Need Help?
Call
Structural support bracket that secures the microwave door handle. Replace if cracked, broken, or no longer holding the handle firmly in place.
After reading other folk's comments on making this repair, I got a good general idea of how to do this repair. Just go slow, take your time. Easier to do this job if door is just removed off the hinge pins.Be very careful with plastic trim frame on inside of door..fragile. I used a penknife to get it started. Read more
Illuminates the microwave cavity for viewing food during cooking. Replace when dim, flickering, or burned out. Confirm fit with your model number.
Tried to turn the microwave on, checked the outlet for power, check the breaker to see if it was tripped, all was in order. Removed the over the range microwave and pull the covers, Tested continuity with a multimeter for each of the 4 normally closed thermostats, found 2 bad (open). The upper 110 and the lower right 70. Ordered the needed parts as well as both lamp sockets and bulbs as they where broken too. The parts where correct and where delivered on time. (Also, in your tools needed or... Read more
Absorbs odors and filters grease from microwave exhaust. Replace when air quality diminishes or every 6 months. Verify fit with your model number.
Ordered the charcoal filter Lowe's told me to order. It was the wrong one and arrived damaged anyway. The AppliancePartsPros person I talked to gave me a credit for the wrong filter and sent me the right filter. It arrived in one day, plus it was almost $30 cheaper than the one Lowe's told me I needed. I couldn't be more pleased with the service and prices at AppliancePartsPros. Thank you. Read more
Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-1/16" x 7-5/8" x 3/32" (5.0625 x 7.625 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
After looking at many different stores for a replacement part, finally looked on GE website - the part was rediculous - then found AppliancePartsPros.com & saved $20.00 on the part! It took a considerable amount of time to locate the part but once I discovered APP.com, took seconds to order & seconds to replace - very pleased! Read more
Microwave tripping breaker when door opens or at startup? A failed monitor switch with welded contacts is the likely cause. 30-minute DIY repair.
By replacing the switches. Read more
Holds the light bulb in your microwave. Replace if bulbs keep blowing, socket is cracked, or light won't work. Confirm fit with your model number.
Microwave tripping the breaker or won't power on? This thermostat protects against overheating. Common fix when the unit is dead. Moderate DIY repair.
White microwave door assembly installs on front of unit. Replaces cracked, broken, or damaged doors with worn handles or shattered glass panels.
Ordered new door. Read more
Replace your cracked, broken, or warped microwave glass turntable tray. This rotating glass plate sits on the turntable support for even cooking.
Well, I managed to order the wrong part on my own. But after a call to customer service, my problem was solved. Very friendly and helpful staff. They emailed me a paid label for my return and got the replacement on its way. You just can't beat that. Very satisfied customer. Highly recommend if you're needing a replacement part. Read more
The Screw is an OEM part for GE microwaves. It secures the microwave handle to the door, ensuring a sturdy and reliable grip when opening and closing the microwave.
Causes of a bad screw can include stripping from over-tightening, corrosion from exposure to moisture, or general wear and tear over time.
Symptoms of a bad handle screw include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replace the complete microwave door assembly. No service parts are available for the door. Read more
If your microwave turntable won't spin or makes grinding noises, the turntable motor likely failed. Simple fix with basic screwdriver work.
I ordered the replacement motor. I unplugged the microwave. Then I simply removed the turntable spindle by lifting it up off the motor from inside the microwave. Next, I removed the 7 screws holing the bottom of the microwave in place. I lowered the bottom of the microwave, giving me access to the motor. I unplugged the two wires connected to the motor, removed the 2 screws holding the motor in place, then put the new motor in place and reversed the steps to complete the job. Read more
Replace your microwave's turntable support ring if cracked, broken, or worn. This rotating ring assembly sits beneath the glass tray on small rollers.
I ordered the new one from Appliance Parts Pros. It arrived in a week and all is well! Read more
This microswitch senses the microwave door position and controls the safety interlock circuits. Replacing a worn switch restores proper start/stop behavior so the oven only runs when the door is fully closed.
The Door Latch Board is an OEM part for GE microwaves. The latch board controls the door latching mechanism that secures the microwave door closed during operation. It works alongside the door interlock switch to initiate the removal of power to the magnetron when the door is opened, for safety during use.
Symptoms of a bad latch board include:
This replacement part is also compatible with Hotpoint and Profile microwaves.
We isolated the problem via YouTube videos to a faulty switch. We broke a piece of the switch holder when removing the switch and had to also order that part in addition to a new switch. Once everything was reassembled, the microwave worked again! Read more
If your microwave won't start or the fan won't shut off, a worn door latch is likely the cause. This replacement part secures your door properly.
Noted wear on the door latch and the latch board. Before it totally failed you could push on the door to make it operate. After disassembly I checked the three micro-switches, which checked good. I replaced the door latch easily with the help of a video, then replaced the latch board. Be sure to use the little toggle on the replaced door latch on the new latch. I had to adjust the position of the latch board to make the microwave operate properly. Read more
Turntable stopped rotating? This microwave turntable coupler connects the motor to the glass tray. Simple pull-up removal makes this a quick DIY fix.
Replaced coupler. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.