Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Burned or damaged terminal block causing power loss? This connection point fixes arcing, sparking, and burnt wire issues. DIY repair with basic tools.
I determined the hidden bake element below the oven cavity was not working, because the bottom of the oven was cold during normal use. If you have a built-in microwave + oven combination (mine is KitchenAid Model No. KEMS308SSS05), this is a difficult repair. The engineer who designed this oven should be invited to succeed elsewhere. It is impossible to access the bake element from the inside of the oven, so the How To video associated with this part will not help you. I had to remove the... Read more
White acrylic spray paint for appliance exterior touch-ups. Restores worn, chipped, or scratched surfaces on refrigerators, ranges, and more. 13 oz can.
Replaced It With New One Read more
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Touch up paint Read more
Replacement inner door glass for your oven. Installs inside the door frame for viewing food while cooking. Order if cracked, shattered, or broken.
All I had to do is take off 4 screws from the top panel that holds the glass. 2 of the 4 are at the inner front of panel of the door and remaining 2 are on either side. Once that panel is removed you place the small 4 brackets on each hole then pop the glass in then put the black panel in then screw back all 4 screws and you start cooking Tango chicken. Read more
Replace your wall oven door cavity gasket when heat escapes or condensation appears. Creates an airtight seal for optimal cooking temperatures. Confirm fit with your model number.
Bought a replacement gasket. Read more
Fix slow preheating or uneven baking with a new bake element. This heating component generates consistent heat throughout your oven cavity. DIY-friendly repair.
I replaced the bake element in the bottom of the unit. Read more
If your oven won't heat after self-cleaning or stopped working suddenly, the high limit thermostat likely tripped. Moderate DIY repair, about 1-2 hours.
Replaced the thermst-fix and the thermal fuse oven now works great Read more
Oven won't turn on after self-clean cycle? A blown thermal fuse is the likely cause. This safety part cuts power when overheated. Moderate DIY repair.
Replaced fuse. It took much longer to get the oven out of the wall to access the fuse and replace the front panel than to do the repair. This fuse failed at the end of the cleaning cycle for the bottom oven and left the door locked because the open fuse removed the 120v power from the control board. The locked door made it impossible to remove one of the screws holding the wall oven in place. However, after I ground off the head of the screw behind the edge of the locked door I was able to... Read more
Replacement mounting screw for securing components and housings in place. Order a new screw if yours is stripped, missing, or damaged during repairs.
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more
Heating element not working? This mounting screw securely fastens the heating element in place. A simple DIY repair that takes about 20 minutes to complete.
We ordered the part and one extra screw(which we didn't end up using). If possible take door off your oven for easy access and have lighting source to see well. Taking part out was easy. Putting back in was more difficult because you have to match up two layers of parts in our oven. The broiler coil and the broiler shield above it. We used small craft clothes pins to keep wires from going behind the built in oven. We used a small diameter screw driver to match up holes before putting... Read more
Broiler not heating or browning unevenly? This upper broil element restores intense top heat for searing and finishing. Moderate DIY repair.
Replacement broiler pan set for ovens. Includes pan and insert to catch drippings during broiling. Order if your original is missing, warped, or damaged.
I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more
Oven overheating or not holding temperature? A faulty temperature sensor is often the cause. This probe monitors oven cavity heat for accurate baking.
Replaced two sensors(one in each oven). So far, seems to be heating ok. I was worried that the temperature control would have to be replaced. Had trouble getting one of the screws holding the sensor, to unscrew. Ended up cutting the screw, other than that, the operation is pretty straight forward. The oven does have to be removed from the cabinet. Lucky the power wire had enough lead to pull all the way out. Remember to cut power at circuit first. Saved probably $300.00 doing it myself. Read more
Probe indicator stays on or won't light when plugged in? This meat probe monitors internal food temperature. Easy DIY fix with video guide included.
Purchased the parts on-line. The website is very easy to use and found it easy to identify the parts needed. Read more
Replacement mounting screw for washer drum baffles. Secures baffles to drum interior. Order if original screw is stripped, lost, or corroded during repair.
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more
Replace your bent, missing, or stuck oven rack with this sturdy metal shelf. Slides on side rails for adjustable height positioning inside the cavity.
Replaced old oven racks. Read more