Kitchenaid Kssc36qts00 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198608
Ice bin won't release or latch broke? This ice bin latch spring provides tension to secure the ice container properly. Easy 10-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Lower ice bin broken Dennis B. • Wichita Falls , TX • March 30, 2020
Easy to remove the metal parts from the old bin. The only problem was that the screw that holds the adapter has red thread locker and screwdriver rounded off the head of the screw. Drilled the screw and heated the screw to loosen the thread locker and used an ease out to remove the screw.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10181323
Fix hot refrigerator walls or a non-spinning condenser fan. This motor drives airflow across coils to remove heat. Easy DIY install in 1-2 hours.
Do-It-Yourself Stories from Customers like You
The outside of my frigidare refrigerator felt hot near the door gasket on both side of the freezer Trent S. • Bethlehem , PA • May 27, 2014
I found several "threads" on my google search which indicated that it might be caused by a non-functional condenser fan. I removed the back bottom panel and voila, the fan was not spinning even though the compressor was running and felt very hot. If I spun the blades, the fan would run, but as soon as the compressor shut off, it would not start up again without my help. The replacement part was easy to find at AppliancePartsPros.com. I ordered it and had it within 48 hours. I didn't even need...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2318054
Fix a refrigerator that won't cool, clicks repeatedly, or has a blank display by replacing the main electronic control board. Moderately difficult repair.
Do-It-Yourself Stories from Customers like You
Kitchenaid ksso48qtb00 refrigerator with intermittent ice and water dispenser issues on the front panel Garrick S. • Palisade , CO • February 20, 2026
I replaced the ice door motor with new hardware, circuit board on touch panel display then the main ECB on top in the doghouse. It finally came to life and started working! No issues with the front panel and everything works as it did!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196483
Replacement support stud that holds refrigerator shelves securely in place. Needed when original peg is broken, cracked, or missing from shelf wall.
Do-It-Yourself Stories from Customers like You
Broken shelf and drawer. Regina M. • Yardley , PA • November 10, 2017
Myself
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2266802
Refrigerator won't turn on or stays running constantly? This power disconnect switch controls main power to your unit. Easy DIY replacement fix.
Do-It-Yourself Stories from Customers like You
Switch was damaged Michael K. • Burbank , CA • April 07, 2015
Replace old damaged switch with new one
ordered new part on Friday came by FEDEX next day (Saturday)
works great
thanks :)
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10131132
Replaces the small hinged cover on your refrigerator door's dairy or utility bin. Install when original door is cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
My door was broken Elixandra T. • Plantation , FL • July 29, 2016
Ordered the part and came out perfect.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10205979
This ice door motor drives the dispenser flap that opens for ice dispensing and closes to seal the chute. Replacing a weak or failed motor restores smooth door movement and helps prevent warm air and moisture from entering the freezer. What it does:
- Actuates the ice chute door during dispensing and returns it closed for a proper seal
- Helps reduce frost, condensation, and ice clumping around the dispenser
- Can address ice not dispensing due to the door not opening/closing
- May resolve clicking or grinding noises from the dispenser area
What's included: One ice door motor. Install notes:
- Unplug the refrigerator before servicing; wear cut-resistant gloves
- Remove dispenser trim/control panel to access the ice door assembly; handle wiring carefully
- Note linkage and wire orientation before removal to ensure proper reassembly
- After installation, test the dispenser to verify the door opens/closes and seals the chute
Also known as: dispenser door motor, ice chute door motor.
Do-It-Yourself Stories from Customers like You
Kitchenaid ksso48qtb00 refrigerator with intermittent ice and water dispenser issues on the front panel Garrick S. • Palisade , CO • February 20, 2026
I replaced the ice door motor with new hardware, circuit board on touch panel display then the main ECB on top in the doghouse. It finally came to life and started working! No issues with the front panel and everything works as it did!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10277449
Ice maker not producing cubes or freezing up? This assembly automatically freezes water and ejects ice on a controlled cycle, restoring consistent ice.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281163
Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.
Do-It-Yourself Stories from Customers like You
Whirlpool wtw5000dw1 top loader door would not lock, spin cycle would not function John C. • Cornelia , GA • December 24, 2021
Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11474472
The Screw is an OEM part for Whirlpool refrigerators. This screw plays a small but important structural role, securely fastening the refrigerator door hinges in place.
Causes of a bad screw include normal wear and tear, repeated door opening/closing stress, or accidental damage during cleaning or servicing of the hinge area.
Symptoms of a bad hinge screw include:
- Loose or sagging door that does not close or seal properly
- Increased vibration or noise from the hinge area
- Difficulty opening/closing the door smoothly
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759
Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.
Do-It-Yourself Stories from Customers like You
Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2302937
If your refrigerator isn't staying at the right temperature or runs too warm, the thermistor may have failed. This sensor monitors compartment temps.
Do-It-Yourself Stories from Customers like You
The freezer cold but refrigerator too warm. Gerard F. • Honolulu , HI • September 02, 2022
First I did the obvious: Changed the evaporator fan motor and condenser fan motor. Then I realized there was too little air flow from the freezer to the refrigerator, so I replaced the air baffle assembly. Now everything works again.
This should have been a piece of cake, but in the 48" Kitchenaid side-by-side built-in, the baffle assembly is mounted on the side wall of the refrigerator rather than the back wall as the video showed. That means the hole for the rear of the two screws holding...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Broken handle foot pedal and missing parts Donald M. • Lake Arrowhead , CA • April 05, 2015
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400065
This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.
- Fastens panels, brackets, and internal components in the appliance cabinet
- Helps maintain proper alignment and reduce vibration or rattling noises
- Restores a tight fit where original hardware is missing, damaged, or stripped
- Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened
What's included: One screw. Install notes:
- Disconnect power; for gas models, also shut off the gas supply
- Replace one fastener at a time to preserve alignment and match to the original hardware
- Use the correct driver; start threads by hand to avoid cross-threading
- Do not overtighten into sheet metal
Do-It-Yourself Stories from Customers like You
Ice dispenser was skipping so not dispensing ice Del H. • Midlothian , TX • September 03, 2018
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10334458
Connects two sections of water tubing in your refrigerator's supply system. Replace if cracked, leaking, or broken during door removal or transport.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10852517
Ice won't dispense or comes out slowly? A worn or stripped ice auger is often the culprit. This repair restores smooth dispensing in 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Would not dispense ice. Rick C. • Dayton , TX • July 30, 2023
Replaced ice dispenser auger. Old auger is as broken off and had to be ground down to get it out.
Read more
More