Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Gtd4easw0wb Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dryer High Limit Thermostat
Genuine Ge part
By: Ge
Part Number: WE04X26139

Dryer won't heat or won't turn on? A failed high limit thermostat often causes these issues. This safety part prevents overheating. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Dryer dead   Kenneth N. • Panama City Beach , FL • August 30, 2020

Found open thermal fuse. While it was apart, cleaned out all the lent and lubed drum bearing. Read more

More
$33.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
High Limit Thermostat
Genuine Ge part
By: Ge
Part Number: WE04X26138

The High Limit Thermostat is an OEM replacement part for GE electric dryers. Located internally near heating components, this safety device monitors drum temperatures to prevent excessive heat accumulation.

Causes of malfunction relate to water residues creating shorts, loose terminals detaching wiring due to vibrations, or a worn heat sensitive mechanism reacting slower over time.

Symptoms involve:

  • Repeated thermal cut-off trips mid-cycle
  • Inability to select heat settings without errors shown
  • Bleach or smoke smells indicating unregulated temperatures

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You High temp sensor blew out drier would not light.   Gary H. • Boonville , NY • May 16, 2020

Did continuity tests on the sensors, till I figured out what one was bad. Read more

More
$11.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Door Assembly
Genuine Ge part
By: Ge
Part Number: WE10X26855

Complete dryer door assembly with frame, glass, and handle. Replace if your door is cracked, dented, scratched, or has broken hinges or latch components.

Do-It-Yourself Stories from Customers like You Hinge on door assembly broke and door wouldn't stay closed to dry clothes.   Ida B. • Utica , NY • May 04, 2020

Replaced the door assembly. Read more

More
$123.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Drum Baffle
Genuine Ge part
By: Ge
Part Number: WE14X20683

Plastic baffle that installs inside the dryer drum to lift and tumble clothes. Replace if cracked, broken, thinning, or missing vanes that may mark fabrics.

Do-It-Yourself Stories from Customers like You Sqeaking and thumping noises   Mike W. • Mt Juliet , TN • December 22, 2025

Replaced front drum support, both sets of dryer bearing slides and flipped felt pcs in front drum support. Repair video was very helpful Read more

More
$37.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Door Strike
Genuine Ge part
By: Ge
Part Number: WE01M10007

If your dryer won't start or the door won't latch securely, the door strike may be worn or broken. This part ensures proper door closure. Easy DIY fix.

Do-It-Yourself Stories from Customers like You Dryer won’t start or stay on.   Mike M. • Rotonda West , FL • August 03, 2020

Replaced lint filter and door latch, but door switch was the answer. Works great! No video for this model but was able to view a similar one to follow. Read more

More
$12.47

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Thermal Fuse
Genuine Ge part
By: Ge
Part Number: WE1X21975

Dryer won't start or run? A blown thermal fuse is often the cause. This safety part cuts power when overheating occurs. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Didn’t go on.   Christina S. • Levittown , NY • February 16, 2018

The part I ordered fixed my problem Read more

More
$30.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Flame Sensor
Genuine Ge part
By: Ge
Part Number: WE4X448

The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.

Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.

Symptoms of a bad flame sensor include:

  • The dryer not heating or taking longer to dry clothes
  • The dryer shutting off unexpectedly during a cycle
  • The igniter glowing but not igniting the gas
  • Error codes related to heating or ignition issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Dryer heating for only a short time then no heat at all   David N. • Fairfax , CA • December 08, 2018

GE Gas Dryer Model DBVH512GF1WW began to heat for only a short amount of time so drying clothes took WAY too long. Read online that the first thing to replace are the solenoids. Bought the two solenoids from AppliancePartsPros.com for about $50 total, and it seems to have fixed the problem. Had to watch a few videos to learn to disassemble the dryer, and the job took a couple of hours, but now that I know what I'm doing it could be done in less than 30 minutes. Also, the old solenoids tested... Read more

More
$79.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heat Diffuser
Genuine Ge part
By: Ge
Part Number: WE11X29438

Fix melted plastic or goop marks on clothes with a new dryer heat diffuser. Replaces damaged diffuser that causes staining. DIY repair with 3 screws.

Do-It-Yourself Stories from Customers like You Something melted to diffuser   Christopher J. • Sheboygan Falls , WI • November 09, 2015

Removed 3 screws which required a torx bit. Used small headless nails to line up the holes and use as a guide for sliding on new diffuser. Put screws in one at a time and tightened down. rotating the drum helped with slight mis-alignement with the screw holes. Read more

More
$40.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Thermostat
Genuine Ge part
By: Ge
Part Number: WE04X26216

Dryer not heating properly or overheating? This thermostat regulates temperature to keep your dryer running safely. Simple DIY fix in under an hour.

Do-It-Yourself Stories from Customers like You No heat no code   Wayne R. • Cabot , PA • July 21, 2026

This was a friends dryer. They'd been quoted a $200 call out fee and after taking with them on the phone were also told they could have the dryer taken away for $150. I told my friends that inwould fix it. I used a multimeter to check the thermostats, heaterbelement and funrion dial. I found 2 bad thermostats. I orderd one part from you, another from elsewhere as you did not have stock. I replaced the dead parts with new and the dryer heats again. It cost me $65 total in parts and shipping to... Read more

More
$36.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Power Terminal Block
Genuine Ge part
By: Ge
Part Number: WE4M325

Dryer won't start or keeps tripping the breaker? A damaged terminal block disrupts power distribution. DIY repair typically takes 30-45 minutes.

Do-It-Yourself Stories from Customers like You One of the wires on the power cord got hot and melted the plastic on the terminal it was attached to causing it to keep throwing the breaker off   Richard M. • Sealy , TX • February 07, 2016

Had to replace power cord and entire terminal assy. Read more

More
$33.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Door Strike Mounting Plate
Genuine Ge part
By: Ge
Part Number: WE1M570

Dryer door won't stay closed or pops open during cycle? This mounting plate anchors the door strike for secure latching. Quick DIY fix with video guide.

Do-It-Yourself Stories from Customers like You The dryer door kept popping open.   Debra S. • Peabody , MA • September 22, 2019

We ordered a door switch, dryer latch and strike plate. We realized that we only needed to replace the door switch. We watched a few videos and then replaced the switch. We couldn’t find a video for our model but they did give us a pretty good idea about what we needed to do. The hardest part was getting the original door switch out, all of the videos we watched showed us that it would pop out with a little pressure from a flat head screw driver, from the front of the switch. We could not get... Read more

More
$14.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Motor Drive And Pulley
Genuine Ge part
By: Ge
Part Number: WE49X28295

Fix a dryer that hums but won't start with this motor drive and pulley assembly. Powers the drum and maintains proper belt tension and alignment.

More
$154.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Thermostat
Genuine Ge part
By: Ge
Part Number: WE04X25199

The Thermostat is an OEM component specifically designed for GE laundry machines. It is a heat-sensing component that monitors and regulates air temperatures inside the dryer drum. Precise thermostat functioning ensures proper drying temperatures are reached and maintained for optimal performance.

Symptoms of a bad thermostat include:

  • The dryer failing to heat or only heating intermittently  
  • Unexpected temperature display readings or error codes
  • Inconsistent moisture removal or garments not fully drying 

Causes include sensor degradation, electrical faults, or improper ventilation reducing its ability to accurately measure temperatures.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You No heat in gas dryer   Peter S. • Glenview , IL • April 23, 2024

Realizing that there could be multiple reasons for a gas dryer failing to heat, I decided to test everything I could. The very detailed and product specific video showed me how to disassemble the dryer. The thermostat, cycling thermostat, high limit, flame detector, igniter, gas valve coils and timer all showed correct continuity or resistance. I thought it might be the gas valve itself, but felt that wasn't likely so I decided to go ahead and replace the thermostats and limit switch since... Read more

More
$18.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Gas Conversion Kit Natural Gas To Lp Propane
Genuine Ge part
By: Ge
Part Number: WE49X32950

Converting your dryer from natural gas to propane? This LP conversion kit ensures proper burner operation and safe ignition for LP gas supply installations.

More
$8.54

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Control Panel Backsplash Assembly
Genuine Ge part
By: Ge
Part Number: WE03X24547

Control panel backsplash assembly for dryers. Provides the interface housing for cycle selection buttons and display. Replace if cracked, broken, or damaged.

More
$135.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Thermostat
Genuine Ge part
By: Ge
Part Number: WE04X25195

Fix a dryer that won't heat properly or overheats with this thermostat. Senses exhaust temperature to regulate heat cycles and prevent damage.

More
$20.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google