Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Gtwh300mows Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Tub Dampening Strap 2-Pack
Genuine Ge part
By: Ge
Part Number: WH01X39337

Replaces broken or worn tub dampening straps that stabilize your washer's inner tub during operation. Restores proper suspension to reduce vibration.

Do-It-Yourself Stories from Customers like You GE washer sounded like jet engine during spin cycle   Scott V. • Centreville , VA • August 26, 2020

My 9-year-old GE washer, in which I replaced the motor two years ago, developed an extremely loud roaring sound during the spin cycle. After reviewing stories here to pinpoint the problem, I replaced the tub bearing, mode shifter, and tub seal. I also installed a new tub nut, split washer, and belt. This repair involves taking the washer apart in order to get at the tub bearing and mode shifter, which are inconveniently located in the very center of the machine. I bagged labeled all the... Read more

More
Best Seller
Tub Bearing Split Ring
Genuine Ge part
By: Ge
Part Number: WH02X10265

This tub-bearing split ring is an OEM replacement part designed for GE washing machines. This part measures 2 inches in diameter. It is positioned between the inner and outer tubs to hold the tub bearing inside the outer tub. The Tub Bearing Split Ring not only supports the tub/hub assembly but also ensures smooth operation. 

Symptoms of a bad Tub Bearing Split Ring include:

  • Excessive vibration or tub imbalance during spins  
  • Loud clunking, knocking or grinding sounds  
  • Reduced spin speeds or inability to achieve high RPMs
  • Premature tub or bearing wear requiring replacement

Causes can be extended use over time which leads to wear and fatigue of the split ring material. Cracks or breaks can develop, reducing its stability and load-bearing capacity.

This genuine GE replacement part is also compatible with Hotpoint, RCA and some Kenmore front-load models. 

NOTE: For the washer outer tub seal order WH02X10383.

Do-It-Yourself Stories from Customers like You Ge washer making loud roaring noise during spin cyc;e   Gerald P. • Auburn , GA • January 28, 2018

I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all... Read more

More
Best Seller
Knob Clip
Genuine Ge part
By: Ge
Part Number: WH01X10106

The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.  

Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.

Symptoms of a bad Knob Clip include:

  • The control knob is loose or falls off the panel easily.
  • Difficulty in adjusting settings due to a loose knob.
  • The knob does not stay in place or slips when turned.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You I was unable to select a cycle knob wouldn't advance and stay   Tamara I. • Hatfield , PA • September 23, 2014

I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more

More
Washer Top
Genuine Ge part
By: Ge
Part Number: WH44X21834

The Washer Top is an OEM part for GE washers. It is the upper panel that covers the internal components of the washing machine and provides a flat surface for loading and unloading laundry.

Causes of a bad Washer Top can include physical impact, warping due to prolonged exposure to heat or moisture, or general wear and tear over time.

Symptoms of a bad Washer Top include:

  • Visible cracks, dents, or damage to the top panel
  • Difficulty opening or closing the lid due to misalignment or warping
  • Water leaks around the top area during wash cycles
  • Excessive noise or vibration caused by a loose or damaged top

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The lid and the top we’re both rusty and paint coming off.   Paul D. • Lilburn , GA • January 26, 2018

I bought and replaced the top and the lid for the washer. The washer now looks like a brand new washer even though it’s 12 years old. Total repair took less than an hour. Read more

More
Funnel Bleach
Genuine Ge part
By: Ge
Part Number: WH01X10057

 

Do-It-Yourself Stories from Customers like You Broken bleach funnel   Richard M. • Huntsville , AL • April 10, 2018

Took out the broken one and snapped the new one in , done. Read more

More
Washer Pressure Switch
Genuine Ge part
By: Ge
Part Number: WH12X22716

Fix washer overfilling or not filling issues with a new pressure switch. This part senses water level and signals the control to advance the cycle properly.

More
Hose Drain Asm
Genuine Ge part
By: Ge
Part Number: WH41X25457

 

Do-It-Yourself Stories from Customers like You Drain hose   Roger L. • Port Charlotte , FL • February 06, 2017

Replaced Read more

More
Overload (Thermal Protector)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4344040

This overload is a thermal protection device that mounts on the motor/compressor and opens the circuit when excessive heat or current is detected. Replacing a weak or failed overload helps restore safe startup and protects the windings from damage. What it does:

  • Monitors motor/compressor temperature and current draw
  • Interrupts power on overheat/overload to prevent damage
  • Aids troubleshooting of start/run issues when paired with the start device
  • Common symptoms: hums then clicks off, won't start, intermittent shutdown, frequent tripping
What's included:
  • 1 thermal overload protector
Install notes:
  • Disconnect power before servicing; allow components to cool
  • Access the terminal area on the motor/compressor; remove any cover
  • Note/photograph wire positions; transfer wires and fully seat the new overload on the correct terminal
  • Inspect the start relay, capacitor, and terminals for heat damage; replace any compromised parts

Do-It-Yourself Stories from Customers like You The unit was not cooling.   Todd V. • Riverside , CA • May 13, 2023

Replaced the compressor's Overload and Start Relay. Read more

More
Drive Motor
Genuine Ge part
By: Ge
Part Number: WH20X10093

This genuine OEM part is a drive motor for washers. The drive motor is the main engine that drives the washer tub allowing it to rotate and wash clothes effectively. If the washer is no longer spinning or the power has significantly decreased, it might be a sign that the drive motor needs to be replaced. Luckily, replacing this part is a relatively simple repair.To replace the drive motor, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the screws that attach it. After removal, locate the drive motor and proceed to unthread the mounting screws holding it to the washer. Proceed to pull the old motor out of its place and install the new motor by threading the screws that secure it. This replacement part is sold individually and is compatible with GE, RCA, and Hotpoint brand washers.

Do-It-Yourself Stories from Customers like You Filled up and ran through cycle but would not agitate or spin   David R. • Ada , OH • July 04, 2014

New motor. The motor was ok, but the control board mounted on the motor wasn't. Can't buy to control board separate from the motor. Easy to replace the motor, but not so easy to troubleshoot to make sure the problem was the motor and not something else. Read more

More
Knob & Clip Assembly (Control Shaft Clip)
Genuine Ge part
By: Ge
Part Number: WE01X22617

This knob and clip assembly secures a range or cooktop control knob to the control shaft so the knob turns the valve or switch reliably. It restores firm, responsive control and prevents the knob from slipping. What it does:

  • Secures the control knob to the shaft so knob rotation moves the underlying valve or switch
  • Prevents the knob from wobbling, spinning freely, or falling off during use
  • Re-establishes positive engagement for accurate temperature or burner selection
  • Compatible with common plastic control knobs that use a clip-style retention
What's included:
  • One knob and clip assembly as shown
Install notes:
  • Disconnect power to the appliance before starting electrical work; for gas appliances, shut off the gas supply per the appliance manuals
  • Remove the existing knob (pull straight off) and replace the clip and knob; use gentle pressure to avoid breaking plastic parts
  • If the knob is tight after installation, ensure the clip is fully seated on the shaft and aligned with the knob hub

More
Cord Power Asm
Genuine Ge part
By: Ge
Part Number: WH19X10068

 

More
Wireform Hinge (Long)
Genuine Ge part
By: Ge
Part Number: WH1X2743

 

More
Washer Shipping Bar
Genuine Ge part
By: Ge
Part Number: WH46X344

This shipping bar was installed during appliance transport to secure moving parts and prevent damage. It should be removed before first use to allow proper operation of your washer's door mechanism. Remove this bar if your washer door won't open properly or if you hear rattling noises during operation.

More
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10856125

 

More
Rear Roller
Genuine Whirlpool part
By: Whirlpool
Part Number: 10450701

 

More
Clamp Tub Outlet
Genuine Ge part
By: Ge
Part Number: WH01X10134

 

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google