Jvm615 Parts

The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments. 

All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster. 

Symptoms of a burnt out refrigerator light bulb include:

• Dim or no light illuminating inside refrigerator shelves  
• Shadows and dark spots making it difficult to find items
• Higher utility costs from leaving the door open to see inside

This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models. 

The Air Filter is an OEM part for GE microwaves. This component is essential for trapping grease, smoke, and odors during cooking, maintaining a clean and safe kitchen environment. It is typically located above the cooking surface or within the microwave's ventilation system. The filter measures approximately 6.5 inches deep by 13.5 inches wide

Causes of a bad air filter can include clogging from grease and food particles, physical damage, or general wear over time. A compromised air filter can reduce the efficiency of the microwave's ventilation, leading to poor air quality and potential buildup of contaminants.

Symptoms of a bad air filter include:

• Reduced ventilation efficiency
• Increased smoke or odors during cooking
• Visible grease buildup on the filter
• The filter appearing damaged or excessively dirty

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.

Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.

Symptoms of a bad Mounting Plate include:

• Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.

• Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.

• Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Stirrer Fan Cover is an OEM replacement part for GE Microwaves. It is responsible for shielding internal mechanisms during operation. 

Causes of a faulty cover include normal wear over time, cracking, or warping due to exposure to high heat. 

Symptoms of a problematic cover include:

• Excessive noise or vibration during use
• Reduced or uneven heating performance
• Gaps exposing vulnerable electrical components
• Loose pieces that could fall into the microwave cavity

This GE replacement part is also compatible with Hotpoint, RCA, and select Kenmore models.

The Cooking Tray is an OEM part for GE microwaves. This tray sits on the turntable in the microwave and holds the food items being heated or cooked, allowing for even rotation and uniform cooking.

Causes of a bad cooking tray can include cracks or breaks from heavy use, exposure to extreme temperatures, or accidental drops.  

Symptoms of a bad cooking tray include:

• Cracks or chips on the tray
• Difficulty in rotating or the tray not rotating at all
• Unstable placement of food items
• Uneven cooking results

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Charcoal Filter is an OEM part for GE microwaves. It is an essential component located inside the microwave that helps filter odors and particles from the air during the cooking process. The charcoal filter traps smoke and grease molecules before they are released back into the kitchen. 

Causes of a bad charcoal filter can include exceeding the recommended replacement timeframe, exposure to excessively greasy air during cooking, or damage from moisture or impact.

Symptoms of a bad charcoal filter include:

• Unpleasant cooking odors lingering in the kitchen  
• Reduced effectiveness of ventilation and exhaust features
• Premature grease buildup inside the microwave
• Visible wear or cracks in the filter material

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. Replace your filter today to keep your microwave operating safely and minimize odors. 

The Thermostat is an OEM part for GE microwaves. This part regulates the temperature within the microwave, ensuring it operates within safe and efficient temperature ranges. It helps prevent overheating by monitoring and controlling the internal temperature, protecting both the appliance and the user.

Causes of a bad thermostat can include wear and tear over time, electrical malfunctions, or damage from power surges.

Symptoms of a bad thermostat include:

• Microwave not heating properly
• Overheating or shutting off unexpectedly
• Error codes related to temperature issues
• Inconsistent cooking times

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards.

Symptoms of a bad Lower Lever Switch include:

• The microwave not starting, indicating the door isn't recognized as closed
• The appliance operating with the door open, a clear safety hazard
• Unusual sounds or issues when attempting to start the microwave
• The need to apply extra pressure to keep the door closed

Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Microwave Grease Filter is an OEM part for GE microwaves. As an essential safety component, it traps smoke, grease, and residue from foods prepared using the microwave's convection cooking functions. Proper filtration prevents dangerous buildup on interior surfaces.

Symptoms of a bad microwave grease filter include:

• Excess grease or burnt residue inside the microwave cavity
• Unpleasant odors emitted from the ventilation system
• Reduced or no ability to filter combustion byproducts

Causes can be damage from cleaning chemicals or excessive heat warping the filter material over time. Regular cleaning helps filters maintain effectiveness.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This damper is the exhaust vent flap for a microwave. It opens to let air flow out while venting and closes when the fan is off to help prevent drafts, moisture, and debris from entering the unit.

• Directs airflow from the microwave to the outside or recirculation duct
• Helps prevent backflow of air and odors when the fan is off
• A common cause of rattling noises, poor venting, or backdrafts during operation
• Replaces a warped, stuck, or missing vent flap to restore proper ventilation

• Disconnect power before servicing
• Access is typically from the top or rear once the unit is removed or tilted forward
• Note airflow direction and hinge orientation before removal
• Ensure the flap moves freely after installation and proper airflow

The GE door handle is an OEM replacement part for GE microwaves. This white handle enables safe and convenient access to the interior cooking compartment.

Causes of a handle becoming defective can be normal wear and tear over extended and repeated use. Prolonged exposure to heat or impacts may also damage the structural integrity of the handle.

Symptoms of a bad handle may include:

• Looseness, wobbling
• Detachment that compromises secure closure of the microwave door

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Thermostat is an OEM part for GE ovens. This critical component functions as a temperature sensor and controller within the oven, ensuring that the oven heats to the set temperature and maintains it throughout the cooking process. The thermostat prevents the oven from overheating by cycling the heat on and off as needed. 

Symptoms of a failing thermostat include:

• Oven not reaching the desired temperature
• Overheating beyond the set temperature
• Uneven cooking or baking results
• Oven temperature fluctuating more than usual

Causes of thermostat failure generally include age-related wear and tear, calibration issues, or exposure to extreme temperatures that can damage its internal components.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Capacitor is an OEM part for GE microwaves. This component stores and releases electrical energy to help power the microwave's high-voltage circuits, essential for the proper functioning of the appliance.

Over time, capacitors can fail due to electrical surges, overheating, or degradation of the internal components. When a capacitor goes bad, it can affect the microwave's ability to generate heat and operate efficiently.

Symptoms of a bad Capacitor include:

• The microwave not heating food
• Unusual humming or buzzing noises
• The microwave shutting down or not starting

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Turntable Ring Assembly is an OEM part compatible with GE microwaves. It consists of the circular ring component that houses the turntable mechanism. This assembly is crucial for rotating food evenly during the microwave cooking cycle.

Causes of a bad turntable ring assembly can include wear and tear from years of use, damage from spilled or baked-on food remnants, or cracks/breaks from accidental impact. 

Symptoms of a bad assembly include:

• The turntable no longer spins or rotates unevenly
• Excessive noise or grinding sounds coming from beneath the turntable 
• Cracks or breaks in the plastic ring housing

This GE replacement part will restore optimized cooking performance by enabling even heat distribution. It is designed to directly replace the original component. This OEM part is also compatible with some Kenmore microwaves. Maintaining your microwave includes periodic replacement of consumable parts like the turntable ring.
 

This is a turntable motor intended for use with microwave ovens. A turntable motor is required to rotate the turntable so that food is heated evenly. With time, because of misuse, or as a result of accidental damage, the turntable motor may malfunction or fail. To continue using the appliance efficiently, the turntable motor must be replaced.The primary indication that there is something wrong with the turntable motor is a tray that doesn't spin. When replacing the turntable motor, it is essential to disconnect the machine from the power source. Wear gloves for safety. The part can be replaced easily by removing screws from the back and side of the microwave, which allows the panel to swing open. Take the wires of the old motor and reconnect them to the new one.This turntable motor is an authentic OEM replacement part. It is sold as an individual unit. The turntable motor is made of high-quality, durable materials. The component comes sourced directly from the manufacturer. The replacement part can be installed in several models of microwaves. It is compatible with appliances produced by General Electric, RCA, and Hotpoint brand appliances.

The Glass Tray is an OEM part for GE microwaves. This tray holds food items and rotates them during the cooking process to ensure even heating. It fits into the turntable mechanism, allowing the food to be cooked uniformly.

Causes of a bad glass tray can include cracks or breaks from accidental drops, chips from heavy or sharp objects, and wear and tear from regular use.  

Symptoms of a bad glass tray include:

• Cracks or chips on the glass surface
• The tray not rotating properly
• Unusual noises during operation
• Uneven cooking or heating of food

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.