Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Incudes latch and safety switches.
The Dishwasher Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting the door's position, ensuring the dishwasher only operates when the door is securely closed. This switch helps maintain safety and proper functioning during the wash cycle.
Causes of a bad micro switch can include wear and tear from regular use, electrical malfunctions, or physical damage. A compromised micro switch can prevent the dishwasher from starting or stopping correctly.
Symptoms of a bad dishwasher micro switch include:
This OEM LG part is also compatible with Sears/Kenmore models.
This was a very simple repair. It was done in about an hour. It involves disconnecting the dishwasher, emptying the water from the inside, taking it out and flipping it over, and replacing the diverter motor. This repair is done on the underside of the dishwasher, nothing to disconnect inside (just remember to remove the baskets). It would be wise to order the motor seal and micro switch that goes with it as they are all cheap parts and easy to swap out during the procedure. Be sure to take... Read more
Captures food particles and debris to maintain proper water flow. Replace when clogged or damaged to restore filtering performance. Confirm fit with your model.
A new rubber fitting at the base. Read more
Dishwasher not filling with water or leaking? The float assembly monitors water levels and prevents overfills. Moderate DIY repair, 1-2 hours.
I bought a new controller first and installed it. The exact replacement controller was no longer available and I had to modify two AC connectors that changed from 3 pins with two wires to two pins with two wires. This was not expected but I made it work just fine by getting the three pin connectors on the cable to fit the two pin by breaking out the center web in the board two pin and then shaving off the raised key plastic on the wires. Then on power up, I found that the wash motor did not... Read more
Lower rack assembly for dishwashers. Holds dishes, utensils, and cookware during wash cycles. Replace if cracked, broken, or wheels are worn or missing.
Fix poor cleaning or weak spray with a new dishwasher spray arm manifold. Distributes water to all spray arms for complete dish coverage. DIY repair.
They helped me over the phone to get the right part and sent it to me, easy fix. Read more
Fix OE drainage errors and mid-cycle overfilling with this dishwasher check valve. Prevents water backflow into the tub. Easy 30-minute repair for most DIYers.
So all of a sudden the dishwasher stops working, "0E error"on the panel. Did some google searches and found that it might be the filter, which I did not know needed to be changed, or worse, the motor. Took the filter off per online tutorial (easy) and mopped up all the stagnant water. Poking around, I find the small rubber check valve that has broken. Had to fish it out with tweezers. Long story short, it was not the motor and I doubt it was the filter. It was this $1.87 rubber drainage... Read more
Fix incomplete draining and pulsing sounds during drain cycles. This dishwasher check valve prevents backflow. Easy 30-minute DIY repair.
First determined drain discharge hose was clear. Turned of power to dishwasher. I did not find it necessary to remove the dishwasher. I simply removed the lower service panel at the floor and was able to easily remove the defective pump, unplug it, replace the small rubber check valve flapper before the pump inlet and reinstall the new pump assembly. The dishwasher surprisingly cleans and runs quietly like new again although I found no excuse for the pump failure as it is well designed. Never... Read more
Dispenser not opening or leaking rinse aid down the door? This assembly restores proper detergent release. Most DIYers complete installation in 30-60 minutes.
I ordered a new vario motor and a soap dispenser. I turned off the water and the breaker, disconnected the water line and the power at the front base of the unit, disconnected the drain hose from the garbage dispenser, and pulled out the dishwasher and laid it on a blanket on its face. I unscrewed and removed the plainly visible vario motor on the bottom of the machine and removed the cam from the shaft. I then used a needle nose plier to carefully turn the D-shaft on the new motor to exactly... Read more
Replace your dishwasher's upper spray arm if cracked, broken, or clogged beyond cleaning. Installs in the top of the tub to spray water on the upper rack.
I replaced the upper nozzle guide, nozzle shaft and upper spray arm. I also replaced the pump gasket for good measure. Top rack dishes had not been cleaning properly. I first removed the filter assembly to inspect the main pump from above. It was clogged but after cleaning and reassembly I observed that while middle and bottom spray arms were changing position, the upper spray arm was not. I confirmed that water was flowing through the upper spray arm by placing some empty yogurt pots on a... Read more
Counterbalances your dishwasher door for smooth opening and controlled positioning. Replace this spring if weakened, broken, or missing to restore tension.
I went to AppliancePartsPros.com and looked at the parts breakdown for the door. I had assumed a broken spring or cable so I found and ordered them. Having never changed them on an LG, I watched the video. I now new what to do. The hardest part of the whole job was pulling out the dishwasher to get at the springs and cables. There was enough slack in the hoses and wire to get it out without disconnecting them. Start to finish took less than thirty minutes. Read more
This is an electronic noise filter assembly that mounts on the dishwasher's power supply line. It suppresses electromagnetic interference generated by the dishwasher's motor and electronic controls, preventing it from affecting other appliances or electronics on the same circuit. Replace this part if the dishwasher trips breakers, fails to power on, or if you notice electrical interference with nearby devices when the dishwasher is running.
Replaced noise filter. Read more
Pivot shaft that supports and allows the upper spray arm to rotate in your dishwasher. Replace if broken, cracked, or worn to restore proper arm movement.
This is a plastic bracket that holds the roller wheel on the dishwasher dish rack, allowing the rack to slide in and out smoothly on its track. It mounts to the side of the upper or lower rack and secures the roller in place. Replace this bracket if it is cracked or broken, causing the dish rack to tilt, jam, or not roll properly on its rails.
Phillips head screwdriver was all I needed. Saw a few videos on youtube. Read more
The Shaft,Nozzle is an OEM part for LG dishwashers. This part is located inside the dishwasher's spray arm assembly and is responsible for distributing water to the spray arms during the wash cycle.
Causes of failure can be mineral deposits that clog the nozzle openings or flexible shaft deterioration over time.
Symptoms of a bad shaft or nozzle include:
This OEM LG part is also compatible with some Kenmore models.
Lower spray arm assembly mounts at the bottom of the dishwasher tub and rotates to distribute wash water. Replace if cracked, clogged, or broken.
Replaced the parts per my order Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.