Kitchenaid Kera807pss00 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4451722
Fixes heat loss and hot exterior oven door surfaces. Thermal insulation maintains internal temperature. Advanced repair requiring door removal, 15+ min.
Do-It-Yourself Stories from Customers like You
Heat loss due to old worn door gasket door insulation damaged Raymond M. • Mundelein , IL • February 09, 2016
Replacing the Door Gasket is very easy and will take about 2-3 mins per door. Simply remove the Gasket Retainer (1 screw), and pull off the old Gasket. Install the new gasket by simply pushing the gasket clips into the holes where the old clips came out from. Be sure to start gasket at the first hole either side of the Gasket Retainer and work your way around. Reinstall Gasket retainer.
The Door Insulation is a very involved repair, and best to follow specific repair manual instructions. Door...
Read more
More
$82.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9755542
Probe indicator stays on or won't light when plugged in? This meat probe monitors internal food temperature. Easy DIY fix with video guide included.
Do-It-Yourself Stories from Customers like You
We purchased home and these parts were missing Mark P. • Little Egg Harbor , NJ • October 23, 2015
Purchased the parts on-line.
The website is very easy to use and found it easy to identify the parts needed.
Read more
More
$75.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4448933
The Gasket Retainer is an OEM part for Whirlpool ovens. It secures the oven door gasket in place, ensuring a tight seal that prevents heat from escaping during cooking. This helps maintain consistent cooking temperatures and improves energy efficiency.
Causes of a bad oven gasket retainer can include wear and tear from repeated use, heat damage, or accidental impact that causes the retainer to break or become misshapen.
Symptoms of a bad oven gasket retainer include:
- The oven door gasket not staying in place
- Heat escaping from the oven, leading to uneven cooking
- Visible damage or deformation of the retainer
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Heat loss due to old worn door gasket door insulation damaged Raymond M. • Mundelein , IL • February 09, 2016
Replacing the Door Gasket is very easy and will take about 2-3 mins per door. Simply remove the Gasket Retainer (1 screw), and pull off the old Gasket. Install the new gasket by simply pushing the gasket clips into the holes where the old clips came out from. Be sure to start gasket at the first hole either side of the Gasket Retainer and work your way around. Reinstall Gasket retainer.
The Door Insulation is a very involved repair, and best to follow specific repair manual instructions. Door...
Read more
More
$5.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: 4451175
Oven won't heat or bake properly? This bake element kit restores even heating for baking and roasting. Located at oven bottom. DIY repair under 1 hour.
Do-It-Yourself Stories from Customers like You
Oven had a burnt out hidden bake element and was not heating properly Christopher A. • Auburn , AL • April 23, 2017
Following the instructions that I received through the helpful research of the APP staff, I disconnected the power, disassembled the back of the oven, and accessed the hidden element. This involved bending parts of the sheet metal and cutting the insulation, so I was very apprehensive about doing this. Once I exposed the compartment that contains the element, I had difficulty extracting the old part and was really nervous about pulling hard to extract it - until I saw the damaged element. It...
Read more
More
$118.63
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4173175
120-130 volt, 15 watt.
Do-It-Yourself Stories from Customers like You
Oven light burned out and being that it was an unusual design the replacement can not be found in nearby stores Janet R. • Greenville , WI • January 15, 2016
Found Appliance Pros online and they carried the bulb I needed. I ordered on Monday and got it the next day. I bake a lot so it is really annoying when the bulb burns out. My oven actually has two of these bulbs and they are expensive.
Read more
More
$48.46
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400832
Mounting screw for securing trim, hinges, drawer guides, and interior components. Replace if missing, stripped, or broken during repair or maintenance.
Do-It-Yourself Stories from Customers like You
The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process.
Read more
More
$7.56
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: W10491987
This foam seal fits between mating parts to create a tight barrier that helps prevent leaks and rattling. Replacing a worn or missing seal restores proper sealing and helps keep your appliance running quietly. What it does:
- Creates a compliant gasket between components to limit air or moisture passage
- Helps dampen vibration and reduce rattling/buzzing where parts meet
- Helps maintain proper airflow or fluid routing as designed
- Typical symptoms include leaks, condensation/frost near a joint, or new vibration noises
What's included:
Install notes:
- Disconnect power; turn off the water supply before service
- Note the original seal's routing/orientation before removal
- Clean and dry all mating surfaces; remove old foam and residue
- Install without stretching or over-compressing; ensure even contact with no gaps
Do-It-Yourself Stories from Customers like You
Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary.
IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)...
Read more
More
$5.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$21.46
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4449809
Replacement mounting screw for securing panels, brackets, covers, and trim pieces in appliances. Restores fit when hardware is missing, stripped, or lost.
Do-It-Yourself Stories from Customers like You
Broken outer glass on lower oven door James F. • Durham , NC • May 03, 2015
I recently shattered the outer glass on my Whirlpool oven door. (Side note for lesson learned...don't swat at a fly with a broom when its on the oven door. I didnt swing hard just a love tap but thats all it took ha ha) The toughest part of the fix was removing the broken glass as it had shattered into hundreds...no thousands of pieces. Thankfully it was taped on the inside and that held some of it together. I placed the door in our garbage can and put on a pair of gloves with a scraper to...
Read more
More
$7.94
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9757706
Inner glass pane for oven door window. Installs inside the door frame. Replace if shattered, cracked, or broken to restore safe viewing and thermal insulation.
Do-It-Yourself Stories from Customers like You
Inner glass door shattered! Bethany H. • Seneca Falls , NY • September 21, 2015
Called up AppliancePartsPros and ordered the part. My husband took the oven door apart and had it replaced within 15 minutes.
Read more
More
$92.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196068
Broken indicator light lens? This red lens covers the control panel light opening, restoring visibility and protection. Easy DIY fix in under an hour.
Do-It-Yourself Stories from Customers like You
The indicator light for the burner was broke John V. • Liberty , TX • March 26, 2016
I ordered a red lens and replaced it
Read more
More
$8.56
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196037
Adjustable front leveling leg threads into the base corner of your range to raise or lower the unit. Replace if broken, cracked, or missing to level your range.
Do-It-Yourself Stories from Customers like You
Bought a used stove needed cosmetic fixes. Wendy G. • Defiance , OH • November 09, 2023
Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled.
Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly.
Read more
More
$46.35
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9756595ES
Range membrane touch pad with control buttons located on the front panel. Replace if buttons are unresponsive, cracked, or worn. Includes layers and switch.
This part fixes the following symptoms
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
The off button didn't work Andrew T. • Oshkosh , WI • January 16, 2015
Unplugged the stove. I had to remove mounting screws from under front panel. Then Remove the side panels in order to remove the trim. Under the trim there are two gold screws that hold the front panel in place. Unplug the membrane switch and remove the 4 screws that hold it in place. mount the new membrane switch and use plug it in. Then replaced all screws. Plugged stove back in.
It took me about 45 minutes to find the final screws hidden under the trim under the side panel. Also make...
Read more
More
$245.95
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$33.36
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$7.56
IN STOCK
Most orders arrive by Tuesday, November 24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760769
Oven not heating evenly or convection mode not working? This rear convection element restores even baking and roasting. 20-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Oven not heating. Randy M. • Fort Wayne , IN • September 10, 2019
Whirlpool convection oven. Access to convection element from inside. Three screws to remove plate covering fan blade. Then one screw to remove element bracket. I placed tape over the holes with the wires so they wouldn’t pull back into the panel. Remove old element at tabs and replace. Very easy fix. Removing door to oven made it easier to get to but not necessary.
Read more
More
$154.38
IN STOCK
Most orders arrive by Tuesday, November 24