Need Help?
Call or text
Fix a dishwasher dispenser that won't open, close, or is leaking detergent. This dispenser releases soap and rinse aid at the right time. 45-minute DIY.
As a homeowner, I love that I can just type my model number into Appliance Parts Pros website and find a listing/diagram of the entire unit. So when my dispenser on my dishwasher broke, I just ordered a new one. I use You Tube to watch videos on the specific repair, and then VOILA! I do the repair myself, saving at least a hundred dollars in a repair persons service call charge! While this repair was for my dishwasher, I've also fixed my washing machine, dryer, and steam humidifier. Read more
Replace your cracked, rusted, or broken dishwasher tine row. This adjustable row installs in the upper or lower rack for flexible dish loading.
Order parts and replace. When removing attachments, do them one at a time and install them on new rack as you go. Watch for the small release tabs on the attachments (baskets, rollers and tine holders), "gently" put pressure to release; remember these units have been in hot water and they are brittle. Read more
Replacement right adjuster housing for dishwasher upper rack. Holds and supports the right side height adjustment mechanism. Replace if cracked or worn.
I bumped into my KitchenAid dishwasher and the upper rack adjuster cracked. There was already a crack on the notch of the housing where the handle (lever) sits. In addition, the positioner popped out and I couldn't find it. So, I bought the three parts from AppliancePartsPros online. It arrived in about a week. The repair was fairly simple, but it still took about 45 minutes because I didn't want to crack the assemblies. For the housing, use a small slotted screwdriver to carefully... Read more
Reduce noise and prevent heat loss with this dishwasher toe panel insulation. Replace when soiled, damaged, or missing. Adhesive-backed for easy install.
Ordered new insulation from AppliancePartsPros. It was delivered quickly and easy to install. Read more
Replacement door balance spring for dishwashers. Provides tension so the door opens smoothly and stays in position. Needed when spring is rusted, broken, or stretched causing door to slam open or fall without resistance.
I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them. Read more
Replaces broken, cracked, or missing upper spray arm in your dishwasher. Distributes water to clean dishes in the upper rack during wash cycles.
Funny, my husband did it. We have a service contract but you know how long that still takes. So he found the part at the bottom of the dishwasher and it had a number on it. He went to your site and and found the part. Yes it was a little cheaper else where like everything else but what the other sites didn't have he said was the video on how to do it. He explained he felt that takes money to produce so the few dollars more were worth it to him and he can be cheap. We had it in two days like you... Read more
Fixes no heat during drying, wet dishes, or blinking sanitized light. This safety thermostat cuts power if water overheats. Moderate DIY repair.
Replaced sump, wash pump, drain pump, diverter motor, and thermostat. Read more
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Touch up paint Read more
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of variou
Replaced It With New One Read more
Delivers water from supply line to dishwasher tub. Replace if cracked, leaking, chewed by rodents, or damaged during installation or moving.
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to... Read more
Flexible tube connecting the drain pump motor to the sump in your dishwasher. Replace if cracked, leaking, or damaged to restore proper water drainage.
It was a learning experience. First I turned off the power! I removed the lower kick plate, disconnected the drain hose and electrical connectors. Then removed the discharge pump and heat sensor then loosened the 4 hold down arms/clamps. Then I opened the door and pulled the base up from the inside. Now to remove and replace the Pump Motor. Then reverse the process. If I were to do again, I'd pull the dishwasher out and lay it on its back. Read more
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the i
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more
Secures the dishwasher upper rack to the slide rail and allows height adjustment. Replace if the clip is cracked, broken, or won't snap onto the positioner.
Ordered numerous replacement parts. Started with the tracks which required pulling the washer out of the cabinet to reach the screws. Pushed it back in and re-secured. Then stared on the rack and replaced the rack adjusters and various clips. Everything is straight forward and easy to replace. I originally called a local repair place to have them repair it. They came out and said they needed to order parts and they would call back. A week went by and I followed up with them. Had to leave... Read more
The Water Level Float is an OEM part for Whirlpool dishwashers. It helps regulate the water level within the dishwasher by rising with the water level and signaling the control board to shut off the water inlet valve when the appropriate level is reach
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down. Read more
The Retainer is an OEM replacement part for Whirlpool built-in dishwashers. It is a plastic clip located within the lower wash arm assembly. This retainer securely holds the pivot hub bearing and ensures smooth oscillation of the lower wash arm during
White retainer clip secures the kickplate at the bottom of your dishwasher. Replace if broken, cracked, missing, or lost to keep kickplate firmly attached.
Repair was easy. Just slotted the new parts in and they fit and worked fine, Read more