Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.
Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.
Symptoms of a bad Mounting Plate include:
Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.
Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.
Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replace your microwave's interior or underside light bulb when dim or burned out. Restores visibility for monitoring food. Confirm fit with your model.
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more
Connects microwave ventilation system to ductwork. Mounts at top or rear of unit. Replace if cracked, broken, or missing for proper airflow.
This damper was added to the outside vent duct line as an additional block against outside air intrusion. Under spousal orders I had just changed the microwave vent to the outside (the proper way to go, but much more difficult to accomplish) but then there was some "flowback" when the wind was pressing against the back of the house (westward facing), and I was ordered to reduce this flow before the winter arrived in full force. There is this same damper on the microwave unit itself, but I... Read more
Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.
I recently tackled a repair on my GE microwave (model JVM1440BD003, manufactured in 2003) to replace the light bulb sockets for the under-microwave lights. Since one socket was failing, I decided to replace both at the same time to avoid future issues. I used two WB08X10016 light sockets, which are the correct OEM parts for this model. The process started off smoothly thanks to a helpful installation video on the website. It made the job look straightforward: remove five screws to drop the... Read more
Carbon filter for range hoods and over-the-range microwaves. Dimensions: 2-1/2" x 11" x 3/8" (2.5 x 11 x 0.375). Rectangle shape. Removes cooking odors from cooking air. Replace when clogged, discolored, or every 6-12 months.
The oven is an old model discontinued by GE. I was able to find the filter on this website. And it turns out to be a good fit. Read more
Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-15/16" x 13-3/8" x 3/32" (5.9375 x 13.375 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
Replacing old filters Read more
Replaces a cracked, chipped, or broken glass turntable tray inside your microwave cavity. Typically damaged during cleaning or accidental impacts.
Pretty easy fix. Took out 7-8 screws to remove cover for access to light. 2 were security type screws so I had to run to the hardware store to buy a special screwdriver. One screw to remove the bulb. Read more
Replaces a cracked, melted, or burned microwave stirrer fan cover. Installs on top of the cavity to protect the stirrer mechanism from damage.
Used a flat head screwdriver to pop off old cover. Put new one back on. Keep the little plastic screw as the new cover does not come with one. Read more
Supports and rotates the microwave turntable during cooking. Replace if cracked, broken, wheels are missing, or rollers have flat spots or won't rotate.
I replaced 3 parts and its like brand new. Read more
The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards. Symptoms of a bad Lower Lever Switch include:
Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered the door switches, switch monitor and the lever switch. i replaced all of the parts and the oven started to function only to have it fail again after 2-3 operations. I eventually determined that the main fuse holder was not completely securing the fuse. i believe the combination of new switches and realigning the fuse clip solved the problem. Read more
Replaces a cracked, bent, or missing microwave exhaust damper flap. Installs on top of the unit to direct airflow and prevent drafts when not venting.
Microwave won't heat but runs? A faulty diode cable assembly prevents power conversion. DIYers report 10-minute fixes after diagnosing the issue.
Replaced the high voltage diode. You will need a special Torx screwdriver to remove the tamper resistant screws holding the cover. Once the cover is removed there should be a packet inside containing a schematic and detailed troubleshooting instructions. I used extreme caution to discharge the capacitor. The rest was simple. One screw and a push connector to remove and reinstall the diode. I fired it up and it was good as new. Thanks to AppliancepartsPros for the good guidance and extremely... Read more
Replace your cracked, broken, or missing microwave glass cooking tray. This rotating turntable supports food for even heating in your microwave cavity.
Ordered new tray from Appliance Pros Read more
Microwave not heating or making loud buzzing noise? The high voltage diode regulates power to the magnetron. DIY repair typically takes 30-45 minutes.
LG Help-line said probably a failed magnetron, but since out of warranty,referred me to an authorized LG repair service. They wanted $79.95 service call to come out & diagnose problem. I ordered replacement magnetron for less than cost of a service call, Plus the part was delivered next day! Works like new again. Happy wife = happy life! Notes for DYI-ers: 1.Be careful removing over the stove microwaves--get help,they are heavier than you think. 2.Unplug microwave for 48 hrs, carefully... Read more
Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-1/16" x 7-5/8" x 3/32" (5.0625 x 7.625 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
Slid in new ones Read more
The Thermostat is an OEM part for GE ovens. This critical component functions as a temperature sensor and controller within the oven, ensuring that the oven heats to the set temperature and maintains it throughout the cooking process. The thermostat prevents the oven from overheating by cycling the heat on and off as needed.
Symptoms of a failing thermostat include:
Causes of thermostat failure generally include age-related wear and tear, calibration issues, or exposure to extreme temperatures that can damage its internal components.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Went to Appliance Pros and found the part for my microwave. Web site was very easy to use. Ordered the thermal fuse and it was delivered in 2 days. Shipping was a a bit expensive, but can't complain with two day delivery. Replaced the failed part and the microwave now works great. It 1 1/2 hours, but I took my time. Needed one helper to remove the top screws. Handy-wife did it without a problem. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.