Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker stopped making ice or won't turn off? This ice level control board monitors bin levels to control ice production. Simple DIY repair.
Bought new optic control boards, both the emitter and the receiver. The repair process was so simple. The KitchenAid repair tech came out to diagnose our issue. He was only going to come back and install a new emitter. They wanted a lot of money to do the repair. They were going to charge us $257 just for the part (emitter board). We bought both boards for $300 from AppliancePartsPros. We decided to replace both boards, because if one went bad the other might not be far behind. Read more
LED light module illuminates your refrigerator interior. Replace when lights become dim, flicker, or stop working entirely. Verify fit with your model.
Ordered replacement light module Read more
The Screw is an OEM replacement part for Whirlpool appliances. The precise threads allow screws to join or assemble other parts securely.
Causes of a bad screw can include stripping, cracking, or loss of threads due to repeated installation/removal over time. Corrosion is also possible depending on environmental conditions.
Symptoms of a bad screw include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Found the parts in the diagram of my fridge and simply installed it very easy Read more
This refrigerator roller supports the unit's weight and enables smooth movement for positioning and cleaning. Replace when wheels crack or roll roughly.
Replace front & rear wheels. Read more
Shoulder bolt screw that secures refrigerator door handles. Replace if missing, stripped, or loose to restore proper handle attachment and alignment.
Replaced broken handle Read more
Connects water line sections in your refrigerator. Replace if cracked, leaking, or damaged to restore secure connections to ice maker and dispenser.
Thought leak was coming from icemaker but refrigerator was making ice just fine. had puddle on floor just below freezer door. upon closer inspection realized leak was coming from drain line. there were 2 pieces of tubing and the connector. leak was coming from where tubing goes into connector. wanted to replace it. didn't know what it was called. did live chat with someone I think was named James. he sent me diagrams and I could identify the part. once identified I ordered it. boom.... Read more
Ice not dispensing from your refrigerator? The auger motor powers the mechanism that pushes ice through the chute. Moderate DIY repair with basic tools.
Installed a AP6007346 motor Read more
Fix clicking noises or uneven cooling in your refrigerator. This air damper diffuser controls airflow between compartments. Easy DIY repair in under an hour.
Removed & replaced baffle. Make sure you have a 1/4" nut driver. You can't see the nut that is at a 90 degree angle from the front of the refrigerator. There is a second nut hidden behind the air filter at the back of the compartment as well. Once you remove these two, the plastic housing comes off & the assembly (which is mostly made of Styrofoam) is easily replaced. Read more
Thimble bushing that fits inside the refrigerator door cam to create a smooth bearing surface on the hinge pin. Replace if worn, cracked, or missing.
Easy fix. Took two screws out of top door hinge. Lifted door off of bottom hinge. Laid door on blanket on floor. One cam part went on the hinge that was on the fridge, snapped in place. One cam part went on bottom of door, one screw to replace. Replaced door on bottom hinge then put top hinge back on. Job done. Read more
Ice maker not working or won't dispense? This ice bin safety switch detects when the bin is in place to activate your ice maker. Easy DIY fix.
Part easily replaced and problem was solved. Saved service call. Read more
Ice won't dispense but you hear the door open? This hex drive shaft connects the motor to the auger. Simple 30-minute fix restores ice dispensing.
I ordered the parts from you guys and printed the diagrams you had available. With that the repairs took less than 30 minutes. Read more
This ice container (ice bin) stores ice made by the icemaker and interfaces with the dispenser drive to deliver cubes or crushed ice. Replacing a cracked or worn bin restores dependable ice storage and dispensing performance.
Replaced the ice bucket assembly. Read more
Replaces the refrigerator water inlet tube that routes water from the inlet valve to the internal water system. Order a new tube if cracked or leaking.
Replaced hoses. They were not an exact replacement but they did end up working with the purchase of one additional fitting (5/16 x 1/4 coupler) Read more
Secures the roller to your refrigerator drawer so crisper and pantry pans glide smoothly. Replace when drawers stick or wobble. Confirm fit by model number.
I purchased replacement parts to completely replace basket, face plate, and rollers. I received exactly what I ordered. The only problem I had was removing the part(s) from the shipping box. I thought the part came assembled (as rollers had been installed onto the basket), but the face plate had not been snapped into place. When I removed everything from the shipping box as one piece, the face plate fell off, hit the tile floor, and cracked. Bummer. Since the original face plate was in good... Read more
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
I put all pieces that I ordered on the dryer and plugged it in. Read more
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more