Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Radiant Element Spring is an OEM part for GE electric ranges. This spring supports the radiant element coil and provides the necessary tension to allow the coil to glow red-hot during the cooking process.
Causes of a bad spring can include fatigue from repeated heating and cooling cycles, damage due to impact or mishandling, or corrosion over extended use.
Symptoms of a bad radiant element spring include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
ST10-16 X 7/16"
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy. Read more
Broiler quit heating? This upper broil element restores intense top heat for fast, even browning and searing. Easy DIY replacement in about 20 minutes.
Ordered replacement, took out old element and put in the new one. Very easy, and it works! Read more
Oven door won't lock for self-clean or latch jams? This lock lever assembly restores secure door locking. Moderate DIY with stovetop removal required.
I replaced the latch and handle assembly. It's easy when you see how it goes together. Unscrew the two screws under the front edge of the stovetop, have a helper lift the stovetop up, unscrew the six screws holding the metal plate down and remove the plate, unplug the wires connected to the latch switch, and unscrew the two front screws holding the latch assembly in place. Replace the latch assembly and put it back together in reverse. Read more
White oven door handle that mounts to the front of your range door. Replace if cracked, broken, or damaged from over-tightening or daily wear and tear.
Remove and replace door handle. Make sure to keep screw spacers in place and do not over torque screws! Read more
White control knob for electric ranges and cooktops. Replaces broken, cracked, or missing knobs on burner controls. Direct-fit replacement part.
Just a simple install my maintenance man just put it in with no problems. Read more
Seals the oven light lens to the cavity, blocking heat and moisture from the assembly. Replace if worn, cracked, or the lens won't seal properly.
I researched on Appliancepartspros.com how to fix a control board. I came across some online videos showing exactly how easy the process really was. I also typed in the model number on the site and was able to pull up the parts diagrams to figure out which other part numbers I needed. I ordered the control board, light socket, light gasket, and light bulb. I was shocked to know that the control board came in the next day! The other parts arrived the following day as well, which definitely... Read more
Black. 8-18 AB HXW 3/8
I ordered the part and was impressed to receive it within two day! I didn't need the screws I ordered (which I ordered just in case) but the trim was put on with no problem and my oven looks brand new again! Thank you! Read more
This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.
I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot. Read more
Includes 12 washers.
Attaches oven door panels together on your range. Replace this threaded screw if the original is stripped, missing, or no longer holding panels secure.
My son-in-law helped me. He pulled the liner open enough that he could see he just had to tighten up the existing screw on the door handle.. For the liner, we put a new screw in each side and tighted it up. At first we were afraid it was in the hole the screw went into but finally got it to screw in tightly. Back in business!!! Read more
Size: 10-32 GXTT FLP.595 S
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes. Thanks so much! Read more
Oven door won't lock for self-clean cycle? This latch and handle assembly restores the door lock mechanism. Moderate DIY repair in under an hour.
Burner not heating or only partial ring works? This 9-inch dual radiant element restores full or inner ring heating. 15-minute DIY fix for cooktops.
Quick and easy fix. The hardest part was tracking down the correct part (which this was). 15 minute fix just make sure to take a pick of the wires before dismantling if it's not going right back together. Read more
Thermal insulation installs behind the oven liner to retain heat and protect surrounding surfaces. Replace when burned, contaminated, or damaged.
My husband googled the issue, took apart the oven to see what he needed and we ordered the parts. The oven was back up and running like new within a week! To buy a new oven to replace the one we own would have been well over $700. This was an $80 fix. Read more
Door pad gasket creates a seal between your oven door and front panel. Replace if worn, cracked, or causing heat loss. Confirm fit with your model number.
Ordered replacement from appliancepartspro.com and installed. Took maybe 10 minutes to remove old one and instal new. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.