Jbp62b0k1wh Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (372)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Bake Element

4.9 (253)

By: Ge

Part Number: WB30X46987

The Bake Element is an OEM replacement part for GE electric ranges. It is the internal heating element located at the bottom of the oven cavity that provides heat for baking and convection cooking functions. This heating element measures 17 1/2 x 18 1/2 inches.

Causes of a bad bake element include failure due to normal wear and tear over extended use. Exposure to spills or splatters inside the oven can potentially damage heating coils or insulators.

Symptoms of a bad bake element are:

Inconsistent or uneven baking temperatures
Element does not heat up or turns red but puts out no heat
Buzzing/humming sounds from beneath oven cavity
Failure of oven to operate or preheat as expected

This OEM part is also compatible with ranges sold under the Hotpoint, RCA and some Kenmore brands.

Do-It-Yourself Stories from Customers like You Ge cafe gas range electric oven would not heat over @ 200f in bake mode John T. • Charlotte , NC • December 26, 2025

Visually inspected bottom heating element and found that it had failed. There was a @2" gap of missing element and burned debris below the damaged area. This was discovered 3 days before Christmas. 1. Open under oven storage drawer and look on the left inside frame frame for Model ID and Serial No. 2. Search on AppliancePartsPro.com for bottom heating element. 3. Ordered part on Sunday evening before Wednedsay Christmas - with expedited next day delivery. 4. Received order confirmation and... Read more

$92.95

Compare At:: $110.61
You Save:: $17.66

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (449)

By: Ge

Part Number: WB44T10010

The Oven Bake Element is an OEM replacement part for GE ovens. It is a crucial component that generates the heat necessary for baking and roasting functions within the oven cavity.

Dimensions:

18" side to side 19.50" from the mounting bracket to the back
2-3/4" between terminal centers
3" from the terminal to the back plate (calrod bent at a 45-degree angle)
Male Spade 1/4" terminals

Symptoms of a bad oven bake element include:

Uneven heating or hot/cold spots within the oven
Oven taking longer than usual to reach the desired temperature
Element glowing irregularly or not at all during the baking cycle

Causes of a bad bake element can range from simply burning out due to repeated use over time to physical damage caused by drips, spills, or impact.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Won't start

Do-It-Yourself Stories from Customers like You The radiant elements had been dead for years the bake element failed spectacularly on Thanksgiving Christine W. • Golden Valley , MN • December 04, 2020

It took a few of us. One to vacuum up the fire extinguisher residue. One to trip the breaker. One to provide light. One to clean out under the stove while it was pulled out. I disconnected the bake element. I needed help to disconnect one of them because it was very tight. I put the element into the oven and reconnected the right side, very easy. The left side fell back into the slot. Curses ensued. I removed the back plate and it was very easy to thread the left wire back into the oven and... Read more

$58.45

Compare At:: $91.24
You Save:: $32.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Sensor Asm

4.9 (124)

By: Ge

Part Number: WB21X22134

The Oven Temperature Sensor Assembly is an OEM replacement part for GE electric wall ovens. It is responsible for accurately reading the oven's internal temperature to provide precise temperature control and safe operation. Consistent and precise temperature readings are necessary for repeatable cooking results.

Symptoms of a bad temperature sensor include:

Inability to reach or maintain set cooking temperatures
Fluctuating temperatures causing inconsistent results
Error codes or fault messages related to temperature regulation
Potential safety concerns if temperatures run too high or low

Causes of a faulty sensor can be due to failures over extended usage, exposure to high heat cycles, or impedance changes due to dirt or mineral deposits. Precise temperature readings allow for confident cooking.

This OEM GE replacement sensor is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models.

This part fixes the following symptoms

Oven is too hot
Won't start
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Oven would not come to full temperature; unreliable heating; heating elements apparently ok. Stewart W. • Silver Spring , MD • May 07, 2022

My mother's GE range was not coming up to full heat (very far from it), and I was hearing a lot of relay-clicking coming from the control board. The heating elements seemed good. I suspected the control board was faulty, but there was a chance that it might be the (*much* less expensive) temperature sensor, so I ordered both from AppliancePartsPros.com (which got the parts to me very fast) so I could try the T-sensor first. After removing the doors and the back panel of the oven, and taking out... Read more

$15.26

Compare At:: $21.22
You Save:: $5.96

IN STOCK

Ships Today Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Ge part

Oven Control Board

4.9 (195)

By: Ge

Part Number: WB27X45466

The Control Oven TO9 is an OEM part for GE ranges. This part manages the oven's various functions, including temperature regulation, cooking modes, and timer settings. It serves as the central interface for the user to control the oven's operations, ensuring precise and reliable cooking performance.

Causes of a bad control module can include electrical surges, general wear and tear, or physical damage from impacts or spills.

Symptoms of a bad control oven module include:

Unresponsive or malfunctioning buttons and dials
Incorrect temperature readings or inconsistent heating
Display not functioning properly
Oven not turning on or shutting off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven control board failed to work after oven light shorted Glenn S. • Fairfax , VA • October 28, 2014

Replaced control board myself. Easy. Read more

$133.21

Compare At:: $158.52
You Save:: $25.31

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Cerama Bryte Cooktop Cleaner

4.9 (306)

By: Ge

Part Number: PM10X310

Cerama Bryte Cooktop Cleaner is a special cleaner designed specifically for ceramic glass and smooth-top cooking surfaces. It easily removes cooked-on foods, spills, or grease while leaving your cooktop looking like new. This product contains no abrasives or harsh chemicals, so it won’t scratch or damage your delicate cooktop surface.

To use the cleaner effectively, all you need to do is spray it onto the surface and then scrub it with a clean damp cloth. Use circular motions for best results. The product can also be used to remove baked-on foods from grates and drip pans on your stovetop. For tougher stains, let the cleaner sit for a few minutes before wiping it away.

Do-It-Yourself Stories from Customers like You Cooktop on my kitchenaid slide in range shattered word to wise don't place your pot tops face don on the stove the top formed a vacuum with the top and as the top cooled the vacuum increased to th Marc L. • North Branford , CT • May 16, 2016

VERY simple fix- you do not even have to pull the range out.. I ordered a new cooktop from Appliance parts Pros. The customer sales rep Alphonso was great and walked me through the general process. I could find no explicit instructions for the repair but I muddled my way through. The fix is simple on Kitchenaid/Whirpool slide in ranges. 1. Open the oven door and remove the two phillips head screws directly below the control panel that hold the panel down.2. Lift the control panel upward and... Read more

$14.78

Compare At:: $17.44
You Save:: $2.66

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (319)

By: Ge

Part Number: WB44K5012

The Oven Bake Element is an OEM part for GE ovens. This element is located at the bottom of the oven and is primarily responsible for providing the heat necessary for baking. When the oven is turned on, electricity flows through the element, causing it to heat up and glow red-hot. This bake element has ¼” push-on wire terminals. If you are unable to use your old wire connectors, order TJMA02875-1.

Symptoms of a failing oven bake element include:

Oven not heating up properly or taking longer to heat
Uneven cooking or baking
Element not glowing or only partially glowing during operation
Visible signs of blistering, cracks, or holes on the element

Causes of oven bake element failure typically include general wear and tear from regular use, exposure to high temperatures which can weaken the element over time, or electrical issues such as short circuits.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Oven is too hot
Won't start

Do-It-Yourself Stories from Customers like You Element burn into Richard D. • Summerville , GA • April 02, 2014

Took out old element,got part number and look for the cheapest price online, Appliance Parts Pro could not be beat... order part be number, easy to match, came in fast and put in element, only needed a 5/16 nutdriver to take it out and put it in,unpluged wires and bent just a little to keep one on left and one right from getting mixed up and pluged up new element and ran in the 2 screws,easy job, dont get no easier.. Thanks again Appliance Parts Pro Read more

$61.64

Compare At:: $73.97
You Save:: $12.33

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Range Surface Burner Control Switch

4.9 (77)

By: Ge

Part Number: WB24T10029

The Range Surface Burner Control Switch is an OEM part for GE ranges. This switch manages the temperature of the surface burners on your range, providing the ability to adjust the heat level. Whether you're simmering sauces or boiling water, the control switch ensures precise temperature management, enhancing your cooking experience.

The causes of a faulty burner control switch often include prolonged use leading to wear on the electrical contacts, exposure to moisture causing short circuits, or physical damage from impact or excessive force when turning the knob.

Symptoms of a bad surface burner control switch:

The burner not turning on or off
Inability to adjust the heat level, with the burner staying at one temperature regardless of the knob setting.
Intermittent burner function

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Large dual burner Frederick E. • Athens , AL • September 19, 2014

Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails. My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because... Read more

$37.26

Compare At:: $45.52
You Save:: $8.26

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Sensor Assembly

4.8 (60)

By: Ge

Part Number: WB21X5301

The Oven Sensor Assembly is an OEM part for GE ovens. This part monitors the oven's internal temperature, ensuring it matches the set temperature on the oven's controls. By accurately measuring the heat inside the oven, the sensor assembly communicates with the oven's control system to adjust the temperature accordingly.

Over time, the oven sensor can become faulty due to wear or damage, leading to inaccurate temperature readings. This can manifest as unevenly cooked food, longer cooking times, or an oven that fails to reach the desired temperature setting.

Symptoms of a bad Oven Sensor Assembly include:

The oven temperature is inconsistent with the setting
Food is not cooking evenly or as expected
The oven fails to heat to the set temperature
Error codes appearing on the oven display related to temperature regulation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Oven is too hot
Won't start
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Wasn't commng up to temperture put it at 350 would only get up to 250 Michael U. • Dix Hills , NY • April 21, 2014

Spoke to a parts pro and told them of the problem. there were 2 possibilieies from the explanation of what the parts do. onw could have been the Range oven igniter. that wasn't it beaacause the over was lighting fine. by process of illimination it was the Oven Sensor Assembly. Read more

$123.00

Compare At:: $179.02
You Save:: $56.02

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (101)

By: Ge

Part Number: WB44T10009

The Oven Broil Element is an OEM part for GE ovens. This element is located at the top of the oven cavity and is responsible for broiling, providing high heat for cooking tasks such as searing meats or browning the top of dishes.

Causes of a bad Oven Broil Element can include prolonged use, leading to eventual wear and tear, exposure to food spills and grease that can corrode or damage the element, and electrical issues that may cause it to fail prematurely.

Symptoms of a malfunctioning Oven Broil Element include:

The element not glowing red when the broil function is activated
Uneven cooking or browning of food
The oven taking longer than usual to broil
No heat production when the broil setting is selected

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Bake unit cracked and started glowing and sparking like the sun both elements replaced Steven S. • Somerset , KY • April 21, 2015

Easy fix. Both elements replaced while I was at it, so all new. Figured if one went the other was going to follow. CIRCUIT BREAKER OFF. Removed the back metal panel with my nut driver for the hex head screws. Note where the panel may slip under tabs for support. Remove slip on electrical connections on upper and lower elements. May need a pliers. (I did not want to just pull the element and the wires into the oven with the element and remove them there, like a technician would do. After 15... Read more

$54.36

Compare At:: $86.47
You Save:: $32.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Radiant Stovetop Element

4.9 (23)

By: Ge

Part Number: WB30T10132

The Radiant Stovetop Element is an OEM part for GE electric ranges. It is designed to provide consistent and even heat for cooking. This element sits beneath the glass or ceramic cooktop surface and heats up when electricity flows through it, allowing you to cook food efficiently.

Over time, the radiant stovetop element can wear out or become damaged due to frequent use, power surges, or accidental impact. A faulty element can affect cooking performance and may pose a safety risk.

Symptoms of a bad radiant stovetop element include:

The element not heating up
Uneven heating or hot spots
Visible damage such as cracks or burns
The element cycling on and off erratically

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Element radiant both were broken because of long time using Roy R. • Raleigh , NC • December 23, 2014

I easily unplugged the oven and unscrewed the top and those burners and replaced with new one. I plugged it back and tested them. both are working perfectly now. it was very easy and i did not have to pay for technician and labor. Read more

$54.64

Compare At:: $65.02
You Save:: $10.38

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Surface Burner Switch

5.0 (23)

By: Ge

Part Number: WB24T10146

The Surface Burner Switch is an OEM part for GE ranges and cooktops, designed to control the heat level of the surface burners. This switch allows users to adjust the temperature of the burners for boiling, simmering, or frying.

Causes for replacement may include electrical issues within the switch, physical damage, or wear and tear from regular use. A faulty switch can lead to cooking frustrations, potential safety hazards due to uncontrolled heat, and increased energy consumption.

Symptoms of a bad Surface Burner Switch include:

Burner not heating to the set level
Burner heating inconsistently or not at all
The switch feeling loose or failing to click into position

This genuine GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Burner wouldn't turn off Bryan S. • Saint Louis , MO • May 06, 2016

Replaced switch! Easy.... Read more

$30.71

Compare At:: $36.54
You Save:: $5.83

IN STOCK

Ships Today Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Ge part

Oven Rack

5.0 (38)

By: Ge

Part Number: WB48T10095

The Oven Rack is an OEM part for GE ranges, providing a sturdy and reliable platform for baking and roasting a variety of dishes. Its design allows for easy placement and removal from the oven, offering flexibility in cooking heights and accommodating different sizes of bakeware.

Causes of a bad Oven Rack can range from excessive weight being placed on the rack, exposure to high moisture levels leading to rust, or simply the age-related wear and tear that comes from regular use.

Symptoms of a bad Oven Rack include:

Warping or bending, which can prevent the rack from sitting level in the oven and affect cooking performance.
Rust or corrosion, which can weaken the rack's structure and potentially contaminate food.
Difficulty sliding the rack in and out, which may indicate damage or misalignment.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014

Orded rack by stove model number. fit perfect Read more

$64.35

Compare At:: $76.58
You Save:: $12.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.8 (29)

By: Ge

Part Number: WB30X46986

The Oven Broil Element is an OEM replacement part for GE ovens. It is located in the upper portion of the oven cavity and is responsible for generating intense heat for broiling foods. This element provides even heat distribution, ensuring proper cooking and browning of food during the broil cycle.

Over time, broil elements can wear out or fail due to frequent use, high temperatures, or electrical issues. A damaged element will affect the oven's ability to broil properly.

Symptoms of a bad broil element include:

The broil function not working or producing insufficient heat
Uneven browning or cooking of food during broiling
Visible damage, such as breaks or blisters on the element
Sparking or tripping of the circuit breaker when the broil setting is used

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You No problem Mohamed G. • Kissimmee , FL • October 19, 2014

I fallow instruction by watching video Read more

$79.95

Compare At:: $95.14
You Save:: $15.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Door Seal

4.9 (32)

By: Ge

Part Number: WB04T10022

The Oven Door Seal is an OEM part for GE ovens. This seal prevents heat from escaping during cooking, ensuring that the oven maintains a consistent temperature for efficient and even cooking.

A compromised Oven Door Seal can result from several factors, including normal wear and tear from regular use, exposure to high temperatures that degrade the material over time, or accidental damage such as tears or cuts.

Symptoms of a failing Oven Door Seal include:

Visible wear or damage to the seal
Heat escaping from the oven door during use
An increase in cooking times or uneven cooking results
A noticeable increase in energy consumption as the oven works harder to maintain temperatures

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Fire in oven and had to change the gasket on the door Sandra G. • Traverse City , MI • April 18, 2015

Looked at YouTube, took it off and figured out which one it was and ordered one from AppliancePartsPros.com. It was very easy. Just tucked the ends in with a screwdriver. Delivery from Appliance Parts was easy and fast. Read more

$69.95

Compare At:: $82.54
You Save:: $12.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Screws - 12 Pack

4.9 (75)

By: Ge

Part Number: WB1X500D

These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.

This part fixes the following symptoms:

Loose or wobbly parts or panels within the appliance's interior or exterior
Panels or components falling out of place, creating gaps or exposing internal parts
Unusual noises or rattling sounds during the appliance's operation

The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

$7.65

Compare At:: $9.10
You Save:: $1.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Jbp62b0k1wh Parts

Appliance Light Bulb

Bake Element

Oven Bake Element

Sensor Asm

Oven Control Board

Cerama Bryte Cooktop Cleaner

Oven Bake Element

Range Surface Burner Control Switch

Oven Sensor Assembly

Oven Broil Element

Radiant Stovetop Element

Surface Burner Switch

Oven Rack

Oven Broil Element

Oven Door Seal

Screws - 12 Pack