrigerator not cold everything is running except the compressor.   George F. • Perkasie , PA • January 09, 2022

Check compressor with my Hotwire kit I made when I worked for GE. When removing the compressor relay it broke in pieces. Ordered and replaced new relay, overload & run capacitor. Still did not work. Check if there’s power to compressor and found no voltage. Took control board out and found a component burnt. Ordered and replaced control board. Everything is back to normal. Love your service. Parts was supposed to come in 3-5 days but came next day instead. I am very very impressed and grateful.... Read more

More
$72.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Light Bulb Socket
Genuine Ge part
By: Ge
Part Number: WR02X10591

Refrigerator light not working? This light bulb socket holds the bulb securely and provides electrical connection. Easy DIY repair with video guide.

Do-It-Yourself Stories from Customers like You Evaporator fan making noise/changing speed; freezer light socket bad   Paul S. • Albany , OH • November 26, 2016

Had some confusion of what part I needed, needed the one with the motor and thermostat. Fortunately, I've been fixing wiring for many years, I simply cut the new motor out of the harness, and used that nice glue-inside-heat-shrink tubing to seal the soldered 'Western Union' style splices. New light socket and lamps fit fine, worked fine, new motor is fine, problem resolved. FYI: Look closely at the wiring in you unit, there are two wire harnesses, one feeds the light, the other feeds the motor... Read more

More
$9.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Glide Bracket
Genuine Ge part
By: Ge
Part Number: WR72X10169

The Glide Bracket is an OEM part for GE refrigerators. This left bracket supports the refrigerator drawer, allowing it to slide in and out smoothly for easy access to stored items.

Causes of a bad glide bracket can include regular wear and tear, damage from overloading the drawer, or accidental impact that causes the bracket to crack or break.

Symptoms of a bad glide bracket include:

  • Difficulty sliding the drawer in and out
  • The drawer not aligning properly or coming off its tracks
  • Unusual noises when opening or closing the drawer
  • Visible cracks or breaks in the bracket

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ice dispenser broke and won't shut off freezer shelf support broke from sliding ice maker in and out all the time   Wayne B. • Belvidere , IL • November 07, 2015

The hinge broke on the ice dispenser funnel and housing. I took them off and replace them, putting the old switches and bulb in the new housing. It took some time to put the return spring back because it does not appear in the assembly diagram. Once working, it secures to the door with 4 screws, and worked as it should. The support slide inside the freezer is held with two 1/4 in screws that were taken off with a nut driver. the rear screw is hard to get at. The new bracket just screws on, and... Read more

More
$32.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Ice Dispenser Deflector
Genuine Ge part
By: Ge
Part Number: WR17X10703

Ice scattering everywhere? This deflector guides cubes or crushed ice down the chute into your glass. Replaces cracked or missing deflectors in 30 minutes.

Do-It-Yourself Stories from Customers like You The ice maker did not crush ice   Joy U. • Galveston , TX • October 02, 2016

When we inspected the first time we found that Plactic had broken from the spiral part that for wards the ice. Also there were cracks in two places of other parts. There was a hole in the bottom of the bin. The new spiral was assembled and two new parts were replaced with help from the video and the diagram and the unit worked well. Two months later, ice maker would not forward any ice though the bin was full. We emptied the bin sand have ordered a new part or two in hopes that they will... Read more

More
$11.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ice Deflector Spring
Genuine Ge part
By: Ge
Part Number: WR02X11768

The Ice Deflector Spring is an OEM replacement part for GE refrigerators. This spring is a crucial component of the ice dispensing system, specifically in selecting between crushed and whole ice cubes. It is designed to always force the diverter back in a way that the cubes get crushed. When whole cubes are selected, the solenoid pulls the lever against the spring’s tension to shift the configuration, allowing cubes to bypass the crusher blades.

Causes for a malfunctioning Ice Deflector Spring can include wear and tear from regular use, corrosion due to constant exposure to moisture, or mechanical failure that prevents it from effectively reverting the diverter to the crushed ice configuration.

Symptoms of a bad Ice Deflector Spring include:

  • The ice dispenser only dispensing whole cubes, even when crushed ice is selected
  • The diverter not returning to the crushed ice configuration
  • Unusual sounds during the ice dispensing process
  • The need for manual intervention to get crushed ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Not dispensing ice, making loud noise   Dennis V. • Parker , CO • March 24, 2020

When I took it apart I found that the drive cup was cracked, the helix lock plate hole was reamed out and the ice deflector spring was broken. The biggest problem was the helix had slipped down the shaft and allowed the end of the shaft to bore a hole in the housing which made it a bear to get out. Others have had the same problem. Once I got past that obstacle, it was simple to replace all the parts and it's working like normal again. Very helpful video explaining the repair. Read more

More
$16.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Compressor Capacitor
Genuine Ge part
By: Ge
Part Number: WR55X24065

Fix a refrigerator that won't start or clicks repeatedly. This compressor capacitor stores energy to start the motor. DIY repair typically takes 30 minutes.

This part fixes the following symptoms
  • Won't start
  • Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You Overload was smoking   Ken P. • Kent , OH • December 13, 2018

Replaced overload, and capacitor Read more

More
$48.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Crisper Drawer
Genuine Ge part
By: Ge
Part Number: WR32X10837

Clear plastic produce bin that slides into your refrigerator's fresh food compartment. Replace if cracked, broken, or missing to restore organized storage.

Do-It-Yourself Stories from Customers like You Just worn out parts   Angela M. • Cowen , WV • May 01, 2015

Purchased new parts form Appliance Pro ,and installed them. Read more

More
$76.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Recess Door Retainer (Dispenser Ice Chute)
Genuine Ge part
By: Ge
Part Number: WR2X8818

The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.

  • Holds the recess/ice door on its pivot within the dispenser assembly
  • Helps the flapper close fully to seal the ice chute
  • Restores smooth open/close action of the dispenser door
  • Common symptoms: loose or fallen flapper, poor chute seal, frost or condensation in the dispenser area, and ice clumping near the chute
What's included: 1 recess door retainer Install notes:
  • Unplug the refrigerator before servicing the dispenser
  • Carefully remove the dispenser bezel/control panel to access the ice chute door assembly
  • Note spring orientation and retainer position; transfer components to the new retainer
  • Verify flapper movement and seal before reassembly and restoring power

Do-It-Yourself Stories from Customers like You Yes ice was not coming out of the dispenser   Jason S. • Goose Creek , SC • December 02, 2014

I replaced the solenoid, door, spring and bucket. The bucket cracked from ice freezing inside it. Ice froze inside the bucket because the solenoid stopped pulling the door closed which allowed hot humid air into the freezer. While I was in there I replaced the dispenser door, spring and crank because they are cheap and the old ones were moldy. The mold is most likely from the door not closing and causing condensation on the parts as well. Read more

More
$7.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Dispenser Ice Chute Funnel And Lever
Genuine Ge part
By: Ge
Part Number: WR17X11264

This is the funnel guide and lever assembly located in the dispenser area of the refrigerator door. It directs ice from the internal chute into your glass and includes the lever you press to activate the dispenser. Replace this part if ice scatters or misses the glass during dispensing, the lever is cracked or broken, or the funnel no longer stays properly aligned.

Do-It-Yourself Stories from Customers like You The water and ice dispenser were not working   Christopher B. • Gales Ferry , CT • September 19, 2015

I bought two parts. The dispenser housing shield and the funnel ice dispenser. I watched the short video on how to put it back together and I was done in just a matter of minutes. The video was such a big help. I forgot how the spring went on and was able to watch the video and put it back together in just a matter of minutes. I know I must have saved a couple of hundred dollars on a service call. Read more

More
$37.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Armature Kit (Dispenser Solenoid)
Genuine Ge part
By: Ge
Part Number: WR62X26536

This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.

  • Converts the solenoid's electrical action into mechanical movement for the dispenser ice chute door
  • Helps maintain a proper seal to limit frost and moisture around the dispenser
  • Typical symptoms: ice won't dispense; chute door won't open/close; frost/ice buildup at the chute; loud buzzing or clicking from the dispenser area
  • Wear or sticking of the armature/spring can hinder movement and affect dispenser operation
What's included: 1 armature kit Installation notes:
  • Unplug the refrigerator and shut off water to the dispenser before servicing
  • Access the dispenser mechanism in the door; remove trim/control panel per your model's service information
  • Note the orientation of the armature, spring, and linkage; transfer components one-for-one to the new kit and secure hardware
  • Verify the solenoid plunger moves freely, reassemble, restore power, and test dispenser operation

Do-It-Yourself Stories from Customers like You Water was overflowing out of the ice maker during fill process and freezing into a block of ice!   Steven B. • Arlington , TX • March 17, 2015

Replaced the water supply valve...boom! Read more

More
$57.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Icemaker Water Supply Line
Genuine Ge part
By: Ge
Part Number: WR17X11625

Plastic water line that runs from the water valve to the icemaker fill tube. Replace if cracked, brittle, broken, or leaking at connection points.

Do-It-Yourself Stories from Customers like You The plastic tube from the valve to the ice maker was broken   Alan K. • Leesburg , VA • May 16, 2015

Thanks to the AppliancePartsPro, I ordered it online and received it quickly. I even used the step by step directions on how to replace the tube from the AppliancePartsPro website. Just be very careful and review the instructions first. Couple of important things: 1. Take a picture of the existing wiring and tubes before you take them apart. 2. *if* you remove the wires ( red and white plugs) from the valve, make sure you plug them back in correctly. 3. Do not pull or push the tubes hard. Use... Read more

More
$23.51

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Power Cord Assembly
Genuine Ge part
By: Ge
Part Number: WR23X10300

Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.

Do-It-Yourself Stories from Customers like You Power cord needed to be replaced   Jorge V. • Tucson , AZ • November 14, 2015

Spliced new and old power cord near the connections in the fridge and connected them. Didn't mess with the factory harnesses or connections inside actual fridge. Read more

More
$22.35

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google