Kgsa906 Parts

Found Appliance Pros online and they carried the bulb I needed. I ordered on Monday and got it the next day. I bake a lot so it is really annoying when the bulb burns out. My oven actually has two of these bulbs and they are expensive. Read more

Replacing the Door Gasket is very easy and will take about 2-3 mins per door. Simply remove the Gasket Retainer (1 screw), and pull off the old Gasket. Install the new gasket by simply pushing the gasket clips into the holes where the old clips came out from. Be sure to start gasket at the first hole either side of the Gasket Retainer and work your way around. Reinstall Gasket retainer. The Door Insulation is a very involved repair, and best to follow specific repair manual instructions. Door... Read more

The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process. Read more

I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more

• Touchpad does not respond

I looked online for possible repair solutions when the range would not turn off. I found that the membrane switch goes bad on these models. I looked online for available parts and Appliance Parts Pros had the item in stock. I ordered and it was here the next day. After receiving the part, again, I looked online for how to replace the membrane switch and youtube video walked me through the steps. It took about an hour and now it works like new. Read more

Had a repair person come into my home and he suggested a different ($200) part, labor would have been another $125. Seeing that it would cost almost $400 fix it, we were just going to buy a new oven. The next day, I called Appliancepartpros and spoke to someone from their support. I explained the symptoms and they suggested this $50 part and told me that I could return it, even if it didn't work. Figured I had nothing to lose. Based on the diagram they sent, I was able to fix the oven (I'm... Read more

• Door won't open after self cleaning cycle

Based on information found at AppliancePartsPros, I determined that the it was most likely the thermostat (thermal fuse). I removed the rear panel and tested the fuse for continuity and it was bad. I used a jumper wire to bypass the fuse and plugged the range back in. The panel turned on and the oven unlocked. I then removed the thermostat and looked up the replacement part and ordered. Read more

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

Called up AppliancePartsPros and ordered the part. My husband took the oven door apart and had it replaced within 15 minutes. Read more

I recently shattered the outer glass on my Whirlpool oven door. (Side note for lesson learned...don't swat at a fly with a broom when its on the oven door. I didnt swing hard just a love tap but thats all it took ha ha) The toughest part of the fix was removing the broken glass as it had shattered into hundreds...no thousands of pieces. Thankfully it was taped on the inside and that held some of it together. I placed the door in our garbage can and put on a pair of gloves with a scraper to... Read more

I am a 78year old woman and 40 years ago I replaced the belt on a dryer but could not even consider such a feat today. I ordered the parts from you on line and also found the video that you very nicely have attached to the site and I saved this under my favorites. The baffles arrived within 3 days and due to my age was unaware that dryers now come in two sizes and the ones I ordered were for the smaller but same model. I worked with a very nice customer service agent on line who got me the... Read more

I replaced both igniters (WP part #s 8191123 and WP8054129) but no luck. I should've tested mine first for continuity b/c I learned it's a pretty easy test with a multi-meter. Next, I tested the high-limit thermostat fuse (WP part # 8300802) b/c this often blows, especially after using the self-cleaning function. This part also tested fine so APP suggested the gas valve (part # WP9763716). This is the part that fixed my oven. I'm not technical so I didn't understand how the burners could... Read more

My appliance is a Whirlpool Accubake Wall Oven, single door. After using the tech sheet and measuring the ohms of the two micro switches that sends signals when the door is shut and locked, determined the lock was faulty. Pretty simple to change, the most difficult part was taking the digital face off of the oven without damaging the control board. TIP: take a picture of the latch switches to ensure you put the correct wires on the correct switch. Read more

After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a... Read more

Replaced It With New One Read more

Discover that drawer glide and one of the oven front legs were broken, found the parts at ApliancePartsPros and got my range as good as new now! Read more