Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Je2160bf Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Microwave Power Cord Assembly
Genuine Ge part
By: Ge
Part Number: WB18X10219

Replace your microwave's damaged, frayed, or missing power cord assembly. This main power cord restores the electrical connection for safe operation.

More
$29.48

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Microwave Main Wire Harness
Genuine Ge part
By: Ge
Part Number: WB18X10220

Main wire harness for microwaves. Connects internal components to power and control systems. Replace if wires are frayed, connectors damaged, or burned.

More
$12.67

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Microwave Blower Wheel
Genuine Ge part
By: Ge
Part Number: WB26X190

Fix a microwave that's overheating or not cooling properly with this blower wheel replacement. Restores proper ventilation and prevents shutdowns.

More
$7.25

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Door Painting Asm
Genuine Ge part
By: Ge
Part Number: WB55X10622

 

More
$36.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Microwave Base Chassis
Genuine Ge part
By: Ge
Part Number: WB56X10380

Replacement base chassis for your microwave. This structural component supports the internal assembly. Order a new base if yours is cracked or damaged.

More
$29.48

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Guide (Wind), 1
Genuine Ge part
By: Ge
Part Number: WB06X10163

This replacement guide secures and positions a small component or harness inside the appliance to maintain proper alignment and prevent rubbing or binding. It restores correct routing where the original guide is cracked, broken, or missing. What it does:

  • Routes and holds wiring or small components to prevent chafing and interference
  • Keeps parts aligned for smooth operation and proper clearance
  • Prevents vibration noise caused by loose or rubbing components
  • Helps maintain factory fit where a damaged guide allows movement
What's included: One replacement guide Install notes:
  • Disconnect power to the appliance before beginning any repair to avoid shock or injury
  • Remove only the panels and fasteners necessary to access the damaged guide; keep hardware organized
  • Plastic guides can be fragile—use gentle leverage with appropriate tools to avoid breaking mounting tabs

More
$15.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Microwave High Voltage Capacitor Holder Clip
Genuine Ge part
By: Ge
Part Number: WB06X10407

Secures the high voltage capacitor in your microwave. Replace if broken, loose, or missing to prevent capacitor movement and electrical hazards.

More
$9.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Microwave Outer Cabinet Shell
Genuine Ge part
By: Ge
Part Number: WB56X10381

Outer cabinet shell for your microwave. Replaces damaged, dented, or rusted exterior housing. Essential when the cabinet is cracked or worn beyond repair.

More
$78.78

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Base
Genuine Ge part
By: Ge
Part Number: WB56X10687

 

More
$35.78

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Light Bu
Genuine Ge part
By: Ge
Part Number: WB36X951

This is a light bu, and it is made for microwaves. This is a genuine replacement part made by General Electric. This specific light bu has a voltage of 120 and a wattage of 25.A new light bu might be needed if the current one does not turn on when the microwave door is opened. The light bu should also be on when the microwave is in use so that the user may see the food during the heating cycle. It is common for light bu to burn out over time and they are very easy to replace when needed.This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with microwaves made by General Electric.

Do-It-Yourself Stories from Customers like You Lightbulb burned out on ge jes1384sf microwave   Allison F. • Irmo , SC • September 09, 2014

1) Take silver cover off of back/sides of microwave: remove 3 screws using "secure star" type wrench, then slide cover off. 2) Remove old lightbulb: slide white "plug" off of old bulb, then remove bulb and it's large black base by lifting it up while pulling back on plastic latch. Read more

More
Microwave Door Interlock Switch
Genuine Ge part
By: Ge
Part Number: WB24X824

Microwave stops heating but clock still works? This door interlock switch monitors door position and prevents operation when the door isn't latched securely.

Do-It-Yourself Stories from Customers like You Microwave would not heat.   Frank P. • Placentia , CA • October 23, 2020

Found that the Primary switch had broken again after abut 2 years since last one replaced. I ended up replacing all switches since I had it open and the cost for the switches are minimal except the primary and secondary. I re-krimped the conectors as they are rather loose fitting. Plugged it in and it works. Read more

More
Primary And Secondary Door Switch
Genuine Ge part
By: Ge
Part Number: WB24X823

The Primary and Secondary Door Switch is an OEM replacement part for GE microwaves. This part interrupts the power supply to the microwave when the door is opened.   

Causes of bad door switches can include regular wear and tear, electrical malfunctions, or physical damage from slamming the door.  

Symptoms of a bad Primary and Secondary Door Switch include:

  • The microwave not starting or operating intermittently
  • The appliance operating with the door open
  • The interior light not turning on or off appropriately

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Blown internal fuse on microwave   Jim S. • Cathedral City , CA • May 13, 2016

Inspected internal area, went to the web and looked at reasons for blowing internal fuse, found a burned electrical connector at the door switch, replaced it and the fuse and all is fine. Read more

More
Magnetron
Genuine Ge part
By: Ge
Part Number: WB27X10682

The Magnetron is an OEM replacement part for GE microwaves. It is responsible for generating the microwave energy used for cooking and heating food. Over time, magnetrons can wear down and become less effective. 

Symptoms of a bad Magnetron include:

  • The microwave not heating food, even though it turns on and the timer counts down
  • Unusual noises, such as a loud hum or buzz, during operation
  • Burnt smells or smoke emanating from the microwave
  • Error codes on the microwave’s display indicating a heating issue

Causes for a malfunctioning Magnetron can include a burnt-out magnetron, issues with the high-voltage diode that powers it, or problems with the control board that regulates its operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Microwave did not heat   Edgardo G. • Mobile , AL • August 09, 2016

First I watched some DIY videos for familiarization and safety. I bought a 28 Ohms resistor and rigged some wires and aligator clips and discharged the accumulated energy from the capacitor. Took out the magnetron and even when it showed good continuity I discarded it due to sings of been overheated. I reinstalled a new magnetron ( part # w27x10597 ) and a Diode HV Ass ( part # wb27x10682 ) for a total of about $ 143.00 including shipping cost. This price against a quoted price of $ 225.00... Read more

More
Guide Roller Assembly
Genuine Ge part
By: Ge
Part Number: WB02X10895

The Guide Roller Assembly is an OEM part for GE microwaves. This assembly includes the rollers and support mechanism that enable the microwave turntable to rotate smoothly. It is crucial for ensuring even cooking and heating by allowing the turntable to spin steadily during operation. The roller glide is a circular plastic ring, approximately 11 inches in diameter. I

Causes of a bad guide roller assembly can include regular wear and tear, accumulation of food debris, or physical damage from heavy items placed on the turntable. These issues can hinder the turntable's rotation, leading to uneven cooking and potential damage to the microwave.

Symptoms of a bad guide roller assembly include:

  • Turntable not rotating or rotating unevenly
  • Grinding or squeaking noises during operation
  • Visible damage or wear on the rollers
  • Food heating unevenly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Tray won't turn
See more...
Do-It-Yourself Stories from Customers like You The microwave glass turntable would not rotate because one of the little wheels had fallen off of the turntable support   Judith D. • Pittsburg , PA • September 28, 2014

I ordered a new turntable support.....Took the old one out & put the new one in.....and voila the glass turntable now rotates again!!! Read more

More
Micro Switch-Substitute
Genuine Ge part
By: Ge
Part Number: WB24X10103

The Microwave Door Switch is an OEM replacement part for GE microwaves. It is crucial for safety functionality as it detects when the door is properly closed and latched before initiating cooking cycles. The switch prevents operation if the door is ajar.

Causes of a bad door switch can include wear and grime accumulation over many years of use, impact damage, or failures in the plastic actuator or electrical components.

Symptoms of a bad door switch include:

  • The microwave failing to start cooking even with the door closed and latched
  • Error messages related to the door position being displayed
  • Inability to lock or properly sense the closed door position

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The ordered switch had burned contacts(internal failure)   Edward C. • Tampa , FL • December 03, 2016

With none of the cooking options working, and the display acting normal; I suspected door interlock issue. Using the contained schematic and wiring diagram; there is a picture of the entire door switch mechanism; with names and location of micro switches. It is best if you have some experience reading schematics and wiring diagrams(both are in the envelope, on top of the oven once the shell is off) BEWARE! TAMPER PROOF SCREWS ON CASING, AND HIGH VOLTAGE CAPACITOR, THAT CAN INJURE OR KILL. If... Read more

More
Door Latch (Lock)
Genuine Ge part
By: Ge
Part Number: WB06X10498

This door latch engages the microwave's interlock system when the door closes so the unit can operate only when sealed. Replacing a worn or broken latch restores proper door closure and reliable, safe startup.

  • Engages the door interlock switches to allow operation only when closed
  • Keeps the door secured and properly aligned
  • Helps resolve issues like "Open/Close Door" messages or the unit not starting
  • Typical symptoms include a door that won't latch, pops open, or requires pressure to start

What's included: 1 door latch Install notes:

  • Disconnect power at the breaker or unplug before servicing; microwaves contain high-voltage components
  • Access is typically through the door's inner trim; use non-marring tools to release clips and swap the latch
  • If over-the-range, support the unit and avoid twisting the door to maintain alignment
  • After replacement, verify the door closes smoothly and the oven recognizes the door as closed

Do-It-Yourself Stories from Customers like You Had power to my microwave clock on touchpad on timer on but it would not heat   Terence M. • Long Beach , CA • April 23, 2017

I had replaced the door switches a few years ago for the same problem. I figured it must be the door switches. Removed the cover & found one of the plastic clips on the door actuator (lock) that holds the top door switch in place was snapped off. (The actuator (lock) is the black plastic component that holds all the door switches). The top door switch was not being engaged when the door was closed because it was not secured in place. Ordered a new actuator (lock) from Appliacepartspros.com... Read more

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google