Gtd72ebpodg Parts

Best Seller

Genuine Ge part

High Limit Thermostat

By: Ge

Part Number: WE04X26138

The High Limit Thermostat is an OEM replacement part for GE electric dryers. Located internally near heating components, this safety device monitors drum temperatures to prevent excessive heat accumulation.

Causes of malfunction relate to water residues creating shorts, loose terminals detaching wiring due to vibrations, or a worn heat sensitive mechanism reacting slower over time.

Symptoms involve:

Repeated thermal cut-off trips mid-cycle
Inability to select heat settings without errors shown
Bleach or smoke smells indicating unregulated temperatures

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You High temp sensor blew out drier would not light. Gary H. • Boonville , NY • May 16, 2020

Did continuity tests on the sensors, till I figured out what one was bad. Read more

$11.95

Compare At:: $14.10
You Save:: $2.15

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Outlet Control Thermistor

4.8 (4)

By: Ge

Part Number: WE4M448

Dryer shuts off mid-cycle or overheats? The outlet control thermistor monitors exhaust temperature. Moderately difficult repair requires drum removal.

Do-It-Yourself Stories from Customers like You GE profile dryer shut off mid cycle Mark A. • Boynton Beach , FL • February 01, 2021

My first attempt was to replace the main board and then the thermistor, should have done this the other way around, turned out it was the thermistor, a pretty cheap part, dryer works great now. Repair requires removing the drum but overall not too difficult or time consuming. Read more

$52.42

Compare At:: $62.38
You Save:: $9.96

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Drum Baffle

5.0 (2)

By: Ge

Part Number: WE14X20683

Plastic baffle that installs inside the dryer drum to lift and tumble clothes. Replace if cracked, broken, thinning, or missing vanes that may mark fabrics.

Do-It-Yourself Stories from Customers like You Sqeaking and thumping noises Mike W. • Mt Juliet , TN • December 22, 2025

Replaced front drum support, both sets of dryer bearing slides and flipped felt pcs in front drum support. Repair video was very helpful Read more

$36.56

Compare At:: $43.51
You Save:: $6.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Door Strike

5.0 (5)

By: Ge

Part Number: WE01M10007

If your dryer won't start or the door won't latch securely, the door strike may be worn or broken. This part ensures proper door closure. Easy DIY fix.

Do-It-Yourself Stories from Customers like You Dryer door connection. Kerin P. • Columbus , OH • August 08, 2021

Ordered new GE dryer strike plate w/stick and latch. Switched out dryer latch. Turns out it is the dryer sensor, Switched the opening ot the dryer door to the opposite side. That worked for several cycles until the sensor not reading door closure so I'm having to apply pressure to the bottom of the dryer door (where the sensor is located) before starting. Read more

$11.95

Compare At:: $14.10
You Save:: $2.15

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Thermal Fuse

5.0 (2)

By: Ge

Part Number: WE1X21975

Dryer won't start or run? A blown thermal fuse is often the cause. This safety part cuts power when overheating occurs. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Didn’t go on. Christina S. • Levittown , NY • February 16, 2018

The part I ordered fixed my problem Read more

$28.95

Compare At:: $34.16
You Save:: $5.21

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Door Strike Mounting Plate

4.8 (5)

By: Ge

Part Number: WE1M570

Dryer door won't stay closed or pops open during cycle? This mounting plate anchors the door strike for secure latching. Quick DIY fix with video guide.

Do-It-Yourself Stories from Customers like You The dryer door kept popping open. Debra S. • Peabody , MA • September 22, 2019

We ordered a door switch, dryer latch and strike plate. We realized that we only needed to replace the door switch. We watched a few videos and then replaced the switch. We couldn’t find a video for our model but they did give us a pretty good idea about what we needed to do. The hardest part was getting the original door switch out, all of the videos we watched showed us that it would pop out with a little pressure from a flat head screw driver, from the front of the switch. We could not get... Read more

$14.95

Compare At:: $17.79
You Save:: $2.84

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Heat Diffuser

4.3 (3)

By: Ge

Part Number: WE11X29438

Fix melted plastic or goop marks on clothes with a new dryer heat diffuser. Replaces damaged diffuser that causes staining. DIY repair with 3 screws.

Do-It-Yourself Stories from Customers like You Something melted to diffuser Christopher J. • Sheboygan Falls , WI • November 09, 2015

Removed 3 screws which required a torx bit. Used small headless nails to line up the holes and use as a guide for sliding on new diffuser. Put screws in one at a time and tightened down. rotating the drum helped with slight mis-alignement with the screw holes. Read more

$40.41

Compare At:: $47.68
You Save:: $7.27

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Thermostat

By: Ge

Part Number: WE04X25198

Dryer not heating or overheating? A faulty thermostat disrupts temperature regulation, preventing proper drying. This part monitors drum heat levels.

$12.95

Compare At:: $15.41
You Save:: $2.46

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Cycling Thermostat

5.0 (1)

By: Ge

Part Number: WE04X25200

Dryer not heating or drying clothes properly? This cycling thermostat regulates temperature during the drying cycle. Moderate DIY repair for most models.

Do-It-Yourself Stories from Customers like You Failing to dry clothes David K. • Mohnton , PA • September 19, 2022

Removed exterior panels, cleaned all venting, replaced outlet thermistor and thermostat. Pressure washed all removable parts. Reassembled. Now working as it should. Read more

$17.95

Compare At:: $21.36
You Save:: $3.41

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Motor Drive And Pulley

By: Ge

Part Number: WE49X28295

Fix a dryer that hums but won't start with this motor drive and pulley assembly. Powers the drum and maintains proper belt tension and alignment.

$154.95

Compare At:: $184.39
You Save:: $29.44

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Lint Trap Duct Slides

5.0 (1)

By: Ge

Part Number: WE01X24546

Lint trap duct slides provide smooth operation for your dryer's lint screen. Replace if slides are cracked, broken, or filter doesn't glide properly.

Do-It-Yourself Stories from Customers like You The front bearing on the dryer drum was completely wore out Ernest B. • Tiffin , OH • September 20, 2025

The front bearing on the dryer drum was completely wore out. Read more

$131.73

Compare At:: $156.76
You Save:: $25.03

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Blower Wheel

4.0 (1)

By: Ge

Part Number: WH16X34317

The Blower Wheel is an OEM component specifically designed for GE dryers. It is responsible for circulating air during the drying cycle, directing airflow through lint and clothes to remove moisture. The plastic blades of the blower wheel push air through the dryer and out the vent when the motor is running.

Symptoms of a bad blower wheel include:

Slow or inefficient drying times even on low moisture loads
Strange noises from inside the dryer cabinet
Excessive vibrations felt through the dryer door or cabinet
Bent or cracked blower wheel blades

Causes can include normal wear and tear over time, accidents that damage the blades, or failures in the secure mounting of the blower wheel.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Blower wheel was not working.. Bobby C. • Sevierville , TN • November 23, 2020

I purchased a new blower wheel and replaced it. It saved me about a $200 repair bill. Read more

$41.68

Compare At:: $49.60
You Save:: $7.92

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Dryer Mounting Screw

5.0 (1)

By: Ge

Part Number: WE2M302

Secures dryer panels, brackets, and internal assemblies. Replace missing, stripped, or damaged screws to restore proper alignment and prevent vibration.

Do-It-Yourself Stories from Customers like You Dryer door did not close Wendy G. • Yonkers , NY • November 09, 2019

It was easy, I got the model number of my dryer, then I went on google and found your website. You got a perfect diagram of the door of my dryer. After I saw the video relate it to my problem, I purchased the parts that I need it to fix it, I didn’t need my husband to do it for me. I gave him a surprise after he got home for work. It was all done. Thanks Read more

$8.95

Compare At:: $10.65
You Save:: $1.70

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Fuse Terminal Cover

By: Ge

Part Number: WE1M1007

This fuse terminal cover shields and insulates the fuse connection inside your appliance, helping prevent accidental contact and shorting. Replace a cracked or missing cover to maintain safe electrical protection and dependable circuit performance.

Covers and insulates the fuse terminals to protect the connection
Helps prevent accidental contact, arcing, and debris intrusion at the fuse
Common signs you need this part: missing cover, cracks, heat discoloration, or a cover that won't stay secured
Promotes a secure, consistent fuse connection once installed

What's included: 1 fuse terminal cover Installation notes:

Disconnect power at the breaker or unplug the appliance before servicing
Access the fuse area per your service information; note wiring and cover orientation
Remove the damaged cover; inspect terminals and wiring for heat damage or looseness
Seat the new cover fully and verify it is secure and clear of wiring

$30.79

Compare At:: $36.33
You Save:: $5.54

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Dryer Idler Arm

5.0 (1)

By: Ge

Part Number: WE03X20434

Supports the idler pulley to maintain proper belt tension in your dryer. Replace if the arm is warped, cracked, or causing belt tracking issues.

Do-It-Yourself Stories from Customers like You Dryer won’t tumble belts keep breaking. Devon Ann B. • Melbourne , FL • March 27, 2021

After replacing the belt less than a year ago, when it broke again we started to think something may be going on with the idler pulley. Ordered a new belt and pulley wheel, only to have the belt break again the very next day. After a call to customer service explaining the situation, they replaced the belt and pulley wheel which were both under warranty, and suggested replacing the arm itself. We also had to replace the interlock switch. Parts arrived quickly. The repair itself took about an... Read more

$84.95

Compare At:: $101.09
You Save:: $16.14

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Dryer Control Board And Chassis Assembly

By: Ge

Part Number: WE22X32940

Fix unresponsive controls or cycle selection issues with this dryer control board and chassis assembly. Restores electronic control communication.

$243.64

Compare At:: $292.37
You Save:: $48.73

IN STOCK

Ships Today Guaranteed

Add to Cart

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Gtd72ebpodg Parts

High Limit Thermostat

Dryer Outlet Control Thermistor

Dryer Drum Baffle

Dryer Door Strike

Dryer Thermal Fuse

Dryer Door Strike Mounting Plate

Dryer Heat Diffuser

Dryer Thermostat

Dryer Cycling Thermostat

Dryer Motor Drive And Pulley

Dryer Lint Trap Duct Slides

Blower Wheel

Dryer Mounting Screw

Fuse Terminal Cover

Dryer Idler Arm

Dryer Control Board And Chassis Assembly