Gud27essjww Parts

Idler arm assembly mounts to the dryer frame and maintains proper belt tension on the drum. Replace if the arm is cracked, bent, or the pulley is worn.

Seals the dryer door to prevent heat and moisture loss. Replace when worn or damaged to restore drying efficiency and stop lint escape. Verify fit.

This dryer gasket seals critical air paths in your GE dryer to maintain proper airflow, temperature, and efficiency. Replacing a worn seal helps prevent heat loss and lint escape while reducing noise and friction.

• Creates an air-tight seal in the dryer to keep heat and airflow where they belong
• Helps contain lint and moisture within the drum and exhaust path
• Supports efficient drying performance and consistent temperatures
• Common failure signs: longer dry times, warm air leaking near the opening, visible tears or fraying, excess lint around the door/front panel

• Disconnect power; turn off gas supply before servicing
• Allow the dryer to cool completely; wear cut-resistant gloves
• Access the gasket location per your model's service instructions
• Remove the old gasket and residue, clean the surface, position the new gasket correctly, and reassemble; allow any adhesive to set if your model requires it

Secures components inside your washer to prevent movement, loose connections, and rattling noise. Replace when worn or missing to restore stability.

Secures internal components and keeps panels aligned in your washer dryer combo. Replace if mounting points are worn, broken, or causing looseness.

Dryer won't start, clicks but drum doesn't turn, or makes grinding noise? This motor and pulley assembly powers the drum and blower. Moderate DIY repair.

Fix bleach pooling or uneven dispensing in your laundry center. This funnel directs bleach into the wash tub, preventing spills and odor issues.

Complete service kit for washer tub and basket assembly. Replace when you notice leaks, unusual noise, or poor spin performance. Verify fit with your model.

This washer motor run capacitor stores and releases electrical energy to help the drive motor start and run smoothly. Replacing a weak capacitor can help restore consistent agitation and spin and reduce motor humming or stalling under load.

• Provides the phase shift and torque assist the drive motor needs to start and stay running
• Can address: washer won't start, no agitate or spin, motor only hums/buzzes, or stops under load
• Visible clues of failure can include a swollen, cracked, or leaking capacitor case

• Unplug the appliance before servicing; capacitors can retain a charge even when power is off
• Discharge the capacitor safely before handling
• Note wire positions; move leads to the same terminals and secure the capacitor in the original bracket/orientation
• Inspect connectors and replace any burnt or loose terminals to ensure a tight fit

Washer not cleaning clothes properly? This agitator assembly creates the wash action that moves laundry through water. Moderately difficult replacement.

Restores the dryer's front airflow path and drum seal. Replace if the duct is damaged, cracked, or the felt seal is worn, compressed, or missing.

The Tub Cover Assembly is an OEM part for GE top-load washing machines. It covers and protects the agitator and inner tub inside the washer.

Causes of a bad tub cover can include damage such as cracks or ruptures over time from repeated use, or warping due to exposure to high heat or moisture. 

Symptoms of a defective tub cover assembly include:

• Water leaks inside or outside the washer during operation  
• Increased noise levels from an unsecured or poorly fitted cover
• Inability to fully close or lock the washer door or lid

This genuine GE replacement is also compatible with Hotpoint, RCA, and select Kenmore units. 

This is the transmission or gearcase assembly that drives the washer's agitator and spin basket. It converts motor rotation into the agitation and spin cycles needed to wash and extract water from clothes. Replace this assembly if the washer makes loud grinding noises during agitation, fails to spin properly, or leaks oil from beneath the tub.

This spring cover protects and retains a mechanism spring inside your washer. Replacing a cracked or missing cover helps keep the spring seated, limits debris intrusion, and supports smooth, reliable movement of the associated control, latch, or linkage.

• Shields the spring and helps keep it properly seated in its pocket
• Reduces friction and wear that can lead to premature spring failure
• Supports consistent return action for the related control, latch, or lever
• Typical symptoms include a missing/broken cover, exposed spring, rattling, or erratic operation

• Unplug the appliance and turn off water before servicing
• Access point varies by model; photograph spring/cover orientation before removal
• Control the spring during disassembly to prevent sudden release
• Ensure the cover is fully seated; test operation before final reassembly

If your washer overfills, underfills, or won't advance past fill, this electronic water level pressure switch monitors tub pressure to control fills.

This is a small plastic cup that sits inside the washer's agitator or dispenser housing and holds liquid fabric softener, releasing it at the appropriate time during the rinse cycle. It is commonly found on laundry center combo units. Replace this part if fabric softener is not dispensing properly, the cup is cracked or missing, or you notice softener residue building up on clothes.