Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Oven Door Handle Endcap is an OEM part for GE ovens. This part serves as the finishing touch on either end of the oven door handle, providing not only a clean and polished look but also a secure connection point for the handle itself.
Signs that it's time to replace an oven door handle endcap include visible damage or cracks, the endcap becoming loose or detached, or difficulty in securing the oven door handle properly.
Symptoms of a bad Oven Door Handle Endcap include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
REPLACE door hinges and door handle (about 30 minutes) 1. Open the door to the first catch. 2. Lift the latch keepers (stoppers) on the hinge. 3. Lift / pull the door away from the oven. 4. set on a flat surface with inside of door up. 5. Remove three screws on the bottom of the door. 6. Remove two screws on the inside towards of the top of the door (gold in color). These are long wood type screws. 7. carefully lift the inner door from the outer door. (NOTE: there are two metal pieces that the... Read more
The Infinite Heat Switch Kit is an OEM part for GE ranges and cooktops. This kit is essential for controlling the temperature of the burners on your range or cooktop, allowing you to adjust the heat level from low to high.
Causes of damage to the infinite heat switch can include normal wear and tear from frequent use, electrical issues such as short circuits or power surges, and physical damage from cleaning or impact.
Symptoms of a bad Infinite Heat Switch include:
I replaced all 3 remaining burner controls because they were all original (mid 1970s GE electric range w/coil burners), and one of the controls occasionally made arcing sounds when cycling the burner on and off. If a control is making odd noises - more than just a quiet metallic clicking as it cycles - it should be replaced. I'm assuming you have experience with the tools needed and can do simple mechanical assembly or disassembly, but have not previously worked with electrical equipment of... Read more
The Bake Element is an OEM part for GE ovens. It is responsible for providing the necessary heat for baking by radiating heat from the bottom of the oven. It measures 18 1/4"" side to side, 15-1/2" from the mounting bracket to the back, and 3" from the terminal to the back plate, with 1/4"male spade terminals.
You should replace the bake element if it becomes damaged or fails to heat properly. Causes of a bad bake element can include regular wear and tear, electrical malfunctions, or physical damage such as cracking or breaking.
Symptoms of a bad bake element include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
My oven element "melted away" on a Saturday evening. I couldn't find any parts locally on Sunday so that left me until Monday with no oven. On Monday, I had the option of buying one locally for $70+ dollars or go online. I've dealt with AppliancePartsPros before and they've always delivered so I took the chance and put an order in. I had the part Tuesday afternoon without driving anywhere and for only $54... in less than 30 hours after I ordered it! WOW! It took almost no time to install... Read more
The Oven Door Gasket is an OEM part for GE ranges. This seal prevents heat from escaping the oven cavity when baking or broiling. The gasket helps maintain temperatures for more efficient cooking and reliable operation. The gasket measures approximately 84" long.
Causes of a bad gasket can include deterioration over prolonged high-heat use, damage due to abrasion or impact, or warping from moisture exposure over time.
Symptoms of a bad oven door gasket include:
This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
I removed the door, mostly so we could really clean the all the nooks and cranny's of the stove, and make the handle and gasket replacement easier. Attaching the new handle was not difficult, but did require some minor door dis-assembly. Removing the old gasket and putting on the new gasket was a breeze. The hardest part of the job was putting the door back onto the stove, but we got it done and the stove looks and works great. Read more
The Element Receptacle and Wire Kit is an OEM part for GE ranges and ovens. It serves as a crucial component in connecting the heating element to the power source, ensuring that electricity can flow to the element for heating.
This kit typically includes a receptacle, wires, and possibly other connectors or hardware needed for installation. Proper connection via this kit is essential for the heating element to function correctly and efficiently.
Symptoms of a bad Element Receptacle and Wire Kit include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
I ordered the recommended Infinite Heat Switch Kit and Element Receptacle and Wire Kit and installed them. The latter was a breeze, appearing to be exactly the same as the original, except for the wire color. The switch, though, was another story. It is a RobertShaw "replacement" part, designed, it seems, for use in the greatest number of original units as possible. The most obvious difference between this switch and the original (besides its comparatively small size) is the long, segmented... Read more
The Oven Door Seal is an OEM part for GE ovens. This seal prevents heat from escaping during cooking, ensuring that the oven maintains a consistent temperature for efficient and even cooking.
A compromised Oven Door Seal can result from several factors, including normal wear and tear from regular use, exposure to high temperatures that degrade the material over time, or accidental damage such as tears or cuts.
Symptoms of a failing Oven Door Seal include:
Looked at YouTube, took it off and figured out which one it was and ordered one from AppliancePartsPros.com. It was very easy. Just tucked the ends in with a screwdriver. Delivery from Appliance Parts was easy and fast. Read more
These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.
This part fixes the following symptoms:
The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more
The Oven Rack is an OEM part for GE ovens. It is designed to hold and support cookware and bakeware within the oven cavity, allowing for proper air circulation and even cooking. The rack measures about 24 inches wide by 18 inches deep.
You should replace the oven rack if it becomes damaged or worn out. Causes of a bad oven rack can include regular wear and tear, exposure to high temperatures, or physical damage such as bending or warping. A compromised oven rack can affect the stability of cookware and lead to uneven cooking results.
Symptoms of a bad oven rack include:
I measured my oven racks which are 24"X18" and ordered two new ones and had them within three days of my order! They are perfect! Read more
The Oven Door Handle is an OEM part for GE ovens. This handle provides a secure grip for opening and closing the oven door, ensuring safe and convenient access to the oven cavity. The handle measures approximately 22 inches by 1 inch.
Causes of a bad oven door handle can include wear and tear from frequent use, accidental impact, or exposure to high heat, which can weaken or damage the handle over time. A faulty handle can compromise the ability to safely operate the oven door.
Symptoms of a bad Oven Door Handle include:
I removed end caps installed one end cap fitted handle to this end cap then fitted 2nd end cap to handle then attached this end cap to stove door. Read more
The Handle is an OEM part compatible with GE ovens and ranges. It is the component that allows you to open and close the oven door or range oven easily and securely. The handle measures 21 inches in length.
Over time, the handle can become loose, wobbly, or even detach due to repeated use or accidental impact. Causes of a bad handle include excessive force or mishandling, wear and tear on the mounting hardware, or simply aging and deterioration of the materials.
Symptoms of a faulty handle include:
The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.
Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.
Symptoms of a bad Oven Light Lens include:
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more
The Bottom Trim Channel is an OEM part for GE electric ranges. As an essential cosmetic component, it works to cover and seamlessly conceal the area along the bottom perimeter of the range.
Causes of a faulty trim channel can include damage from impact or abrasion, degradation of material finishes from repeated cleaning, or loose fittings from normal stresses of use over time.
Symptoms include:
Color: White
This GE replacement restores a sleek, professional look while protecting internal components from spills and debris ingress. Compatible with Hotpoint, RCA, and select Kenmore models as well, it prevents future repairs from minor aesthetic issues. Keep your range looking its best!
With the help of Ms.Kelly Hunt, AppliancePartsPros.com, I was able to locate the correct parts. It took approx. 30 minutes to remove the door and replace the shattered glass and bottom door trim. I wouldn`t hesitate to use this service for future use.The staff is friendly, helpful , knowledgeable and delivery is very fast. Thank you Martin Dobbins Read more
This Door Handle is an OEM part for GE ranges. It is the ergonomic component located externally on oven doors that allows for safe, comfortable opening and closing during cooking cycles. The handle is black in color and measures about 30 and 1/4 inches. Symptoms of a bad range door handle can include:
Expected causes are repeated heat exposure and grasping stresses over time that degrade mounting points and coating integrity.
Removed 2 outer screws that held on handle and 4 inner screws which held on handle to outer panel. Installed new handle with 4 screws and installed outer 2 screws with spacers which were in door. Read more
The Oven Sensor Kit is an OEM replacement part for GE ranges. It contains critical sensors that monitor the oven's temperature, functions, and safety features during the cooking process. An accurate and fully functioning sensor kit is essential for reliable oven performance.
Causes of a bad oven sensor kit can include failures in individual sensors due to prolonged use and heat exposure over time. Electrical issues affecting communication between sensors and the control board may also require sensor replacement.
Symptoms of a bad oven sensor kit include:
I was able to find the model number on the lower right hand side of the range/oven, a GE True Temp. I Googled it to find parts, and thought I had found the correct sensor, but was very pleased that the ApplianceParts sire suggested I check compatability again before the order. I would have ordered the wrong sensor kit other wise. I DID get the correct one order. It arrived on time. The tricky part was get the old sensor out without having to pull the oven/range combo out form the wall over... Read more
The Broiler Pan Kit is an OEM part for GE ranges. It serves as a secure platform for positioning meats, vegetables, and various foods directly beneath the broiler element, ensuring safe and efficient cooking. The pan is about 17 inches wide by 13 inches deep. Over time, wear and tear can affect broiler pans, causing issues such as flaking or stripping of the non-stick coating and the development of small ridges or holes that permit grease to drip down. Symptoms of bad broiler pans include:
This OEM GE replacement part is also compatible with select Hotpoint, RCA, and some Kenmore ranges
Fast delivery, great service Read more
The Terminal Block Assembly is an OEM replacement part for GE electric stoves. It acts as the central wiring connection hub, routing power to critical heating components such as the oven bake/broil elements and stovetop burners.
Symptoms of a bad terminal block include:
Causes stem from normal wear over time, as vibration and heat cycling can cause cracks or corrosion in the block's electrical connections.
This OEM GE part is compatible with Hotpoint, RCA, and some Kenmore electric stove models.
Removed damage terminal block ordered new block on line. when I received new block installed it stove works fine easy to replace. If I had not been home at the time when this happen it may had cause a big house fire. Read more