Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Traps grease, smoke, and cooking residue to protect microwave interior surfaces. Replace when damaged or heavily stained. Verify fit with your model.
Connects microwave ventilation system to ductwork. Mounts at top or rear of unit. Replace if cracked, broken, or missing for proper airflow.
This damper was added to the outside vent duct line as an additional block against outside air intrusion. Under spousal orders I had just changed the microwave vent to the outside (the proper way to go, but much more difficult to accomplish) but then there was some "flowback" when the wind was pressing against the back of the house (westward facing), and I was ordered to reduce this flow before the winter arrived in full force. There is this same damper on the microwave unit itself, but I... Read more
Charcoal filter traps cooking odors and grease in your microwave. Replace every 6 months when the reset filter light illuminates. Confirm fit with your model.
Ordered part from Appliance Parts Pros Read more
The Stainless Steel Door Assembly is an OEM replacement part for GE microwaves. This is the complete door assembly with a silk screen and the GE logo. Causes of a bad door may include damage from overly steamy cooking conditions or impact damage to the thin metal frame over time. Hinge mechanisms also experience wear from continuous opening/closing cycles. Symptoms of a bad door include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new door. Read more
Captures grease and airborne particles from cooking to maintain exhaust efficiency. Replace when discolored or clogged. Verify fit with your model number.
After looking at many different stores for a replacement part, finally looked on GE website - the part was rediculous - then found AppliancePartsPros.com & saved $20.00 on the part! It took a considerable amount of time to locate the part but once I discovered APP.com, took seconds to order & seconds to replace - very pleased! Read more
Replaces a cracked, melted, or burned microwave stirrer fan cover. Installs on top of the cavity to protect the stirrer mechanism from damage.
Used a flat head screwdriver to pop off old cover. Put new one back on. Keep the little plastic screw as the new cover does not come with one. Read more
Supports and rotates the microwave turntable during cooking. Replace if cracked, broken, wheels are missing, or rollers have flat spots or won't rotate.
I replaced 3 parts and its like brand new. Read more
The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards. Symptoms of a bad Lower Lever Switch include:
Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered the door switches, switch monitor and the lever switch. i replaced all of the parts and the oven started to function only to have it fail again after 2-3 operations. I eventually determined that the main fuse holder was not completely securing the fuse. i believe the combination of new switches and realigning the fuse clip solved the problem. Read more
The Thermostat is an OEM part for GE microwaves. This part regulates the temperature within the microwave, ensuring it operates within safe and efficient temperature ranges. It helps prevent overheating by monitoring and controlling the internal temperature, protecting both the appliance and the user.
Causes of a bad thermostat can include wear and tear over time, electrical malfunctions, or damage from power surges.
Symptoms of a bad thermostat include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
GE Microwave/Convection Oven. Removed case (carefully). Tested in-line power cord fuse with multi-meter. Fuse was good. Noticed a scorch mark on a wire connected to the oven cavity thermal fuse. The fuse appeared to have been overheated from too much movement in it's mount. Removed part from unit and used number on the part to order a new one. Installed new part, re-assembled, and unit works fine. Read more
The Micro Switch is an OEM part for GE microwaves. This part ensures the appliance operates only when the door is securely closed. It controls the electrical circuit, allowing the microwave to start heating food when the door latch engages the switch.
Causes of a bad micro switch can include wear and tear from frequent use, electrical issues, or physical damage from slamming the microwave door.
Symptoms of a bad micro switch include:
By replacing the switches. Read more
Replaces a cracked, bent, or missing microwave exhaust damper flap. Installs on top of the unit to direct airflow and prevent drafts when not venting.
Microwave won't heat but runs? A faulty diode cable assembly prevents power conversion. DIYers report 10-minute fixes after diagnosing the issue.
Replaced the high voltage diode. You will need a special Torx screwdriver to remove the tamper resistant screws holding the cover. Once the cover is removed there should be a packet inside containing a schematic and detailed troubleshooting instructions. I used extreme caution to discharge the capacitor. The rest was simple. One screw and a push connector to remove and reinstall the diode. I fired it up and it was good as new. Thanks to AppliancepartsPros for the good guidance and extremely... Read more
Traps grease and particles from ventilation air in your microwave. Replace when clogged or damaged for optimal performance. Verify fit with model number.
Took out the old ones and inserted the new ones, extremely easy Read more
Holds the light bulb in your microwave. Replace if bulbs keep blowing, socket is cracked, or light won't work. Confirm fit with your model number.
Tried to turn the microwave on, checked the outlet for power, check the breaker to see if it was tripped, all was in order. Removed the over the range microwave and pull the covers, Tested continuity with a multimeter for each of the 4 normally closed thermostats, found 2 bad (open). The upper 110 and the lower right 70. Ordered the needed parts as well as both lamp sockets and bulbs as they where broken too. The parts where correct and where delivered on time. (Also, in your tools needed or... Read more
Microwave tripping the breaker or won't power on? This thermostat protects against overheating. Common fix when the unit is dead. Moderate DIY repair.
Microwave tripping breaker when door opens or at startup? A failed monitor switch with welded contacts is the likely cause. 30-minute DIY repair.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.