Lat2300aae Lav3600aww Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400029
Size: 10-32
Do-It-Yourself Stories from Customers like You
The heating elements were not working, but there was power on the control panel. Miroslav R. • Petaluma , CA • May 08, 2020
Check the power cord connection to the stove and found burned cable due to loose connection.
Replaced the terminal and the nuts and installed a new power cord.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001663
Replace your cracked, stripped, or missing selector knob. Attaches to the control shaft to choose wash cycles and options. Restores smooth operation.
Do-It-Yourself Stories from Customers like You
Broken knobs Billy P. • Moultrie , GA • June 07, 2015
Orde red replacement
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-2114830
This small spacer washer fits in the washer's drive assembly to set the correct clearance between mating parts. Proper spacing helps components rotate smoothly and quietly while minimizing metal-to-metal contact and premature wear.
- Maintains the specified gap and alignment within the drive/brake or pulley stack
- Helps reduce friction, rubbing, and vibration
- A worn, distorted, or missing spacer can contribute to scraping or grinding noises and excess play
- Often replaced during service of related drive components to restore correct stack order
What's included: 1 spacer washer. Install notes:
- Disconnect power before servicing; shut off water if moving the appliance
- Access and procedure vary by model—refer to your unit's service manual or parts diagram for the correct stack order
- Support the appliance if working from below; remove belt/pulley or related parts as required
- Reassemble in the exact order and orientation; verify free rotation before test-running
Do-It-Yourself Stories from Customers like You
Washer would only spin. Byron V. • Bellevue , MI • February 04, 2020
Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable.
In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat.
Long and short the replacement parts fit perfectly and the washer is running like new.
Special thanks to the online support make my repair possible.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10346892
This factory screw secures appliance components such as panels, brackets, and trim. It replaces missing, stripped, or damaged hardware to restore a tight, rattle-free fit and proper alignment in the specified location for your model.
- Fastens covers, panels, brackets, or trim as specified in the parts diagram
- Restores secure fit when an original screw is missing or damaged
- Helps reduce vibration, rattling, and looseness
- Direct-fit hardware specified by the manufacturer for the original location
What's included: One screw. Install notes:
- Disconnect power and shut off water/gas before servicing
- Verify the screw's location in your model's parts diagram before installation
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Use the correct driver/bit and avoid overtightening into plastic to prevent stripping
Do-It-Yourself Stories from Customers like You
I purchased 2 whirlpool xhp1550vw pedestals on clearance and one was missing the screws and pads Evelyn D. • East Moriches , NY • March 03, 2015
By ordering the screws and pads from appliancepartspros.com which were delivered practically overnight! The service was beyond expectations!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP211949
This adjusting nut threads onto an eyebolt to set and lock an adjustment point. It helps maintain proper tension or alignment in the mechanism so the appliance operates smoothly without the setting drifting over time. What it does:
- Threads onto an eyebolt to fine-tune and secure an adjustment
- Helps prevent vibration from loosening the setting
- Replaces a stripped, rounded, or missing nut so adjustments hold
- Visual cues for replacement include damaged threads or worn hex flats
What's included:
Install notes:
- Disconnect power; turn off water or gas supply if applicable
- Components attached to eyebolts may be under spring or mechanical tension—support and relieve tension before removal
- Mark or measure the original setting to match during reassembly
- Start by hand to avoid cross-threading; tighten securely without over-torquing
Do-It-Yourself Stories from Customers like You
May tag washer bumper pads wore out Larry W. • Hookstown , PA • November 18, 2014
I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8534058
Replacement mounting screw for securing panels, brackets, and components in dryers, refrigerators, and washers. Needed when screws are lost or stripped.
Do-It-Yourself Stories from Customers like You
Knob was not turning / changing to correct heating selections Michael H. • Coral Springs , FL • August 03, 2016
This was the perfect replacement part and once installed it fixed itself.
Thank you!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP213325
A small replacement retainer clip that secures panels, trim pieces or small hoses to prevent movement and rattling. Replaces worn or broken clips to restore proper fit and reduce noise from loose parts. What it does
- Secures appliance trim, panels or lightweight components to the cabinet or chassis
- Prevents rattling, vibration noise and misaligned panels caused by a missing or damaged clip
- Holds wiring looms or small hoses in place on select appliance models
- Restores OEM fit where original clip has broken, bent or fallen off
What's included One retainer clip Installation notes
- Disconnect power (and water, if applicable) before servicing the appliance
- Small part — a flat-head screwdriver or needle-nose pliers may be helpful for removal/installation
- Handle sharp edges on panels and wear gloves and eye protection as needed
Do-It-Yourself Stories from Customers like You
Lip seal was leaking oil which is at the part of the transmission housing shaft. Gary B. • Hamilton , OH • April 07, 2017
I emailed appliancepartspros.com with what my problem was and they informed me what was wrong they gave me a part number to order, tools needed and a brief explanation how replace the seal. they also have online video's for different repairs. I watched the video for lip seal(part # 207843) replacement.I also had to remove the brake assembly in order to replace the seal so I watched that video also. I went online and got the part numbers for items I needed to make my repairs.Just follow the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP210385
A replacement nut-lock used to secure fasteners and keep panels or components from backing off due to vibration. Simple, durable hardware that restores a secure connection and reduces rattling or loose parts. What it does:
- Secures a mating bolt or stud to prevent loosening from vibration or movement
- Restores a solid attachment for panels, brackets, or assemblies that may come loose
- Helps eliminate symptoms such as rattling, vibrating, or intermittent panel movement
- Suitable where a locking fastener is required to maintain a reliable connection
What's included: One nut-lock. Install notes:
- Disconnect power and follow appliance safety procedures before starting work
- Locate the matching stud or bolt and remove the old fastener if present
- Use the correct-size wrench or socket and tighten until the nut-lock seats; avoid over-tightening
- Inspect threads and mating hardware for damage; replace damaged components
Do-It-Yourself Stories from Customers like You
Needed new support adjustable legs for my maytag washer Rodger M. • San Clemente , CA • November 17, 2014
Took off the old parts and replaced with the new parts
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002765
Secures washer hoses to fittings for leak-free connections. Replace when worn, cracked, or lost to keep hoses stable. Verify fit with your model number.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400094
Machine screw fastens panels, brackets, and components inside appliances. Replace stripped, missing, or loose screws to restore secure assembly.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11573574
Secures panels and components in place. Replace this fastener if stripped, corroded, or missing to restore proper alignment and eliminate rattling.
Do-It-Yourself Stories from Customers like You
Boot on front had a hole in it Chris R. • Aberdeen , MS • January 22, 2016
Ordered boot watched video had no trouble finding ,parts easily entered part num,no problems at all
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 205000
Washer won't spin or spins slowly? This motor mount roller and spring kit restores proper spin performance. Moderately easy DIY repair with video guide.
This part fixes the following symptoms
-
Will not agitate
-
Burning smell
See more...
Do-It-Yourself Stories from Customers like You
Maytag clothes washer would not spin or drain Ben M. • Wallingford , CT • September 29, 2018
The washer was on, and I heard a faint humming sound in the laundry room. I went in and opened the washer and it was full of soapy water in the middle of its cycle and was not agitating. I also smelled a faint burning smell.
At this point I figured the problem was a bad motor, as the washer is more than 20 years old. I have fixed it twice before, because the first time, the repairman said I should keep this washer going as long as possible. It was made to last with a metal drum, unlike newer...
Read more
More
$54.25
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001908
Fixes washer that won't agitate, spin, or start. If your washer stops mid-cycle or won't run with lid closed, this lid switch kit restores operation.
This part fixes the following symptoms
-
Will not fill with water
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Washer would not turn on Anthony W. • Washington , DC • October 23, 2014
No water, no electricity, nothing happened when I pulled the on knob. I replaced the lid switch. The switch arrived at my house super fast - ordered on Friday and was there on Saturday. The whole replacement process took no time at all.
Read more
More
$23.42
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 207843
Prevents oil leaks from the transmission area. Replace if you see oil puddles under your washer. Confirm fit with your model number before ordering.
Do-It-Yourself Stories from Customers like You
Bearings were worn out makeing a lot of noise Lawrence L. • Largo , FL • August 08, 2015
I had a lot of problems removing the spin hub, I had to use an air impact wrench to un screw it even then it was very hard, it did not go easy with the hammer & pipe wrench as shown in the video. It was also very hard to remove the bottom spin bearing I had to cut the bearing retainer with a dremel tool so I could get my puller on it. After I struggled to get it apart The repair went very easy, I used brake spring pliers to remove the springs it worked like a charm. I am very pleased with...
Read more
More
$6.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 22001299
Seals the top of the outer tub to prevent leaks and splashing. Replace if cracked, worn through, or gasket is compressed causing water to escape onto the floor.
Do-It-Yourself Stories from Customers like You
Water was dropping from the tub cover and gasket Chad M. • Avenel , NJ • March 18, 2015
Removed the old tub cover/gasket by removing the front panel and top lid. Then, unclipped the tub cover.
Read more
More
$157.35
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP215395
Washer won't spin or spins weakly? A worn clutch plate causes slipping and shuddering during spin cycles. Moderate DIY repair restores reliable performance.
Do-It-Yourself Stories from Customers like You
Washer would only spin. Byron V. • Bellevue , MI • February 04, 2020
Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable.
In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat.
Long and short the replacement parts fit perfectly and the washer is running like new.
Special thanks to the online support make my repair possible.
Read more
More
$5.95
Out Of Stock
Usually ships within 4 - 14 days